PD - 97689A
AUTOMOTIVE GRADE
AUIRFR2407
HEXFET® Power MOSFET
Features
l
l
●
l
l
l
l
l
l
Advanced Planar Technology
Low On-Resistance
Dynamic dV/dT Rating
175°C Operating Temperature
Fast Switching
Fully Avalanche Rated
Repetitive Avalanche Allowed
up to Tjmax
Lead-Free, RoHS Compliant
Automotive Qualified*
V(BR)DSS
D
75V
RDS(on) typ.
max
ID (Silicon Limited)
G
S
21.8mΩ
26mΩ
42A
D
Description
S
Specifically designed for Automotive applications,
this Stripe Planar design of HEXFET® Power
MOSFETs utilizes the latest processing techniques
to achieve low on-resistance per silicon area. This
benefit combined with the fast switching speed and
ruggedized device design that HEXFET power
MOSFETs are well known for, provides the designer
with an extremely efficient and reliable device for use
in Automotive and a wide variety of other applications.
G
D-Pak
AUIRFR2407
G
D
S
Gate
Drain
Source
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These
are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in
the specifications is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions.
Ambient temperature (T A) is 25°C, unless otherwise specified.
Max.
Parameter
Units
ID @ TC = 25°C Continuous Drain Current, VGS @ 10V
42
ID @ TC = 100°C Continuous Drain Current, VGS @ 10V
Pulsed Drain Current
c
29
170
PD @TC = 25°C Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
VGS
110
0.71
± 20
W
W/°C
V
mJ
IDM
d
A
EAS
Single Pulse Avalanche Energy (Thermally Limited)
130
IAR
Avalanche Current
25
A
EAR
dv/dt
Repetitive Avalanche Energy
Peak Diode Recovery dv/dt
Operating Junction and
11
5.0
-55 to + 175
mJ
V/ns
TJ
TSTG
c
c
e
Storage Temperature Range
Soldering Temperature, for 10 seconds (1.6mm from case )
°C
300
Thermal Resistance
j
Parameter
Typ.
Max.
–––
1.4
RθJC
Junction-to-Case
RθJA
Junction-to-Ambient (PCB Mount)
–––
50
RθJA
Junction-to-Ambient
–––
110
i
Units
°C/W
HEXFET® is a registered trademark of International Rectifier.
*Qualification standards can be found at http://www.irf.com/
www.irf.com
1
08/30/11
AUIRFR2407
Static Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
V(BR)DSS
ΔV(BR)DSS/ΔTJ
RDS(on)
VGS(th)
gfs
IDSS
IGSS
Min. Typ. Max. Units
Drain-to-Source Breakdown Voltage
Breakdown Voltage Temp. Coefficient
Static Drain-to-Source On-Resistance
Gate Threshold Voltage
Forward Transconductance
Drain-to-Source Leakage Current
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
75
–––
–––
2.0
27
–––
–––
–––
–––
–––
0.078
21.8
–––
–––
–––
–––
–––
–––
–––
–––
26.0
4.0
–––
20
250
200
-200
Conditions
V VGS = 0V, ID = 250μA
V/°C Reference to 25°C, ID = 1mA
mΩ VGS = 10V, ID = 25A
V VDS = VGS, ID = 250μA
S VDS = 25V, ID = 25A
μA VDS = 75V, VGS = 0V
VDS = 60V, VGS = 0V, TJ = 150°C
nA VGS = 20V
VGS = -20V
f
f
Dynamic Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
Min. Typ. Max. Units
Conditions
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
LD
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Internal Drain Inductance
–––
–––
–––
–––
–––
–––
–––
–––
74
13
22
16
90
65
66
4.5
110
19
34
–––
–––
–––
–––
–––
LS
Internal Source Inductance
–––
7.5
–––
6mm (0.25in.)
from package
Ciss
Coss
Crss
Coss
Coss
Coss eff.
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Output Capacitance
Output Capacitance
Effective Output Capacitance
–––
–––
–––
–––
–––
–––
2400
340
77
15700
220
220
–––
–––
–––
–––
–––
–––
S
and center of die contact
VGS = 0V
VDS = 25V
ƒ = 1.0MHz, See Fig. 5
VGS = 0V, VDS = 1.0V, ƒ = 1.0MHz
VGS = 0V, VDS = 60V, ƒ = 1.0MHz
VGS = 0V, VDS = 0V to 60V
nC
ns
nH
g
pF
ID = 25A
VDS = 60V
VGS = 10V
VDD = 38V
ID = 25A
RG = 6.8Ω
VGS = 10V
Between lead,
f
f
D
G
Diode Characteristics
Parameter
Min. Typ. Max. Units
IS
Continuous Source Current
–––
–––
42
ISM
(Body Diode)
Pulsed Source Current
–––
–––
170
VSD
trr
Qrr
ton
(Body Diode)
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
–––
–––
–––
–––
100
400
1.3
150
600
c
Notes:
Repetitive rating; pulse width limited by
max. junction temperature.
