TPS3809L30MDBVREP

TPS3809L30-EP, TPS3809K33-EP, TPS3809I50-EP 3-PIN SUPPLY VOLTAGE SUPERVISORS www.ti.com SGLS369A – AUGUST 2006 – REVISED NOVEMBER 2006 FEATURES • • • • • • • (1) Controlled Baseline – One Assembly Site – One Test Site – One Fabrication Site Extended Temperature Performance of –55°C to 125°C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change Notification Qualification Pedigree (1) 3-Pin SOT-23 Package Supply Current of 9 µA (Typical) • • • Precision Supply Voltage Monitor 2.5 V, 3 V, 3.3 V, 5 V Power-On Reset Generator With Fixed Delay Time of 200 ms Pin-for-Pin Compatible With MAX 809 DBV PACKAGE (TOP VIEW) GND 1 3 RESET VDD 2 Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. DESCRIPTION The TPS3809 family of supervisory circuits provides circuit initialization and timing supervision, primarily for DSPs and processor-based systems. During power-on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time, td(typ) = 200 ms, starts after VDD has risen above the VIT. When the supply voltage drops below the VIT, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense VIT set by an internal voltage divider. The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are available in a 3-pin SOT-23 package. The TPS3809 devices are characterized for operation over a temperature range of –55°C to 125°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2006, Texas Instruments Incorporated TPS3809L30-EP, TPS3809K33-EP, TPS3809I50-EP 3-PIN SUPPLY VOLTAGE SUPERVISORS www.ti.com SGLS369A – AUGUST 2006 – REVISED NOVEMBER 2006 TYPICAL APPLICATIONS TPS76333 3.3 V 5V IN OUT GND VDD TMS320LC54x VDD TPS3809K33 RESET RESET GND GND D Applications Using DSPs, Microcontrollers, or Microprocessors D D Wireless Communication Systems D D Programmable Controls D D Industrial Equipment D Automotive Systems Portable/Battery-Powered Equipment Intelligent Instruments Notebook/Desktop Computers AVAILABLE OPTIONS TA –55°C to 125°C (1) DEVICE NAME THRESHOLD VOLTAGE MARKING TPS3809L30MDBVREP (1) 2.64 V PLYM TPS3809K33MDBVREP (1) 2.93 V PLZM TPS3809I50MDBVREP (1) 4.55 V PMAM The DBVR passive indicates tape and reel of 3000 parts. ORDERING INFORMATION FUNCTION/TRUTH TABLE VDD > VIT RESET 0 L 1 H TPS380 9 L 30 M DBV R EP Enhanced Plastic Reel Package Temperature Nominal Supply Voltage Nominal Threshold Voltage Functionality Family 2 Submit Documentation Feedback TPS3809L30-EP, TPS3809K33-EP, TPS3809I50-EP 3-PIN SUPPLY VOLTAGE SUPERVISORS www.ti.com SGLS369A – AUGUST 2006 – REVISED NOVEMBER 2006 FUNCTIONAL BLOCK DIAGRAM TPS3809 R1 _ VDD + Reset Logic + Timer RESET R2 GND Oscillator Reference Voltage of 1.137 V TIMING DIAGRAM VDD V(NOM) VIT 1.1 V ÎÎ ÎÎ ÎÎ ÎÎ ÎÎ ÎÎ ÎÎ ÎÎ ÎÎ ÎÎ ÎÎ ÎÎ RESET 1 0 td t t td For VDD < 1.1 V Undefined Behavior of RESET Output Submit Documentation Feedback 3 TPS3809L30-EP, TPS3809K33-EP, TPS3809I50-EP 3-PIN SUPPLY VOLTAGE SUPERVISORS www.ti.com SGLS369A – AUGUST 2006 – REVISED NOVEMBER 2006 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VDD Supply voltage (2) UNIT 7 All other pins –0.3 V 7 IOL Maximum low output current 5 mA IOH Maximum high output current –5 mA IIK Input clamp current VI < 0 or VI > VDD ±20 mA IOK Output clamp current VO < 0 or VO > VDD ±20 mA Continuous total power dissipation See Dissipation Rating Table TA Operating free-air temperature range –55 125 °C Tstg Storage temperature range –65 150 °C 260 °C Soldering temperature (1) (2) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values are with respect to GND. For reliable operation the device should not be operated at 7 V for more than t = 1000h continuously. Dissipation Ratings PACKAGE TA < 25°C POWER RATING DERATING FACTOR ABOVE TA = 25°C TA = 70°C POWER RATING TA = 85°C POWER RATING DBV 437 mW 3.5 mW/°C 280 mW 227 mW Recommended Operating Conditions 4 VDD Supply voltage TA Operating free-air temperature Submit Documentation Feedback MIN MAX 2 6 UNIT V –55 