CYW20732S

CYPRESS CYW20732:SINGLE-CHIP BLUETOOTH LOW ENERGY-ONLY SOC P R O D UC T O VE RVI EW OVERVIEW F E AT U R E S The Cypress CYW20732 is a Bluetooth Low-Energy (BLE)-only System-on-a-Chip (SoC). The CYW20732 radio has been designed to provide low power, low cost, and robust communications for applications operating in the globally available 2.4 GHz unlicensed Industrial, Scientific, and Medical (ISM) band. • BLE-compliant The single-chip BLE SoC is a monolithic component implemented in a standard digital CMOS process and requires minimal external components to make a fully compliant Bluetooth device. The CYW20732 is available in a 32-pin, 5 mm × 5 mm 32-QFN package. KEY FEATURES APPLICATIONS • BLE-compliant single-mode solution • Integrated ARM® Cortex™-M3 microcontroller unit (MCU), radio frequency and embedded BLE stack all on a single chip • Full software support, including GATT, profiles, stack, APIs and application software development kit • Power optimized for single-mode coin cell operation and from 1.2V supply • On-chip support for two serial peripheral interfaces • Onboard 12-bit analog-to-digital converter • Onboard wake-up timer The following profiles are supported in ROM: CYW20732      www.cypress.com Medical Devices Sports and Fitness Security Systems Remote Controls Set-topBoxes • Battery status • Infrared modulator • IR learning • Supports Adaptive Frequency Hopping • Excellent receiver sensitivity • 10-bit auxiliary ADC with 9 analog channels • On-chip support for serial peripheral interface (master and slave modes) • Cypress Serial Communications (CSC) interface (compatible with NXP®) I2C slaves • Blood pressure monitor • Programmable output power control • Find me • Integrated ARM®Cortex™-M3 based • Heart rate monitor • Proximity • Thermometer • Weight scale • Time microprocessor core • On-chip power-on reset (POR) • Support for EEPROM and serial flash interfaces • Integrated low-dropout regulator (LDO) • On-chip software controlled power manage- Additional profiles that can be supported from RAM include: • Blood glucose monitor • Temperature alarm • Location BENEFITS • Easy-to-use application development environment for rapid application prototyping • Open source-based Integrated Development Environment (IDE) and toolchain • Fully integrated with the Cypress Wireless Internet Connectivity for Embedded Devices (WICED) portfolio featuring embedded WiFi and BLE IoT solutions • Complies with all of the relevant regulatory and manufacturing standards ment unit • RoHS compliant P R O D UC T O VE RVI EW CYW20732 System Block Diagram The CYW20732 provides all the components for an integrated BLE peripheral design (MCU, RF, ADC DAC, timers, stack, and so forth) on a single piece of silicon. The CYW20732 is also backed by a rich ecosystem of hardware, software, and application partners and leverages Cypress's world leading connectivity portfolio (Bluetooth, GPS, NFC, and WiFi) to accelerate the development of unique products that drive differentiation and increase market share. Part number ORDERING INFORMATION CYW20732A1KML2G 32-pin, 5 mm × 5 mm 32-QFN package For additional information on WICED modules currently in production, go to: http://community.cypress.com/community/wicedwifi Cypress Semiconductor Corporation 198 Champion Court, San Jose CA 95134 phone +1 408.943.2600 fax +1 408.943.6848 toll free +1 800.858.1810 (U.S. only) Press “1” to reach your local sales representative © 2016 -2017 Cypress Semiconductor Corporation. All rights reserved. All other trademarks are the property of their respective owners. 002-14836 Rev *A