Starting TJ = 25°C, L = 0.42mH
RG = 25Ω, IAS = 25A.
ISD ≤ 25A, di/dt ≤ 290A/μs, VDD ≤ V(BR)DSS,
TJ ≤ 175°C.
Pulse width ≤ 300μs; duty cycle ≤ 2%.
2
Conditions
MOSFET symbol
A
V
ns
nC
showing the
integral reverse
D
G
p-n junction diode.
TJ = 25°C, IS = 25A, VGS = 0V
TJ = 25°C, IF = 25A
di/dt = 100A/μs
S
f
f
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
Coss eff. is a fixed capacitance that gives the same charging time
as Coss while VDS is rising from 0 to 80% VDSS .
When mounted on 1" square PCB (FR-4 or G-10 Material) .
For recommended footprint and soldering techniques refer to
application note #AN-994.
Rθ is measured at T J of approximately 90°C.
www.irf.com
AUIRFR2407
Qualification Information†
Automotive
(per AEC-Q101)
Qualification Level
Moisture Sensitivity Level
Machine Model
ESD
Human Body Model
Charged Device
Model
RoHS Compliant
††
Comments: This part number(s) passed Automotive qualification.
IR’s Industrial and Consumer qualification level is granted by
extension of the higher Automotive level.
D-Pak
MSL1
Class M4 (+/- 500V) †††
AEC-Q101-002
Class H1C (+/- 2000V) †††
AEC-Q101-001
Class C5 (+/- 2000V) †††
AEC-Q101-005
Yes
Qualification standards can be found at International Rectifiers web site: http//www.irf.com/
Exceptions (if any) to AEC-Q101 requirements are noted in the qualification report.
Highest passing voltage.
www.irf.com
3
AUIRFR2407
4
www.irf.com
AUIRFR2407
www.irf.com
5
AUIRFR2407
50
ID, Drain Current (A)
40
30
20
10
0
25
50
75
100
125
150
175
TC , Case Temperature (°C)
Fig 9. Maximum Drain Current Vs.
Case Temperature
6
www.irf.com
AUIRFR2407
www.irf.com
7
AUIRFR2407
8
www.irf.com
AUIRFR2407
D-Pak (TO-252AA) Package Outline
Dimensions are shown in millimeters (inches)
D-Pak Part Marking Information
Part Number
AUFR2407
YWWA
IR Logo
XX
or
Date Code
Y= Year
WW= Work Week
A= Automotive, LeadFree
XX
Lot Code
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
www.irf.com
9
AUIRFR2407
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
TRR
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
FEED DIRECTION
TRL
16.3 ( .641 )
15.7 ( .619 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
13 INCH
16 mm
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
10
www.irf.com
AUIRFR2407
Ordering Information
Base part
number
Package Type
AUIRFR2407
Dpak
www.irf.com
Standard Pack
Form
Tube
Tape and Reel
Tape and Reel Left
Tape and Reel Right
Complete Part Number
Quantity
75
2000
3000
3000
AUIRFR2407
AUIRFR2407TR
AUIRFR2407TRL
AUIRFR2407TRR
11
AUIRFR2407
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its
subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and
other changes to its products and services at any time and to discontinue any product or services without
notice. Part numbers designated with the AU prefix follow automotive industry and / or customer specific
requirements with regards to product discontinuance and process change notification. All products are sold
subject to IRs terms and conditions of sale supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with IRs standard warranty. Testing and other quality control techniques are used to the extent
IR deems necessary to support this warranty. Except where mandated by government requirements, testing
of all parameters of each product is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible
for their products and applications using IR components. To minimize the risks with customer products and
applications, customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible
or liable for such altered documentation. Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for
that product or service voids all express and any implied warranties for the associated IR product or service
and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical
implant into the body, or in other applications intended to support or sustain life, or in any other application
in which the failure of the IR product could create a situation where personal injury or death may occur. Should
Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall
indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized
use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of
Defense, are designed and manufactured to meet DLA military specifications required by certain military,
aerospace or other applications. Buyers acknowledge and agree that any use of IR products not certified by
DLA as military-grade, in applications requiring military grade products, is solely at the Buyers own risk and
that they are solely responsible for compliance with all legal and regulatory requirements in connection with
such use.
IR products are neither designed nor intended for use in automotive applications or environments unless
the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part
number including the designation AU. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, IR will not be responsible for any failure to meet such requirements.
For technical support, please contact IRs Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
12
www.irf.com