19-4728; Rev 7; 9/08
Improved, Quad,
SPST Analog Switches
______________________New Features
Maxim’s redesigned DG411/DG412/DG413 analog
switches now feature low on-resistance matching
between switches (3Ω max) and guaranteed on-resistance flatness over the signal range (Δ4Ω max). These
low on-resistance switches conduct equally well in
either direction. They guarantee low charge injection,
low power consumption, and an ESD tolerance of
2000V minimum per Method 3015.7. The new design
offers lower off-leakage current over temperature (less
than 5nA at +85°C).
The DG411/DG412/DG413 are quad, single-pole/single-throw (SPST) analog switches. The DG411 is normally closed (NC), and the DG412 is normally open
(NO). The DG413 has two NC switches and two NO
switches. Switching times are less than 150ns max for
tON and less than 100ns max for tOFF. These devices
operate from a single +10V to +30V supply, or bipolar
±4.5V to ±20V supplies. Maxim’s improved
DG411/DG412/DG413 are fabricated with a 44V silicongate process.
♦ Plug-In Upgrade for Industry-Standard
DG411/DG412/DG413
♦ Improved RDS(ON) Match Between Channels
(3Ω max)
♦ Guaranteed RFLAT(ON) Over Signal Range (Δ4Ω)
♦ Improved Charge Injection (10pC max)
♦ Improved Off-Leakage Current Over Temperature
(< 5nA at +85°C)
♦ Withstand Electrostatic Discharge (2000V min)
per Method 3015.7
__________________Existing Features
♦
♦
♦
♦
♦
♦
Low RDS(ON) (35Ω max)
Single-Supply Operation +10V to +30V
Bipolar-Supply Operation ±4.5V to ±20V
Low Power Consumption (35µW max)
Rail-to-Rail Signal Handling
TTL/CMOS-Logic Compatible
Ordering Information
________________________Applications
Sample-and-Hold Circuits
PART
TEMP RANGE
PIN-PACKAGE
Communication Systems
DG411CJ
Test Equipment
Battery-Operated Systems
DG411CUE
0°C to +70°C
16 TSSOP
Heads-Up Displays
PBX, PABX
DG411EUE
-40°C to +85°C
16 TSSOP
Guidance & Control Systems
Audio Signal Routing
DG411CY
0°C to +70°C
16 Narrow SO
DG411C/D
0°C to +70°C
Dice†
Military Radios
0°C to +70°C
16 Plastic DIP
Ordering Information continued at end of data sheet.
†Contact factory for dice specifications.
Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
IN1
1
16
IN2
IN1
1
16
IN2
IN1
1
16
D1
2
15
D2
D1
2
15
D2
D1
2
15
D2
S1
3
14
S2
S1
3
14
S2
S1
3
14
S2
13
V+
V-
4
13
V+
V-
4
13
V+
12
VL
GND
5
12
VL
GND
5
12
VL
11
S3
S4
6
11
S3
10
D3
9
IN3
V-
4
GND
5
S4
6
11
S3
S4
6
D4
7
10
D3
D4
7
10
D3
D4
7
IN4
8
9
IN3
IN4
8
9
IN3
IN4
8
DG411
DG412
DIP/SO/TSSOP
DIP/SO/TSSOP
DG411
DG412
LOGIC
SWITCH
LOGIC
SWITCH
0
ON
OFF
0
1
OFF
ON
1
DG413
IN2
DIP/SO/TSSOP
LOGIC
DG413
SWITCHES
1, 4
SWITCHES
2, 3
0
1
OFF
ON
ON
OFF
SWITCHES SHOWN FOR LOGIC “0” INPUT
Pin Configurations and Functional Diagrams continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
1
DG411/DG412/DG413
General Description
DG411/DG412/DG413
Improved, Quad,
SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
(All Voltages Referenced to V-.)
