MAX4888AETI/V+T

19-0770; Rev 2; 5/09 KIT ATION EVALU E L B AVAILA 5.0Gbps PCI Express Passive Switches Features The MAX4888A/MAX4889A high-speed passive switches route PCI Express® (PCIe) data between two possible destinations. The MAX4888A is a quad single-pole/double-throw (4 x SPDT) switch ideally suited for switching two half lanes of PCIe data between two destinations. The MAX4889A is an octal single-pole/double-throw (8 x SPDT) switch ideal for switching four half lanes of PCIe data between four destinations. The MAX4888A/ MAX4889A feature a single digital control input (SEL) to switch signal paths. The MAX4888A/MAX4889A are fully specified to operate from a single +3.0V to +3.6V power supply††. The MAX4888A is available in a 3.5mm x 5.5mm, 28-pin TQFN package. The MAX4889A is available in a 3.5mm x 9.0mm, 42-pin TQFN package. Both devices operate over the -40°C to +85°C temperature range. ♦ Single +3.0V to +3.6V Power-Supply Voltage ♦ Low Same-Pair Skew of 7ps ♦ Low 120µA (Max) Quiescent Current ♦ Supports PCIe Gen I and Gen || Data Rates ♦ Flow-Through Pin Configuration for Ease of Layout ♦ Industry-Compatible Pinout ♦ Lead-Free Packaging Applications Desktop Computers Servers/Storage Area Networks Laptops Ordering Information/Selector Guide PART TEMP RANGE PIN-PACKAGE CONFIGURATION MAX4888AETI+ -40°C to +85°C 28 TQFN-EP* Two Half Lanes MAX4889AETO+ -40°C to +85°C 42 TQFN-EP* Four Half Lanes +Denotes lead(Pb)-free/RoHS-compliant package. *EP = Exposed paddle. ††Contact factory if operating at +2.5V or +1.8V. Typical Application Circuit appears at end of data sheet. PCI Express is a registered trademark of PCI-SIG Corp. Pin Configurations NO4- NO4+ NO3- NO3+ NC4- NC4+ NC3- NC3+ V+ NO2- NO2+ NO1- NO1+ NC2- 8 9 10 11 12 13 14 15 16 17 GND 7 COM4- 6 COM4+ 5 GND 4 V+ 3 COM3- 2 COM3+ 1 GND 10 SEL 9 V+ 8 18 V+ + COM2- COM1+ 7 GND N.C. 6 N.C. SEL 5 V+ 4 COM2- 3 COM2+ 2 COM1- 1 GND + 19 GND *EP V+ 42 COM2+ 11 V+ V+ *EP V+ 28 20 V+ MAX4889A GND 41 GND 12 GND V+ 40 COM1- MAX4888A GND 27 21 GND GND 39 GND 13 V+ COM1+ 14 GND V+ 26 NC2+ 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 24 23 22 21 20 19 18 17 16 15 GND 25 NC1- NC1+ NO2- NO2+ NO1- NO1+ V+ GND NC2- NC2+ NC1- NC1+ TOP VIEW TQFN TQFN *CONNECT EXPOSED PADDLE TO GROUND. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 1 MAX4888A/MAX4889A General Description MAX4888A/MAX4889A 5.0Gbps PCI Express Passive Switches ABSOLUTE MAXIMUM RATINGS (All voltages referenced to GND, unless otherwise noted.) V+ .............................................................................-0.3V to +4V SEL, COM__, NO__, NC__ (Note 1) .............-0.3V to (V+ + 0.3V) | COM__ - NO__ |, | COM__ - NC__ | (Note 1).................0 to +2V Continuous Current (COM_ to NO__/NC__) .....................±70mA Peak Current (COM__ to NO__/NC__) (pulsed at 1ms, 10% duty cycle)..................................±70mA Continuous Current (SEL).................................................±30mA Peak Current (SEL) (pulsed at 1ms, 10% duty cycle)................................±150mA Continuous Power Dissipation (TA = +70°C) 28-Pin TQFN (derate 20.8mW/°C above +70°C) ....1666.7mW 42-Pin TQFN (derate 35.7mW/°C above +70°C) ....2857.1mW Operating Temperature Range ...........................