cpi | 3 cpx5000a7 cpi | 4cW50,000J
3cpx5000a7
The 3CPX5000A7 high-mu triode is designed for use as a cathode driven Class AB pulsed power amplifier and as a switch tube in cathode or grid driven service. The tube does not require a socket as it is designed to bolt directly to the chassis be means of the grid flange. Cathode and heater connections are made by bolting directly to the amplifier circuitry. These features reduce equipment cost and complexity.
chaRacteRistics
Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 5,000 Watts --25 Watts 110 MHz 200 Oxide Coated 15 Volts 14 Amps Grounded Grid 95 pf 35 pf 0.5 pf ----- pf --- pf --- pf Forced Air Direct Chassis Mount --SK-306 --8.25 in; 20.96 cm 4.94 in; 12.55 cm 9.5 lb; 4.3 kg
type of service
MaxiMuM Ratings
plate Voltage (Volts) 6,500 12,000 plate current (amps) 67 67
ypical OpeRatiOn t
plate current (amps) 14.9 67.5 Drive Output power power (Watts) (kiloWatts) 6,500 --- 60.0 ---
class of Operation
aB ---
plate screen Voltage Voltage (Volts) (Volts) 6,500 12,000 --- ---
cathode driven RF linear amplifier, pulsed switch tube or pulse modulator
The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1 (800) 414-8823. fax : ( 650) 592-9988 | email : powergrid@cpii.com
很抱歉,暂时无法提供与“3CPX5000A7”相匹配的价格&库存,您可以联系我们找货
免费人工找货