V+.........................................................................................44V
GND .....................................................................................25V
VL .....................................................(GND -0.3V) to (V+ +0.3V)
Digital Inputs, VS, VD (Note 1)........(V- -2V) to (V+ +2V) or 30mA
(whichever occurs first)
Continuous Current (any terminal) ......................................30mA
Peak Current
(pulsed at 1ms, 10% duty cycle max) ............................100mA
Continuous Power Dissipation (TA = +70°C)
16-Pin Plastic DIP (derate 10.53mW/°C above +70°C) .842mW
16-Pin Narrow SO (derate 8.70mW/°C above +70°C) ...696mW
16-Pin CERDIP (derate 10.00mW/°C above +70°C)......800mW
16-Pin TSSOP (derate 6.7mW/°C above +70°C) ...........457mW
16-Pin QFN (derate 19.2mW/°C above +70°C) ...........1538mW
Operating Temperature Ranges
DG41_C_ ..............................................................0°C to +70°C
DG41_D_ ...........................................................-40°C to +85°C
DG41_AK_ .......................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum
current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = 15V, V- = -15V, VL = 5V, VGND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
MIN
TYP
(Note 2)
MAX
UNITS
15
V
C, D
17
45
A
17
CONDITIONS
SWITCH
Analog Signal Range
Drain-Source
On-Resistance
VANALOG
(Note 3)
RDS(ON)
V+ = 13.5V,
V- = -13.5V,
VD = ±8.5V,
IS = -10mA
-15
TA = +25°C
30
TA = TMIN to TMAX
45
On-Resistance
Match Between Channels
(Note 4)
ΔRDS(ON)
V+ = 15V, V- = -15V,
VD = ±10V,
IS = -10mA
TA = +25°C
3
TA = TMIN to TMAX
5
On-Resistance Flatness
(Note 4)
V+ = 15V, V- = -15V,
RFLAT(ON) VD = ±5V, 0V,
IS = -10mA
TA = +25°C
4
TA = TMIN to TMAX
6
Source Off-Leakage Current
(Note 7)
Drain Off-Leakage Current
(Note 7)
IS(OFF)
V+ = 16.5V,
V- = -16.5V,
VD = ±15.5V,
VS = ±15.5V
ID(OFF)
V+ = 16.5V,
V- = -16.5V,
VD = ±15.5V,
VS = ±15.5V
ID(ON)
Drain On-Leakage Current
(Note 7)
2
+
IS(ON)
V+ = 16.5V,
V- = -16.5V,
VD = ±15.5V,
VS = ±15.5V
TA = +25°C
C, D, A
TA = TMIN to
TMAX
C, D
-0.25
-5
5
A
-10
10
TA = +25°C
C, D, A
TA = TMIN to
TMAX
C, D
-5
5
A
-10
10
TA = +25°C
C, D, A
-0.4
TA = TMIN to
TMAX
C, D
-20
20
A
-40
40
-0.25
-0.10
-0.10
-0.1
_______________________________________________________________________________________
Ω
Ω
Ω
0.25
nA
0.25
nA
0.4
nA
Improved, Quad,
SPST Analog Switches
(V+ = 15V, V- = -15V, VL = 5V, VGND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
Input Current with Input Voltage
High
IINH
Input Current with Input Voltage
Low
IINL
MIN
TYP
(Note 2)
MAX
IN = 2.4V, all others = 0.8V
-0.500
0.005
0.500
µA
IN = 0.8V, all others = 2.4V
-0.500
0.005
0.500
µA
±20.0
V
CONDITIONS
UNITS
INPUT
SUPPLY
Power-Supply Range
Positive Supply Current
Negative Supply Current
Logic Supply Current
Ground Current
±4.5
I+
I-
IL
IGND
All channels on or off,
V+ = 16.5V,
V- = -16.5V,
VIN = 0V or 5V
All channels on or off,
V+ = 16.5V,
V- = -16.5V,
VIN = 0V or 5V
All channels on or off,
V+ = 16.5V,
