DDB6U50N16W1RPBPSA1

DDB6U50N16W1RP EasyBRIDGE module Preliminary datasheet EasyBRIDGE module with chopper configuration and pre-applied Thermal Interface Material Features • Electrical features - VCES = 1200 V - IC nom = 50 A / ICRM = 100 A - TRENCHSTOPTM IGBT7 • Mechanical features - Al2O3 substrate with low thermal resistance - Compact design - Solder contact technology - Pre-applied Thermal Interface Material - Rugged mounting due to integrated mounting clamps Potential applications • • • • Auxiliary inverters Air conditioning Motor drives Servo drives Product validation • Qualified for industrial applications according to the relevant tests of IEC 60747, 60749 and 60068 Description Datasheet www.infineon.com Please read the Important Notice and Warnings at the end of this document 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module Table of contents Table of contents Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 IGBT-Chopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Diode, Chopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Diode, Rectifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Characteristics diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 7 Package outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 8 Module label code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Datasheet 2 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 1 Package 1 Package Table 1 Insulation coordination Parameter Symbol Note or test condition Isolation test voltage VISOL Internal Isolation RMS, f = 50 Hz, t = 1 min Values Unit 2.5 kV basic insulation (class 1, IEC 61140) Al2O3 Creepage distance dCreep terminal to heatsink 11.5 mm Creepage distance dCreep terminal to terminal 6.3 mm Clearance dClear terminal to heatsink 10.0 mm Clearance dClear terminal to terminal 5.0 mm Comparative tracking index CTI RTI Elec. RTI Table 2 > 200 housing 140 °C Values Unit Characteristic values Parameter Symbol Note or test condition Min. Stray inductance module LsCE Typ. Max. 30 nH Module lead resistance, terminals - chip RAA'+CC' TH=25°C, per switch 4 mΩ Module lead resistance, terminals - chip RCC'+EE' TH=25°C, per switch 6 mΩ Storage temperature Maximum baseplate operation temperature Tstg TBPmax Mounting force per clamp F Weight G Note: 2 Table 3 -40 20 °C 125 °C 50 N 24 g Values Unit Tvj = 25 °C 1200 V TH = 85 °C 50 A 100 A The current under continuous operation is limited to 30A rms per connector pin. Storage and shipment of modules with TIM => see AN 2012-07 IGBT-Chopper Maximum rated values Parameter Symbol Note or test condition Collector-emitter voltage VCES Continous DC collector current ICDC Tvj max = 175 °C Repetitive peak collector current ICRM tP = 1 ms Datasheet 125 3 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 2 IGBT-Chopper Table 3 Maximum rated values (continued) Parameter Symbol Note or test condition Gate-emitter peak voltage Table 4 VGES Values Unit ±20 V Values Unit Characteristic values Parameter Symbol Note or test condition Min. Collector-emitter saturation voltage Gate threshold voltage Gate charge VCE sat VGEth QG IC = 50 A, VGE = 15 V Typ. Max. Tvj = 25 °C 1.50 TBD V Tvj = 125 °C 1.64 Tvj = 175 °C 1.72 6.45 V IC = 1.28 mA, VCE = VGE, Tvj = 25 °C VGE = ±15 V, VCE = 600 V 5.15 5.80 0.92 µC 0 Ω Internal gate resistor RGint Tvj = 25 °C Input capacitance Cies f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V 11.1 nF Reverse transfer capacitance Cres f = 100 kHz, Tvj = 25 °C, VCE = 25 V, VGE = 0 V 0.039 