XR33184ESBEVB

XR33180/81/83/84 3V to 5.5V, 52Mbps, TSOT23 RS-485/RS-422 Receivers with ±15kV ESD Protection April 27, 2022 Description The XR33180, XR33181, XR33183 and XR33184 are high performance RS-485/RS-422 receivers designed to meet the increasing system requirements found in today’s high performance serial communication applications. The receiver includes enhanced failsafe circuitry, guaranteeing a logic-high receiver output when the receiver inputs are open, shorted, or undriven. The XR33180/81/83/84 (XR3318x) receiver input impedance is at least 48kΩ (1/4 unit load), allowing more than 128 devices on the bus. The bus pins are ESD protected and pass IEC61000 level 4 (±15kV). This is a wide supply (3.0V to 5.5V) device that operates at a maximum data rate of 52Mbps and comes in very small 5-pin and 6-pin TSOT23 packages, making this standalone receiver ideal for high speed point-to-point RS-485 applications where space is a concern. The XR3318x offers several pinout options to maximize performance in different applications while maintaining a minimum pin count. The XR33180 is available in a 5-pin TSOT23 package with the receiver always enabled. The XR33181 is available in a 6-pin TSOT23 package and offers a active high receiver enable pin while the XR33183 has the same pinout but with active low enable pin. The XR33184 is available in a 6-pin TSOT23 package with a I/O logic supply pin to ease the interface to MCU’s or FPGA’s that run off of different supply voltages. The VL supply pin allows the XR33184 to interface to other devices running off of supplies from ranging from 1.65V to VCC. FEATURES ■ Max 52Mbps data rate ■ Wide 3.0V to 5.5V supply operation ■ Robust Electrostatic Discharge (ESD) protection for RS-485 bus pins ■ ±15kV human body model ■ ±15kV IEC61000-4-2 air discharge ■ ±8kV IEC61000-4-2 contact discharge ■ Enhanced receiver failsafe protection for open, shorted, or terminated but idle data lines ■ -40°C to 125°C ambient operating temperature range ■ Lead-free (RoHS 6) TSOT23-5 and TSOT23-6 packaging ■ Absolute minimum pin count option, XR33180 (5-pin TSOT23) ■ Tri-state RO options, XR33181 and XR33183 ■ Adjustable I/O supply option to help interfacing to lower voltage logic, XR33184 APPLICATIONS ■ Clock distribution ■ Robotic control ■ Space constrained systems ■ Security camera networks ■ Industrial and process control equipment All XR3318x options operate up to a max data rate of 52Mbps, and have excellent propagation delay and skew characteristics making them a good choice for clock fanout or clock distribution systems. XR33184 OBSOLETE Typical Application 3.3V 3.3V to 5.0V VCC VCC A RO 120Ω R D B XR3319x XR3318x GND GND Figure 1. Typical Application 1 XR33180/81/83/84 Absolute Maximum Ratings Operating Conditions Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Maximum Rating condition for extended periods may affect device reliability and lifetime. Operating temperature range....................... -40°C to 125°C VCC supply range..............................................3.0V to 5.5V Thermal Information 5-pin TSOT23 θJA............................................... 185.5°C/W Supply voltage (VCC)....................................... -0.3V to 7.0V 5-pin TSOT23 θJC................................................. 61.6°C/W Junction temperature.................................................. 150°C 6-pin TSOT23 θJA............................................... 167.3°C/W Input Voltages 6-pin TSOT23 θJC................................................. 61.6°C/W EN and EN....................................................... -0.3V to 7.0V Output Voltage RO (XR33180/81/83).......................... -0.3V to (VCC + 0.3V) RO (XR33184)....................................... -0.3V to (VL + 0.3V) Receiver Input Voltages A, B............................................................................... ±18V Transient voltage pulse, through 100Ω(1).................... ±100V ESD Ratings HBM - Human Body Model (A and B pins)................. ±15kV HBM - Human Body Model (all other pins)................... ±4kV IEC61000-4-2 Air Gap Discharge............................... ±15kV IEC61000-4-2 Contact Discharge................................. ±8kV NOTE: 1. Refer to Figure 3. Electrical Characteristics Specifications are at TA = 25°C, VCC = 3.0V to 5.5V unless otherwise noted. Typical values represent the most likely parametric norm at TA = 25°C, and are provided for reference purposes only. Symbol Parameter Conditions Min Typ Max Units 3.0 5.5 V 1.65 VCC V 5 mA 10 μA -50 mV Supply VCC Supply voltage range VL I/O supply voltage range VL ≤ VCC ICC Supply current No Load, XR33180/81/83/84 IL I/O supply No Load, XR33184 2.5 Receiver DC Characteristics VTH Receiver differential threshold voltage, VA - VB -7V ≤ VCM ≤ 12V ∆VOH Receiver input hysteresis VCM = 0V RIN Receiver input resistance -7V ≤ VCM ≤ 12V IA,B Input current, A and B 238DSR00 -200 -125 25 48 VOUT = 12V, VCC = 0V or 5.5V VOUT = -7V, VCC = 0V or 5.5V 2 mV kΩ 250 -200 μA μA Rev. 1D XR33180/81/83/84 Electrical Characteristics Specifications are at TA = 25°C, VCC = 3.0V to 5.5V unless otherwise noted. Typical values represent the most likely parametric norm at TA = 25°C, and are provided for reference purposes only. Symbol Parameter Conditions Min 2 Typ Max Units Logic Inputs/Outputs VIH Logic high input thresholds, EN and EN XR33181/83 VIL Logic low input thresholds, EN and EN XR33181/83 IENLEAK Enable pin leakage XR33181/83 VOH Receiver output high voltage, RO IOUT = -4mA, XR33180/81/83 VOL Receiver output low voltage, RO IOUT = 4mA, XR33180/81/83 VOH Receiver output high voltage, RO 3.0V ≤ VL ≤ 5.5V, IOUT = -4mA 1.65V ≤ VL ≤ 3.0V, IOUT = -1mA, XR33184 VOL Receiver output low voltage, RO 3.0V ≤ VL ≤ 5.5V, IOUT = 4mA 1.65V ≤ VL ