B32669C3605J

Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: B32669 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product see following page Date of Withdrawal 2014-04-11 Deadline Last Orders 2014-07-15 Last Shipments 2014-10-15 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.  EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Affected products (Ordering code) B32669B6105J000 B32669B6105K000 B32669B6155J000 B32669B6155K000 B32669B6205K000 B32669B6255K000 B32669B6305J150 B32669B6305K000 B32669B6405K000 B32669B6505K000 B32669B6605K000 B32669C1156K000 B32669C3106J000 B32669C3205J000 B32669C3205K000 B32669C3225K000 B32669C3255J000 B32669C3255K000 B32669C3305K000 B32669C3405K000 B32669C3605K000 B32669C3805K000 B32669S1104K500 B32669S3105K500 B32669S3105K501 B32669S3106K500 B32669S3126K550 B32669S3156K550 B32669S3225K500 B32669S3405K506 B32669S3505K550 B32669S3564K600 B32669S3605K500 B32669S3684K500 B32669S3684K600 Metallized polypropylene film capacitors (MKP) B32669 AC applications (wound) Not suitable for "across the line" applications! Dimensional drawing Typical applications Energy storage Filtering Climatic Max. operating temperature: 85 °C Climatic category (IEC 60068-1): 40/085/21 Construction Dielectric: polypropylene (PP) Cylindrical winding Insulating sleeve Face ends sealed with epoxy resin Features Good self-healing properties RoHS-compatible Terminals Axial leads, lead-free tinned Axial leads, insulated, tinned copper wires gathered together by a tin cover (fray), AWG 22 Dimensions in mm When bending leads, take care to leave a clearance of 1 mm to the capacitor body. Marking Manufacturer Series number rated capacitance (coded), capacitance tolerance (code letter), rated AC voltage, frequency, date code Delivery mode Bulk (untaped) Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 15 B32669 AC applications (wound) Overview of available types Version Tinned leads Page 4 VRMS (V AC) 250 Insulated leads 5 400 250 CR (µF) 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 15 400 B32669 AC applications (wound) Ordering codes and packing units (tinned leads) VRMS CR V AC 250 µF 1.0 1.5 2.0 2.5 3.0 4.0 6.0 8.0 10 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 400 Max. dimensions d×l mm 9.0 × 32.0 11.0 × 32.0 12.5 × 32.0 14.0 × 32.0 15.5 × 32.0 15.0 × 47.0 17.0 × 47.0 19.5 × 47.0 21.5 × 47.0 13.0 × 32.0 15.0 × 32.0 19.0 × 32.0 21.0 × 32.0 18.0 × 47.0 21.0 × 47.0 22.0 × 47.0 25.5 × 47.0 Ordering code (composition see below) B32669C3105+000 B32669C3155+000 B32669C3205+000 B32669C3255+000 B32669C3305+000 B32669C3405+000 B32669C3605+000 B32669C3805+000 B32669C3106+000 B32669B6105+000 B32669B6155+000 B32669B6205+000 B32669B6255+000 B32669B6305+000 B32669B6405+000 B32669B6505+000 B32669B6605+000 Untaped pcs./MOQ 1000 1000 800 800 600 600 400 200 200 1000 800 800 600 600 400 600 200 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 15 B32669 AC applications (wound) Ordering codes and packing units (insulated leads) VRMS CR V AC 250 µF 1.0 1.5 2.0 2.5 3.0 4.0 6.0 8.0 10 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 400 Max. dimensions d×l mm 9.0 × 32.0 11.0 × 32.0 12.5 × 32.0 14.0 × 32.0 15.5 × 32.0 15.0 × 47.0 17.0 × 47.0 19.5 × 47.0 21.5 × 47.0 13.0 × 32.0 15.0 × 32.0 19.0 × 32.0 21.0 × 32.0 18.0 × 47.0 21.0 × 47.0 22.0 × 47.0 25.5 × 47.0 Ordering code (composition see below) B32669S3105+*** B32669S3155+*** B32669S3205+*** B32669S3255+*** B32669S3305+*** B32669S3405+*** B32669S3605+*** B32669S3805+*** B32669S3106+*** B32669S6105+*** B32669S6155+*** B32669S6205+*** B32669S6255+*** B32669S6305+*** B32669S6405+*** B32669S6505+*** B32669S6605+*** Untaped pcs./MOQ 1000 1000 1000 1000 800 800 600 600 600 1000 1000 1000 600 600 600 600 600 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. *** = Code number for lead version and length: 504 = Insulated leads (lead length 160 mm) 508 = Insulated leads (lead length 65 mm) Page 5 of 15 B32669 AC applications (wound) Technical data Operating temperature range Dissipation factor tan δ at 20 °C (upper limit values) Time constant τ = CR  Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage AC test voltage Damp heat test Limit values after damp heat test Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR 2  10-3 at 1 kHz 2500 s VR = 250 V AC: 430 V DC, 1 s VR = 400 V AC: 700 V DC, 1 s VR = 250 V AC: 440 V AC, 1 s VR = 400 V AC: 700 V AC, 1 s 21 days/40 °C/93% relative humidity Capacitance change ∆C/C Dissipation factor change ∆ tan δ Time constant τ = CR  Rins Pulse handling capability (rate of voltage rise Vpp/τ) +85 °C +85 °C 40 °C +85 °C ≤ 3% ≤ 0.5  10-3 (at 1 kHz) ≤ 1.0  10-3 (at 10 kHz) ≥ 50% of minimum as-delivered values ≤ 10 V/µs Permissible AC voltage VRMS versus frequency f Values can be obtained on request. In specific cases please provide a scaled voltage/ time graph and state operating conditions. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 15 B32669 AC applications (wound) Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Wetting of wire surface by new solder ≥90%, free-flowing solder 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 15 10 ±1 s 5 ±1 s