EAPL3527OA1

SMD  TOP View LEDs EAPL3527OA1 PRELIMINARY Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free ․The product itself will remain within RoHS compliant version. Description This series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications • Automotive: backlighting in dashboard and switch. • Telecommunication: indicator and backlighting in telephone and fax. • Flat backlight for LCD, switch and symbol. • Light pipe application. • General use. 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  TOP View LEDs EAPL3527OA1 Device Selection Guide Chip Materials AlGaInP Emitted Color Resin Color Reddish Orange Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA IFP 60 mA Power Dissipation Pd 60 mW Junction Temperature Tj 115 ℃ Operating Temperature Topr -40 ~ +85 ℃ Tstg -40 ~ +90 ℃ Rth J-A 500 K/W Rth J-S 300 K/W ESD ESDHBM 2000 V (Classification acc. AEC Q101) ESDMM 200 V Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Storage Temperature Thermal Resistance 2 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527OA1 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 180 ----- 360 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 621 ----- nm IF=20mA Dominant Wavelength λd 605.5 ---- 621.5 nm IF=20mA Spectrum Radiation Bandwidth Δλ ----- 20 ----- nm IF=20mA Forward Voltage VF 1.7 ---- 2.4 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527OA1 Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition S1 S2 T1 180 225 285 225 285 360 mcd IF =20mA Note: Tolerance of Luminous Intensity: ±11% Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition E1 E2 E3 E4 605.5 609.5 613.5 617.5 609.5 613.5 617.5 621.5 nm IF =20mA Note: Tolerance of Dominant Wavelength: ±1nm 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527OA1 Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Spectrum Distribution Ta=25¢X C 50 Forward Current IF (mA) Relative Luminous Intensity (%) 100 75 50 25 0 500 40 30 20 10 0 600 650 550 Wavelength £f(nm) 1.6 700 1000 100 10 2.2 2.4 2.6 1000 f=1KHz Duty=1/10 100 10 1 0 10 0 20 40 60 80 100 Ambient Temperature Ta (¢X C) 2 1 10 10 Forward Current I F (mA) 3 10 Radiation Diagram Ta=25¢X C 0¢X 10¢X 20¢X 30¢X Forward Current Derating Curve 50 Forward Current I F (mA) 2.0 Relative Luminous Intensity vs. Forward Current Ta=25¢X C Relative Luminous Intensity (%) Relative Luminous Intensity (%) 1.8 Forward Voltage V (V) F Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25¢X C 40 30 20 10 0 0 40¢X 1.0 20 40 60 80 100 0.9 50¢X 0.8 60¢X 0.7 70¢X 80¢X 90¢X 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (¢X C) 5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527OA1 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527OA1 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527OA1 Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Over-current-proof 1.1 Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 260¢X C Max. 10sec. Max. Above255¢X C 30sec.Max. 3¢X C/sec.Max. 6¢X C/sec.Max. Pre-heating Above 217¢X C 60~150sec. 150~200¢X C 60~120sec. 2. Storage 2.1 Moisture proof bag should only be opened immediately prior to usage. 2.2 Environment should be less than 30℃ and 60% RH when moisture proof bag is opened. 2.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded. 2.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked at min. 60deg +/-5deg for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be 8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527OA1 careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. Revision History 9 Rev. Modified date File modified contents 1 2014/4/30 New Spec Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com