V- = -16.5V,
VIN = 0V or 5V
All channels on or off,
V+ = 16.5V,
V- = -16.5V,
VIN = 0V or 5V
TA = +25°C
-1
TA = TMIN to TMAX
-5
TA = +25°C
-1
TA = TMIN to TMAX
-5
TA = +25°C
-1
TA = TMIN to TMAX
-5
TA = +25°C
-1
TA = TMIN to TMAX
-5
0.0001
1
µA
5
-0.0001
1
µA
5
0.0001
1
µA
5
-0.0001
1
µA
5
DYNAMIC
Turn-On Time
tON
VD = ±10V,
Figure 2
TA = +25°C
Turn-Off Time
tOFF
VD = ±10V,
Figure 2
TA = +25°C
Break-Before-Make Time Delay
tD
Charge Injection (Note 3)
Q
Off-Isolation (Note 5)
OIRR
Crosstalk (Note 6)
DG413 only,
RL = 300Ω,
CL = 35pF, Figure 3
CL = 1.0nF,
VGEN = 0V,
RGEN = 0Ω, Figure 4
RL = 50Ω,
CL = 5pF,
f = 1MHz, Figure 5
RL = 50Ω,
CL = 5pF,
f = 1MHz, Figure 6
110
TA = TMIN to TMAX
175
220
100
TA = TMIN to TMAX
145
160
ns
ns
TA = +25°C
25
ns
TA = +25°C
5
TA = +25°C
68
dB
TA = +25°C
85
dB
10
pC
Source Off-Capacitance
CS(OFF)
f = 1MHz, Figure 7
TA = +25°C
9
pF
Drain Off-Capacitance
CD(OFF)
f = 1MHz, Figure 7
TA = +25°C
9
pF
Drain On-Capacitance
CD(ON) +
CS(ON)
f = 1MHz, Figure 8
TA = +25°C
35
pF
_______________________________________________________________________________________
3
DG411/DG412/DG413
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)
DG411/DG412/DG413
Improved, Quad,
SPST Analog Switches
ELECTRICAL CHARACTERISTICS—Single Supply
(V+ = 12V, V- = 0V, VL = 5V, VGND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
(Note 2)
MAX
UNITS
SWITCH
Analog Signal Range
VANALOG
(Note 3)
0
RDS(ON)
V+ = 10.8V,
VD = 3.8V,
IS = -10mA
TA = +25°C
Drain-Source On-Resistance
All channels on or off,
V+ = 13.2V,
VIN = 0V or 5V
TA = +25°C
-1
TA = TMAX
-5
All channels on or off,
V+ = 13.2V,
VIN = 0V or 5V
TA = +25°C
-1
TA = TMAX
-5
All channels on or off,
VL = 5.25V,
VIN = 0V or 5V
TA = +25°C
-1
TA = TMAX
-5
All channels on or off,
VL = 5.25V,
VIN = 0V or 5V
TA = +25°C
-1
TA = TMAX
-5
12
40
TA = TMIN to TMAX
80
100
V
Ω
SUPPLY
Positive Supply Current
Negative Supply Current
Logic Supply Current
Ground Current
I+
I-
IL
IGND
0.0001
1
µA
5
0.0001
1
µA
5
0.0001
1
µA
5
-0.0001
1
µA
5
DYNAMIC
Turn-On Time
tON
VS = 8V,
Figure 2
TA = +25°C
Turn-Off Time
tOFF
VS = 8V,
Figure 2
TA = +25°C
Break-Before-Make Time Delay
Charge Injection
(Note 3)
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
4
175
TA = TMIN to TMAX
250
315
95
TA = TMIN to TMAX
125
140
tD
DG413 only,
RL = 300Ω, CL = 35pF,
Figure 3
TA = +25°C
25
Q
CL = 1.0nF,
VGEN = 0V,
RGEN = 0V,
Figure 4
TA = +25°C
5
ns
ns
ns
10
pC
The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Guaranteed by design.
ΔRON = ΔRON max - ΔRON min. On-resistance match between channels and flatness are guaranteed only with
bipolar-supply operation. Flatness is defined as the difference between the maximum and minimum value of on-resistance
as measured at the extremes of the specified analog signal range.
Off-Isolation = 20log(VD/VS), VD = output, VS = input to off switch. See Figure 5.
Between any two switches. See Figure 6.
Leakage parameters IS(OFF), ID(OFF), and ID(ON) are 100% tested at the maximum-rated hot temperature and guaranteed
by correlation at +25°C.