-40°C to +85°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Junction Temperature ......................................................+150°C Note 1: Signals on SEL, NO__, NC__ or COM__ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum current rating. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V+ = +3.0V to +3.6V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at V+ = +3.3V, TA = +25°C.) (Note 2) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS (V+ - 1.2) V 1.8 V ANALOG SWITCH Analog-Signal Range Voltage Between COM and NO/NC VCOM_, VNO_, VNC_ | VCOM_ VNO_ | , | VCOM_ VNC_ | 0 On-Resistance R ON V+ = +3.0V, ICOM_ = 15mA, VNO_ or VNC_ = 0V, +1.8V On-Resistance Match Between Pairs of Same Channel RON V+ = +3.0V, ICOM_ = 15mA, VNO_ or VNC_ = 0V (Notes 3, 4) 0.1 1
On-Resistance Match Between Channels RON V+ = +3.0V, ICOM_ = 15mA, VNO_ or VNC_ = 0V (Notes 3, 4) 0.6 2
0.06 2

7 On-Resistance Flatness RFLAT(ON) V+ = +3.0V, ICOM_ = 15mA VNO_ or VNC_ = 0V, +1.8V (Notes 4, 5) NO_ or NC_ Off-Leakage Current INO_(OFF) INC_(OFF) V+ = +3.6V, VCOM_ = 0V, +1.8V, VNO_ or VNC_ = +1.8V, 0V -1 +1 μA COM_ On-Leakage Current ICOM_(ON) V+ = +3.6V, VCOM_ = 0V, +1.8V, VNO_ or VNC_ = VCOM_or unconnected -1 +1 μA 2 _______________________________________________________________________________________ 5.0Gbps PCI Express Passive Switches (V+ = +3.0V to +3.6V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at V+ = +3.3V, TA = +25°C.) (Note 2) PARAMETER SYMBOL DYNAMIC Turn-On Time tON Turn-Off Time t OFF Propagation Delay t PD CONDITIONS TYP MAX UNITS VNO_ or VNC_ = +1.0V, RL = 50
, Figure 1 90 250 ns VNO_ or VNC_ = +1.0V, RL = 50
, Figure 1 RS = RL = 50
, unbalanced, Figure 2 10 50 ns Output Skew Between Pairs t SK1 RS = RL = 50
, unbalanced; skew between any two pairs, Figure 2 Output Skew Between Same Pair t SK2 RS = RL = 50
, unbalanced; skew between two lines on same pair, Figure 2 On-Loss GLOS RS = RL = 50
, unbalanced, Figure 3 Crosstalk VCT1 Signaling Data Rate Off-Isolation NO_/NC_ Off-Capacitance COM_ On-Capacitance MIN RS = RL = 50
VISO Signal = 0dBm, RS = RL = 50
, Figure 3 50 ps 10 ps -0.5 500MHz < f < 1.25GHz -1.4 dB -53 dB -32 5.0 f = 10MHz -56 f = 1.25GHz -26 Gbps dB CNO_/NC_(OFF) Figure 4 CCOM_(ON) ps 1MHz < f < 100MHz Crosstalk between f = 50MHz any two pairs, RS = RL = 50
, unbalanced, f = 1.25GHz Figure 3 BR 50 Figure 4 1 pF 2 pF LOGIC INPUT Input-Logic Low VIL Input-Logic High VIH Input-Logic Hysteresis VHYST Input Leakage Current I IN 0.5 1.4 V 100 VSEL = 0V or V+ V mV -1 +1 μA 1.65 3.60 V POWER SUPPLY Power-Supply Range V+ V+ Supply Current I+ VSEL = 0V or V+ Input Leakage Current I IN VSEL = 0V or V+ MAX4888A 60 MAX4889A 120 -1 +1 μA μA ESD PROTECTION COM_+, COM_- Human Body Model ±6 kV Note 2: All units are 100% production tested at TA = +85°C. Limits over the operating temperature range are guaranteed by design and characterization and are not production tested. Note 3: ΔRON = RON(MAX) - RON(MIN). Note 4: Guaranteed by design. Not production tested. Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. _______________________________________________________________________________________ 3 MAX4888A/MAX4889A ELECTRICAL CHARACTERISTICS (continued) Typical Operating Characteristics (TA = +25°C, unless otherwise noted.) ON-RESISTANCE vs. VCOM_ (V+ = +1.8V) 8.0 12 7.5 7.0 6.5 14 8 TA = +85°C 12 6 10 TA = -40°C 4 TA = +25°C 8 6 4 V+ = +3.3V 2 2 5.5 5.0 0 0 -0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 VCOM_ (V) -0.1 ON-RESISTANCE vs. VCOM_ (V+ = +3.3V) 10 0.2 0.3 VCOM_ (V) 0.4 0.5 -0.1 0.6 8 6 4 70 60 V+ = +3.3V 40 V+ = +2.5V 20 10 TA = -40°C 0 0.5 0.7 VCOM_ (V) -15 1.1 1.0 VIH tON/tOFF (ns) 1.3 0.9 0.8 VIL 0.7 10 35 TEMPERATURE (°C) 60 85 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V) NO_ tON MAX4888A/89A toc07 TURN-ON/-OFF TIME vs. SUPPLY VOLTAGE 240 220 200 180 160 NC_ tON NO_ tOFF NC_ tOFF 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V) 4 1.1 0.5 -40 140 120 100 80 60 40 20 0 0.9 0.6 V+ = +1.8V 0 -0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 VCOM_ (V) 0.3 LOGIC THRESHOLD vs. SUPPLY VOLTAGE 50 30 0.1 1.2 LOGIC THRESHOLD (V) TA = +25°C 0.1 80 SUPPLY CURRENT (μA) TA = +85°C 12 0 SUPPLY CURRENT vs. TEMPERATURE (MAX4889A) MAX4888A/89A toc04 14 TA = -40°C MAX4888A/89A toc06 6.0 2 TA = +25°C 10 RON (Ω) RON (Ω) V+ = +2.5V TA = +85°C RON (Ω) 9.0 8.5 14 MAX4888A/89A toc02 V+ = +1.8V MAX4888A/89A toc05 9.5 MAX4888A/89A toc01 10.0 ON-RESISTANCE vs. VCOM_ (V+ = +2.5V) MAX4888A/89A toc03 ON-RESISTANCE vs. VCOM_ RON (Ω) MAX4888A/MAX4889A 5.0Gbps PCI Express Passive Switches _______________________________________________________________________________________ 5.0Gbps PCI Express Passive Switches VCOM_+ VCOM_- VCOM_- EYE DIAGRAM (V+ = +2.5V, f = 2.5GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50Ω)†† MAX4888A/89A toc12 MAX4888A/89A toc11 EYE DIAGRAM (V+ = +1.8V, f = 2.5GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50Ω)†† 50mV/div VCOM_+ 50mV/div VCOM_- *PRBS = PSEUDORANDOM BIT SEQUENCE † = GEN 1, 2.5Gbps; U1 = 400ps *PRBS = PSEUDORANDOM BIT SEQUENCE † = GEN 1, 2.5Gbps; U1 = 400ps *PRBS = PSEUDORANDOM BIT SEQUENCE † = GEN 1, 2.5Gbps; U1 = 400ps VCOM_+ 50ps/div 50ps/div 50ps/div EYE DIAGRAM (V+ = +3.3V, f = 2.5GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50Ω)†† MAX4888A/89A toc12 VCOM_- VCOM_+ 50mV/div 50mV/div 50mV/div MAX4888A/89A toc10 MAX4888A/89A toc09 MAX4888A/89A toc08 VCOM_+ EYE DIAGRAM (V+ = +3.3V, f = 1.25GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50Ω)† EYE DIAGRAM (V+ = +2.5V, f = 1.25GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50Ω)† EYE DIAGRAM (V+ = +1.8V, f = 1.25GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50Ω)† VCOM_+ 50mV/div VCOM_- VCOM_- 25ps/div 25ps/div *PRBS = PSEUDORANDOM BIT SEQUENCE †† = GEN 11, 5.0Gbps; U1 = 200ps *PRBS = PSEUDORANDOM BIT SEQUENCE †† = GEN 11, 5.0Gbps; U1 = 200ps 25ps/div *PRBS = PSEUDORANDOM BIT SEQUENCE †† = GEN 11, 5.0Gbps; U1 = 200ps _______________________________________________________________________________________ 5 MAX4888A/MAX4889A Typical Operating Characteristics (continued) (TA = +25°C, unless otherwise noted.) 