nF Collector-emitter cut-off current ICES VCE = 1200 V, VGE = 0 V Gate-emitter leakage current IGES VCE = 0 V, VGE = 20 V, Tvj = 25 °C Turn-on delay time (inductive load) tdon IC = 50 A, VCE = 600 V, VGE = ±15 V, RGon = 5.1 Ω Rise time (inductive load) Turn-off delay time (inductive load) Fall time (inductive load) Turn-on energy loss per pulse Turn-off energy loss per pulse Datasheet tr tdoff tf Eon Eoff IC = 50 A, VCE = 600 V, VGE = ±15 V, RGon = 5.1 Ω IC = 50 A, VCE = 600 V, VGE = ±15 V, RGoff = 5.1 Ω IC = 50 A, VCE = 600 V, VGE = ±15 V, RGoff = 5.1 Ω IC = 50 A, VCE = 600 V, Lσ = 35 nH, VGE = ±15 V, RGon = 5.1 Ω, di/dt = 850 A/µs (Tvj = 175 °C) IC = 50 A, VCE = 600 V, Lσ = 35 nH, VGE = ±15 V, RGoff = 5.1 Ω, dv/dt = 2900 V/µs (Tvj = 175 °C) 4 Tvj = 25 °C Tvj = 25 °C 0.042 Tvj = 125 °C 0.045 Tvj = 175 °C 0.046 Tvj = 25 °C 0.036 Tvj = 125 °C 0.040 Tvj = 175 °C 0.043 Tvj = 25 °C 0.270 Tvj = 125 °C 0.350 Tvj = 175 °C 0.370 Tvj = 25 °C 0.110 Tvj = 125 °C 0.200 Tvj = 175 °C 0.270 Tvj = 25 °C 4.47 Tvj = 125 °C 5.2 Tvj = 175 °C 5.67 Tvj = 25 °C 3.36 Tvj = 125 °C 5.25 Tvj = 175 °C 6.45 0.0062 mA 100 nA µs µs µs µs mJ mJ 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 3 Diode, Chopper Table 4 Characteristic values (continued) Parameter Symbol Note or test condition Values Min. SC data ISC Thermal resistance, junction to heatsink RthJH Temperature under switching conditions Tvj op Note: 3 VGE ≤ 15 V, VCC = 800 V, VCEmax=VCES-LsCE*di/dt tP ≤ 8 µs, Tvj = 150 °C 190 tP ≤ 7 µs, Tvj = 175 °C 180 per IGBT, Valid with IFX pre-applied Thermal Interface Material -40 Max. A 0.840 K/W 175 °C Tvj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN 2018-14. Diode, Chopper Table 5 Maximum rated values Parameter Symbol Note or test condition Repetitive peak reverse voltage VRRM Continous DC forward current IF Repetitive peak forward current I2t - value Table 6 IFRM I2t Values Unit 1200 V 25 A 50 A Tvj = 125 °C 72.5 A²s Tvj = 175 °C 63 Tvj = 25 °C tP = 1 ms VR = 0 V, tP = 10 ms Characteristic values Parameter Symbol Note or test condition Values Min. Forward voltage Peak reverse recovery current Datasheet Typ. Unit VF IRM IF = 25 A, VGE = 0 V IF = 25 A, VR = 600 V, VGE = -15 V, -diF/dt = 960 A/µs (Tvj = 175 °C) 5 Typ. Tvj = 25 °C 1.83 Tvj = 125 °C 1.70 Tvj = 175 °C 1.63 Tvj = 25 °C 21.6 Tvj = 125 °C 25.3 Tvj = 175 °C 27.6 Unit Max. V A 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 4 Diode, Rectifier Table 6 Characteristic values (continued) Parameter Symbol Note or test condition Values Min. Recovered charge Qr Reverse recovery energy Erec Thermal resistance, junction to heatsink RthJH Temperature under switching conditions Tvj op Note: 4 Typ. IF = 25 A, VR = 600 V, VGE = -15 V, -diF/dt = 960 A/µs (Tvj = 175 °C) Tvj = 25 °C 1.89 Tvj = 125 °C 3.53 Tvj = 175 °C 4.62 IF = 25 A, VR = 600 V, VGE = -15 V, -diF/dt = 960 A/µs (Tvj = 175 °C) Tvj = 25 °C 0.62 Tvj = 125 °C 1.3 Tvj = 175 °C 1.74 per diode, Valid with IFX pre-applied Thermal Interface Material -40 Unit Max. µC mJ 1.90 K/W 175 °C Tvj op > 150°C is allowed for operation at overload conditions. For detailed specifications, please refer to AN 2018-14. Diode, Rectifier Table 7 Maximum rated values Parameter Symbol Note or test condition Values Unit Repetitive peak reverse voltage VRRM Tvj = 25 °C 1600 V Maximum RMS forward current per chip IFRMSM TH = 100 °C 50 A Maximum RMS current at rectifier output IRMSM TH = 100 °C 85 A IFSM tP = 10 ms Tvj = 25 °C 500 A Tvj = 150 °C 400 Tvj = 25 °C 1250 Tvj = 150 °C 800 Surge forward