125 °C TPS3809L30-EP, TPS3809K33-EP, TPS3809I50-EP 3-PIN SUPPLY VOLTAGE SUPERVISORS www.ti.com SGLS369A – AUGUST 2006 – REVISED NOVEMBER 2006 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VOH VOL TEST CONDITIONS High-level output voltage Low-level output voltage Power-up reset voltage (1) MIN VDD = 2.5 V to 6 V, IOH = –500 µA VDD – 0.2 VDD = 3.3 V, IOH = –2 mA VDD – 0.4 VDD = 6 V, IOH = –4 mA VDD – 0.4 VDD = 6 V, IOH = –4 mA, VDD = 2 V to 6 V, IOL = 500 µA 0.2 VDD = 3.3 V, IOL = 2 mA 0.4 VDD = 6 V, IOL = 4 mA 0.4 VDD ≥ 1.1 V, IOL = 50 µA 0.2 TA = 125°C TPS3809L30 VIT– Negative-going input threshold voltage (2) TPS3809K33 TPS3809I50 Vhys Hysteresis IDD Supply current Ci Input capacitance (1) (2) TY MAX P UNIT V VDD – 0.5 2.58 2.6 4 2.7 2.87 2.9 3 2.99 4.45 4.5 5 4.65 TPS3809L30 35 TPS3809K33 40 TPS3809I50 60 V V mV VDD = 2 V, Output unconnected 9 12 VDD = 6 V, Output unconnected 20 25 VI = 0 V to VDD V µA 5 pF The lowest supply voltage at which RESET becomes active. tr, VDD ≥ 15 µs/V. To ensure best stability of the threshold voltage, a bypass capacitor (0.1-µF ceramic) should be placed near the supply terminals. Timing Requirements RL = 1 MΩ, CL = 50 pF, TA = 25°C PARAMETER tw Pulse width at VDD TEST CONDITIONS MIN VDD = VIT– + 0.2 V, VDD = VIT– – 0.2 V 3 MAX UNIT µs Switching Characteristics RL = 1 MΩ, CL = 50 pF, TA = 25°C PARAMETER td Delay time tPHL Propagation (delay) time, high- to low-level output TEST CONDITIONS VDD ≥ VIT– + 0.2 V, See timing diagram VDD to RESET delay VIL = VIT– – 0.2 V, VIH = VIT– + 0.2 V Submit Documentation Feedback MIN TYP MAX UNIT 120 200 280 ms 1 ms 5 TPS3809L30-EP, TPS3809K33-EP, TPS3809I50-EP 3-PIN SUPPLY VOLTAGE SUPERVISORS www.ti.com SGLS369A – AUGUST 2006 – REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 2.75 HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 6.5 VDD = 2.5 V TA = 25°C 1.75 1.50 TA = 85°C 1.25 TA = 0°C 1.00 0.75 TA =−40°C 0.50 VOH − High-Level Output Voltage − V VOL − Low-Level Output Voltage − V 2.25 2.00 VDD = 6 V 6.0 2.50 0.25 5.5 5.0 4.5 TA =−40°C 4.0 3.5 TA = 0°C 3.0 TA = 85°C 2.5 2.0 1.5 1.0 TA = 25°C 0.5 0.00 0.0 0.0 2.5 5.0 7.5 10.0 12.5 0 −10 IOL − Low-Level Output Current − mA Figure 1. Normalized Threshold Voltage V IT (T A ), V IT (25 ° C) VOH − High-Level Output Voltage − V 2.50 2.25 2.00 TA =−40°C 1.75 1.50 TA = 0°C 1.25 1.00 TA = 85°C 0.75 0.50 TA = 25°C 0.25 0.00 0 −50 −2 −4 −6 −8 IOH − High-Level Output Current − mA −10 1.001 VDD = 2.3 V 1.000 0.999 0.998 0.997 0.996 0.995 −40 Figure 3. 6 −40 NORMALIZED INPUT THRESHOLD VOLTAGE vs FREE-AIR TEMPERATURE AT VDD VDD = 2.5 V 2.75 −30 Figure 2. HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 3.00 −20 IOH − High-Level Output Current − mA −20 0 20 40 60 TA − Free-Air Temperature − °C Figure 4. Submit Documentation Feedback 85 TPS3809L30-EP, TPS3809K33-EP, TPS3809I50-EP 3-PIN SUPPLY VOLTAGE SUPERVISORS www.ti.com SGLS369A – AUGUST 2006 – REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) MINIMUM PULSE DURATION AT VDD vs VDD THRESHOLD OVERDRIVE VOLTAGE t w − Minimum Pulse Duration at V DD − µs 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.0 0.2 0.4 0.6 0.8 1.0 VDD − Threshold Overdrive Voltage − V Figure 5. Submit Documentation Feedback 7 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) TPS3809I50MDBVREP ACTIVE SOT-23 DBV 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 PMAM TPS3809K33MDBVREP ACTIVE SOT-23 DBV 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 PLZM TPS3809L30MDBVREP ACTIVE SOT-23 DBV 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 PLYM V62/06636-01XE ACTIVE SOT-23 DBV 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 PLYM V62/06636-02XE ACTIVE SOT-23 DBV 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 PLZM V62/06636-03XE ACTIVE SOT-23 DBV 3 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -55 to 125 PMAM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of