_______________________________________________________________________________________
Improved, Quad,
SPST Analog Switches
TA = +125°C
B
30
C
V+ = 5V
100
80
20
20
V+ = 15V
TA = +25°C
-10
0
10
20
20
-10
0
0
20
10
15
10
20
VD (V)
VD (V)
ON-RESISTANCE vs. VD
(SINGLE SUPPLY)
OFF-LEAKAGE CURRENTS vs.
TEMPERATURE
ON-LEAKAGE CURRENTS vs.
TEMPERATURE
TA = +85°C
50
TA = +25°C
OFF-LEAKAGE (nA)
60
40
100
10
ON-LEAKAGE (nA)
10
TA = +125°C
V+ = 16.5V
V- = -16.5V
VD = ±15V
VS = ±15V
1
0.1
0.01
0.001
30
10
15
+25
+125
-55
+25
SUPPLY CURRENT vs. TEMPERATURE
100
DG411-07
60
V+ = 15V
V- = -15V
VL = 5V
+125
TEMPERATURE (°C)
CHARGE INJECTION vs.
ANALOG VOLTAGE
CL = 1nF
A: I+ at V+ = 16.5V
B: I- at V- = -16.5V
C: IL at VL = 5V
10
20
1
I+, I-, IL (μA)
Q (pC)
0.01
TEMPERATURE (°C)
VD (V)
40
0.1
0.0001
-55
20
1
0
0.01
-40
0.001
-60
A
B
0.1
-20
DG411-08
5
V+ = 16.5V
V- = -16.5V
VD = ±15V
VS = ±15V
0.001
0.0001
20
DG411-06
100
DG411-04
V+ = 12V
V- = 0V
0
5
VD (V)
80
70
-20
DG411-05
-20
V+ = 20V
40
TA = -55°C
0
0
V+ = 10V
60
10
10
RDS(ON) (Ω)
120
TA = +85°C
30
D
V- = 0V
140
RDS(ON) (Ω)
40
V+ = 15V
V- = -15V
40
RDS(ON) (Ω)
RDS(ON) (Ω)
50
50
A
160
DG411-02
A: V+ = 5V,
V- = -5V
B: V+ = 10V,
V- = -10V
C: V+ = 15V,
V- = -15V
D: V+ = 20V,
V- = -20V
60
60
DG411-01
70
ON-RESISTANCE vs. VD AND
TEMPERATURE (SINGLE SUPPLY)
ON-RESISTANCE vs. VD AND
TEMPERATURE
DG411-03
ON-RESISTANCE vs. VD AND
POWER-SUPPLY VOLTAGE
C
0.0001
-20
-15 -10
-5
0
VD (V)
5
10
15
20
-55
+25
+125
TEMPERATURE (°C)
_______________________________________________________________________________________
5
DG411/DG412/DG413
__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
DG411/DG412/DG413
Improved, Quad,
SPST Analog Switches
Pin Description
PIN
NAME
FUNCTION
DIP/SO/TSSOP
QFN
1, 16, 9, 8
15, 14, 7, 6
IN1–IN4
2, 15, 10, 7
16, 13, 8, 5
D1–D4
Analog Switch Drain Terminal
3, 14, 11, 6
1, 12, 9, 4
S1–S4
Analog Switch Source Terminal
4
2
V-
Negative-Supply Voltage Input
Input
5
3
GND
12
10
VL
Logic Supply Voltage
Ground
13
11
V+
Positive-Supply Voltage Input—Connected to Substrate
—
—
EP
Exposed Paddle (QFN Only). Connect EP to V+.
__________Applications Information
Operation with Supply Voltages
Other Than 15V
Using supply voltages other than 15V will reduce the
analog signal range. The DG411/DG412/DG413 switches operate with ±4.5V to ±20V bipolar supplies or with
a +10V to +30V single supply; connect V- to 0V when
operating with a single supply. Also, all device types
can operate with unbalanced supplies such as +24V
and -5V. VL must be connected to +5V to be TTL compatible, or to V+ for CMOS-logic level inputs. The
Typical Operating Characteristics graphs show typical
on-resistance with ±15V, ±10V, and ±5V supplies.