5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A Pin Description PIN MAX4888A MAX4889A 1, 10, 12, 14, 1, 4, 10, 14, 17, 20, 25, 27 19, 21, 39, 41 6 NAME GND 2 3, 9 4 5 6 7 9 — 2 3 6 7 SEL N.C. COM1+ COM1COM2+ COM2- 8, 11, 13, 19, 26, 28 5, 8, 13, 18, 20, 30, 40, 42 V+ FUNCTION Ground Digital Control Input No Connection. Not internally connected. Analog Switch 1. Common Positive Terminal. Analog Switch 1. Common Negative Terminal. Analog Switch 2. Common Positive Terminal. Analog Switch 2. Common Negative Terminal. Positive-Supply Voltage Input. Connect V+ to a +3.0V to +3.6V supply voltage. Bypass V+ to GND with a 0.1μF capacitor placed as close to the device as possible (See the Board Layout section). 15 31 NO2- 16 32 NO2+ Analog Switch 2. Normally Open Negative Terminal. Analog Switch 2. Normally Open Positive Terminal. 17 33 NO1- Analog Switch 1. Normally Open Negative Terminal. 18 34 NO1+ Analog Switch 1. Normally Open Positive Terminal. 21 35 NC2- Analog Switch 2. Normally Closed Negative Terminal. 22 36 NC2+ Analog Switch 2. Normally Closed Positive Terminal. 23 37 NC1- Analog Switch 1. Normally Closed Negative Terminal. 24 38 NC1+ Analog Switch 1. Normally Closed Positive Terminal. — 11 COM3+ Analog Switch 3. Common Positive Terminal. — 12 COM3- Analog Switch 3. Common Negative Terminal. — 15 COM4+ Analog Switch 4. Common Positive Terminal. — 16 COM4- Analog Switch 4. Common Negative Terminal. — 22 NO4- Analog Switch 4. Normally Open Negative Terminal. — 23 NO4+ Analog Switch 4. Normally Open Positive Terminal. Analog Switch 3. Normally Open Negative Terminal. — 24 NO3- — 25 NO3+ Analog Switch 3. Normally Open Positive Terminal. — 26 NC4- Analog Switch 4. Normally Closed Negative Terminal. — 27 NC4+ Analog Switch 4. Normally Closed Positive Terminal. — 28 NC3- Analog Switch 3. Normally Closed Negative Terminal. — 29 NC3+ Analog Switch 3. Normally Closed Positive Terminal. — — EP Exposed Paddle. Connect EP to GND. _______________________________________________________________________________________ 5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A +3.3V V+ COM_ NO_ OR NC_ VN_ LOGIC INPUT 50% VIL VOUT RL t OFF CL SEL VOUT GND LOGIC INPUT t r < 5ns t f < 5ns VIH SWITCH OUTPUT 0.9 x V0UT 0.9 x VOUT 0V t ON CL INCLUDES FIXTURE AND STRAY CAPACITANCE. RL VOUT = VN_ RL + RON ( ) VN_ = VNO_ OR VNC_ Figure 1. Switching Time _______________________________________________________________________________________ 7 MAX4888A/MAX4889A Test Circuits/Timing Diagrams 5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A Test Circuits/Timing Diagrams (continued) +3.3V V+ RS IN+ MAX4888A/MAX4889A NO_+ OR NC_+ COM_+ OUT+ RISE-TIME PROPAGATION DELAY = tPLHX OR tPLHY FALL-TIME PROPAGATION DELAY = tPHLX OR tPHLY RL RS IN- NO_- OR NC_- COM_- tSK1 = DIFFERENCE IN PROPAGATION DELAY (RISE-FALL) BETWEEN ANY TWO PAIRS tSK2 = | tPLHX - tPHLY | OR | tPHLX - tPLHY | BETWEEN TWO LINES ON THE SAME PAIR OUTRL SEL tINFALL tINRISE +1.5V 90% VIN+ 50% 90% 50% 10% 0V 10% +1.5V VIN- 50% 50% 0V tOUTRISE tPLHX tOUTFALL tPHLX +1.5V 90% VOUT+ 90% 50% 50% 10% 0V 10% +1.5V 50% VOUT- 50% 0V tPHLY tPLHY Figure 2. Propagation Delay and Output Skew 8 _______________________________________________________________________________________ 5.0Gbps PCI Express Passive Switches +3.3V 0.1μF OFF-ISOLATION = 20log NETWORK ANALYZER 0V OR V+ V+ SEL NC_ 50Ω VIN COM_ V ON-LOSS = 20log OUT VIN 50Ω MAX4888A/MAX4889A VOUT NO_ 50Ω MEAS REF 50Ω VOUT VIN V CROSSTALK = 20log OUT VIN 50Ω GND MEASUREMENTS ARE STANDARDIZED AGAINST SHORTS AT IC TERMINALS. OFF-ISOLATION IS MEASURED