current I2t - value Table 8 I2t tP = 10 ms Characteristic values Parameter Symbol Note or test condition Values Min. Forward voltage VF IF = 50 A Reverse current Ir Tvj = 150 °C, VR = 1600 V Thermal resistance, junction to heatsink Datasheet A²s RthJH Tvj = 150 °C per diode, Valid with IFX pre-applied Thermal Interface Material 6 Typ. Unit Max. 0.96 V 1 mA 1.11 K/W 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 4 Diode, Rectifier Table 8 Characteristic values (continued) Parameter Symbol Note or test condition Values Min. Temperature under switching conditions Datasheet Tvj, op -40 7 Typ. Unit Max. 150 °C 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 5 Characteristics diagrams 5 Characteristics diagrams output characteristic (typical), IGBT-Chopper IC = f(VCE) VGE = 15 V output characteristic (typical), IGBT-Chopper IC = f(VCE) Tvj = 175 °C 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 transfer characteristic (typical), IGBT-Chopper IC = f(VGE) VCE = 20 V 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 transient thermal impedance , IGBT-Chopper Zth = f(t) 10 100 90 80 70 1 60 50 40 0.1 30 20 10 0 5 Datasheet 6 7 8 9 10 11 12 0.01 0.001 13 8 0.01 0.1 1 10 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 5 Characteristics diagrams reverse bias safe operating area (RBSOA), IGBTChopper IC = f(VCE) RGoff = 5.1 Ω, VGE = ±15 V, Tvj = 175 °C forward characteristic of (typical), Diode, Chopper IF = f(VF) 120 50 110 45 100 40 90 35 80 70 30 60 25 50 20 40 15 30 10 20 5 10 0 0 0 200 400 600 800 1000 1200 1400 0.0 transient thermal impedance , Diode, Chopper Zth = f(t) 0.5 1.0 1.5 2.0 2.5 forward characteristic of (typical), Diode, Rectifier IF = f(VF) 10 100 90 80 70 1 60 50 40 0.1 30 20 10 0.01 0.001 Datasheet 0 0.01 0.1 1 0.0 10 9 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 5 Characteristics diagrams transient thermal impedance , Diode, Rectifier Zth = f(t) 10 1 0.1 0.01 0.001 Datasheet 0.01 0.1 1 10 10 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 6 Circuit diagram 6 Circuit diagram Figure 2 Datasheet 11 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 7 Package outlines 7 Package outlines Infineon Figure 3 Datasheet 12 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module 8 Module label code 8 Module label code Module label code Code format Data Matrix Barcode Code128 Encoding ASCII text Code Set A Symbol size 16x16 23 digits Standard IEC24720 and IEC16022 IEC8859-1 Code content Content Module serial number Module material number Production order number Date code (production year) Date code (production week) Digit 1–5 6 - 11 12 - 19 20 – 21 22 – 23 Example 71549 142846 55054991 15 30 Example 71549142846550549911530 71549142846550549911530 Figure 4 2 Datasheet 13 0.10 2021-07-28 DDB6U50N16W1RP EasyBRIDGE module Revision history Revision history Document revision Date of release V1.0 2020-06-27 0.10 2021-07-28 Datasheet Description of changes Preliminary datasheet 14 0.10 2021-07-28 Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2021-07-28 Published by Infineon Technologies AG 81726 Munich, Germany © 2021 Infineon Technologies AG All Rights Reserved. Do you have a question about any aspect of this document? Email: erratum@infineon.com Document reference IFX-AAJ547-002 IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. Please note that this product is not qualified according to the AEC Q100 or AEC Q101 documents of the Automotive Electronics Council. WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.