(Switching times increase by a factor of two or more for
operation at ±5V.)
Overvoltage Protection
Proper power-supply sequencing is recommended for
all CMOS devices. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices.
Always sequence V+ on first, followed by VL, V-, and
logic inputs. If power-supply sequencing is not possible, add two small, external signal diodes in series with
supply pins for overvoltage protection (Figure 1).
6
Adding diodes reduces the analog signal range to 1V
below V+ and 1V below V-, without affecting low switch
resistance and low leakage characteristics. Device
operation is unchanged, and the difference between
V+ and V- should not exceed +44V.
V+
V+
D
S
Vg
V-
V-
Figure 1. Overvoltage Protection Using External Blocking Diodes
_______________________________________________________________________________________
Improved, Quad,
SPST Analog Switches
LOGIC
INPUT
+5V
+15V
VL
V+
t r < 20ns
t f < 20ns
+3V
50%
SWITCH
INPUT
0V
S1
DG411
DG412
DG413
SWITCH OUTPUT
VOUT
D1
RL
300Ω
t OFF
IN1
VOUT
SWITCH
OUTPUT
0V
0.9 x VOUT
0.9 x VOUT
LOGIC
INPUT
t ON
GND
V-
0V
-15V
CL
35pF
REPEAT TEST FOR IN AND S, FOR LOAD
CONDITIONS, SEE Electrical Characteristics.
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL
VOUT = VS
RL + RDS(ON)
LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES
THAT HAVE THE OPPOSITE LOGIC SENSE.
(
)
Figure 2. Switching-Time
+3V
LOGIC
INPUT
50%
S1
0V
SWITCH
OUTPUT 1
(VO1)
VS1 = +10V
VS2 = +10V
0.9 x VOUT1
0V
+5V
+15V
VL
V+
DG413
D1
VOUT1
VOUT2
D2
S2
RL2
IN
SWITCH
OUTPUT 2
(VO2)
0.9 x VOUT2
0V
tD
LOGIC
INPUT
GND
RL1
CL1
CL2
V-15V
tD
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL = 300Ω
CL = 35pF
Figure 3. DG413 Break-Before-Make
ΔVOUT
VOUT
RGEN
+5V
+15V
VL
V+
S
DG411
DG412
DG413
D
VOUT
IN
OFF
IN
ON
ON
OFF
OFF
OFF
Q = (ΔV OUT )(C L )
IN DEPENDS ON SWITCH CONFIGURATION;
INPUT POLARITY DETERMINED BY SENSE OF SWITCH.
V GEN
CL
GND
IN
V-
-15V
VIN = +3V
Figure 4. Charge-Injection
_______________________________________________________________________________________
7
DG411/DG412/DG413
______________________________________________Timing Diagrams/Test Circuits
DG411/DG412/DG413
Improved, Quad,
SPST Analog Switches
_________________________________Timing Diagrams/Test Circuits (continued)
+15V
C
SIGNAL
GENERATOR
+5V
DG411
DG412
DG413
V+
S
VL
0V or
2.4V
IN
ANALYZER
D
C
SIGNAL
GENERATOR 0dBm
0V or 2.4V
V-
V+
VL
S
DG411
DG412
DG413
50Ω
D
IN2
IN1
0V or 2.4V
S
GND
C
RL
+5V
D
ANALYZER
GND
+15V
V-
C
RL
-15V
-15V
Figure 6. Crosstalk
Figure 5. Off-Isolation
C
+15V
+5V
C
DG411
DG412
DG413
V+
S
+5V
+15V
DG411
DG412
DG413
V+
VL
VL
S
CAPACITANCE
METER
IN
0V or
2.4V
CAPACITANCE
METER
GND
V-
C
GND
Figure 7. Channel Off-Capacitance
V-
-15V
-15V
8
0V or
2.4V
D
D
f = 1MHz
IN
f = 1MHz
Figure 8. Channel On-Capacitance
_______________________________________________________________________________________
C