BETWEEN COM_ AND "OFF" NO_ OR NC_ TERMINAL ON EACH SWITCH. ON-LOSS IS MEASURED BETWEEN COM_ AND "ON" NO_ OR NC_ TERMINAL ON EACH SWITCH. CROSSTALK IS MEASURED BETWEEN ANY TWO PAIRS. SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED. Figure 3. On-Loss, Off-Isolation, and Crosstalk 0.1μF two sets of eight lanes from a single 16-lane bus. The MAX4888A/MAX4889A feature a single digital control input (SEL) to switch signal paths. +3.3V V+ COM_ The MAX4888A/MAX4889A are fully specified to operate from a single +3.0V to +3.6V power supply††. MAX4888A/MAX4889A SEL CAPACITANCE METER Digital Control Input (SEL) VIL OR VIH NC_ or NO_ GND The MAX4888A/MAX4889A provide a single digital control input (SEL) to select the signal path between the COM__ and NO__/NC__ channels. The truth tables for the MAX4888A/MAX4889A are depicted in the Functional Diagrams/Truth Table section. Drive SEL railto-rail to minimize power consumption. Analog Signal Levels Figure 4. Channel Off-/On-Capacitance Detailed Description The MAX4888A/MAX4889A high-speed passive switches route PCIe data between two possible destinations. The MAX4888A/MAX4889A are ideal for routing PCIe signals to change the system configuration. For example, in a graphics application, the MAX4888A/MAX4889A create The MAX4888A/MAX4889A accept standard PCIe signals to a maximum of V+ - 1.2V. Signals on the COM_+ channels are routed to either the NO_+ or NC_+ channels, and signals on the COM_- channels are routed to either the NO_- or NC_- channels. The MAX4888A/ MAX4889A are bidirectional switches, allowing COM__, NO__, and NC__ to be used as either inputs or outputs. ††Contact factory if operating at +2.5V or +1.8V. _______________________________________________________________________________________ 9 MAX4888A/MAX4889A Test Circuits/Timing Diagrams (continued) 5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A Functional Diagrams/Truth Table V+ V+ MAX4888A MAX4889A COM1+ NC1+ COM1+ NC1+ COM1- NC1- COM1- NC1- NO1+ NO1+ NO1- NO1- COM2+ NC2+ COM2+ NC2+ COM2- NC2- COM2- NC2- SEL NO2+ NO2+ NO2- NO2COM3+ NC3+ COM3- NC3NO3+ GND NO3SEL COM__TO COM__TO NC__ NO__ 0 ON OFF 1 OFF ON COM4+ NC4+ COM4- NC4NO4+ NO4- SEL GND 10 ______________________________________________________________________________________ 5.0Gbps PCI Express Passive Switches PCIe Switching The MAX4888A/MAX4889A primary applications are aimed at reallocating PCIe lanes (see Figure 5). For example, in graphics applications, several manufacturers have found that it is possible to improve performance by a factor of nearly two by splitting a single 16-lane PCIe bus into two 8-lane buses. Two of the more prominent examples are SLI™ (Scaled Link Interface) and CrossFire™. The MAX4889A permits a computer motherboard to operate properly with a single 16-lane graphics card, and can later be updated to dual cards. The same motherboard can be used with dual cards where the user sets a jumper or a bit through software to switch between single- or dual-card operation. Common mode below 1V operation requirement. Board Layout High-speed switches require proper layout and design procedures for optimum performance. Keep designcontrolled impedance PCB traces as short as possible or follow impedance layouts per the