Improved, Quad,
SPST Analog Switches
PART
TEMP RANGE
PIN-PACKAGE
DG411EGE
-40°C to +85°C
16 QFN-EP*
DG411DJ
-40°C to +85°C
16 Plastic DIP
DG411DY
-40°C to +85°C
16 Narrow SO
DG411DK
-40°C to +85°C
16 CERDIP
DG411AK
-55°C to +125°C
16 CERDIP**
DG411MY/PR
-55°C to +125°C
16 SO***
DG411MY/PR-T
-55°C to +125°C
16 SO***
DG412CJ
0°C to +70°C
16 Plastic DIP
DG412CUE
0°C to +70°C
16 TSSOP
DG412EUE
-40°C to +85°C
16 TSSOP
DG412CY
0°C to +70°C
16 Narrow SO
DG412C/D
0°C to +70°C
DG412DJ
-40°C to +85°C
16 Plastic DIP
DG412EGE
-40°C to +85°C
16 QFN-EP*
DG412DY
-40°C to +85°C
16 Narrow SO
DG412DK
-40°C to +85°C
16 CERDIP
DG412AK
-55°C to +125°C
16 CERDIP**
DG412MY/PR
-55°C to +125°C
16 SO***
DG412MY/PR-T
-55°C to +125°C
16 SO***
DG413CJ
0°C to +70°C
Dice†
0°C to +70°C
16 TSSOP
DG413EUE
-40°C to +85°C
16 TSSOP
0°C to +70°C
D1
IN1
IN2
D2
S1
S2
V+ 0.097"
V L (2.46mm)
VGND
S4
S3
D4
IN4
IN3
D3
0.080"
(2.03mm)
16 Plastic DIP
DG413CUE
DG413CY
Chip Topography
16 Narrow SO
DG413C/D
0°C to +70°C
DG413EGE
-40°C to +85°C
16 QFN-EP*
Dice†
DG413DJ
-40°C to +85°C
16 Plastic DIP
DG413DY
-40°C to +85°C
16 Narrow SO
DG413DK
-40°C to +85°C
16 CERDIP
DG413AK
-55°C to +125°C
16 CERDIP**
†Contact factory for dice specifications.
*EP = Exposed pad.
**Contact factory for availability and processing to MIL-STD-883B.
***Contact factory for availability.
_______________________________________________________________________________________
9
DG411/DG412/DG413
Ordering Information (continued)
Improved, Quad,
SPST Analog Switches
DG411/DG412/DG413
Pin Configurations/Functional Diagrams (continued)
TOP VIEW
D1
IN1
IN2
D2
D1
IN1
IN2
D2
D1
IN1
IN2
D2
16
15
14
13
16
15
14
13
16
15
14
13
S1
1
12
S2
S1
1
12
S2
S1
1
V-
2
11
V+
V-
2
11
V+
V-
2
DG411
DG412
S2
11
V+
DG413
GND
3
10
VL
GND
3
10
VL
GND
3
10
VL
S4
4
9
S3
S4
4
9
S3
S4
4
9
S3
5
6
7
8
5
6
7
8
5
6
7
8
D4
IN4
IN3
D3
D4
IN4
IN3
D3
D4
IN4
IN3
D3
QFN
QFN
QFN
*EP = CONNECT EP TO V+.
10
12
______________________________________________________________________________________
Improved, Quad,
SPST Analog Switches
PACKAGE TYPE
PACKAGE CODE
DOCUMENT NO.
16 QFN-EP
G1655-3
21-0091
16 Plastic DIP
P16-1
21-0043
16 TSSOP
U16-2
21-0066
16 CERDIP
J16-3
21-0045
16 Narrow SO
S16-1
21-0041
16 SO
S16-1
21-0041
______________________________________________________________________________________
11
DG411/DG412/DG413
Package Information
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages.
DG411/DG412/DG413
Improved, Quad,
SPST Analog Switches
Revision History
REVISION
NUMBER
REVISION
DATE
6
9/07
Addition of exposed pad information
1, 6, 9, 14, 15
7
9/08
Addition of rugged plastic information
1, 9
DESCRIPTION
PAGES
CHANGED
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2008 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.
工商网监
湘ICP备2023018690号