PCIe specification. Ensure that power-supply bypass capacitors are placed as close to the device as possible. Multiple bypass capacitors are recommended. Connect all grounds and the exposed pad to large ground planes. Common mode below 1V operation requirement. ESD Protection As with all Maxim devices, ESD-protection structures are incorporated on all pins to protect against electrostatic discharges encountered during handling and assembly. The COM_+ and COM_- lines have extra protection against static electricity. Maxim’s engineers have developed state-of-the-art structures to protect these pins against ESD of ±6kV without damage. The ESD structures withstand ±6kV of ESD in all states: normal operation, state output mode, and powered down. Human Body Model The MAX4889A COM_+ and COM_- pins are characterized for ±6kV ESD protection using the Human Body Model (MIL-STD-883, Method 3015). Figure 6 shows the Human Body Model and Figure 7 shows the current waveform it generates when discharged into low impedance. This model consists of a 100pF capacitor charged to the ESD voltage of interest, which is then discharged into the device through a resistor. RC 1MΩ CHARGE-CURRENTLIMIT RESISTOR HIGHVOLTAGE DC SOURCE Cs 100pF RD 1500Ω DISCHARGE RESISTANCE DEVICE UNDER TEST STORAGE CAPACITOR DATA DIRECTION ONE LANE MAX4888A MAX4889A Figure 6. Human Body ESD Test Model IP 100% 90% DATA IS ROUTED TO EITHER BOARD A OR B NOTE: ONLY ONE LANE IS SHOWN FOR CLARITY Ir PEAK-TO-PEAK RINGING (NOT DRAWN TO SCALE) AMPERES 36.8% 10% 0 0 A tRL B Figure 5. The MAX4888A/MAX4889A Used as a Single-Lane Switch TIME tDL CURRENT WAVEFORM Figure 7. Human Body Model Current Waveform Chip Information CrossFire is a trademark of ATI Technologies, Inc. SLI is a trademark of NVIDIA Corporation. PROCESS: CMOS ______________________________________________________________________________________ 11 MAX4888A/MAX4889A Applications Information 5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A Typical Application Circuit PCIe GRAPHICS INTERFACE GRAPHICS CARD 1 PCIe BUS NC1+ COM1+ LANE 0 TX LANE 1 TX COM1- NC1- COM2+ NC2+ COM2- MAX4889A LANE 3 TX NC2NC3+ COM3+ LANE 2 TX GRAPHICS CARD 2 COM3- NC3- COM4+ NC4+ NC4- COM4- NO1+ NO1NO2+ NO2NO3+ NO3NO4+ SEL NO4- CHANNEL SELECT COM1+ LANE 0 RX LANE 1 RX NC1+ COM1- NC1- COM2+ NC2+ COM2- MAX4889A COM3+ LANE 2 RX LANE 3 RX NC2NC3+ COM3- NC3- COM4+ NC4+ COM4- NC4NO1+ NO1NO2+ NO2NO3+ NO3NO4+ SEL NO4- CHANNEL SELECT 12 ______________________________________________________________________________________ 5.0Gbps PCI Express Passive Switches PACKAGE TYPE PACKAGE CODE DOCUMENT NO. 28 TQFN-EP T283555-1 21-0184 42 TQFN-EP T423590M-1 21-0181 ______________________________________________________________________________________ 13 MAX4888A/MAX4889A Package Information For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. MAX4888A/MAX4889A 5.0Gbps PCI Express Passive Switches Revision History REVISION NUMBER REVISION DATE 0 4/07 Initial release 2 5/09 Updated voltage range, style edits. DESCRIPTION PAGES CHANGED — 1, 2, 3, 5–9, 13, 14 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 14 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 2009 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products. Inc.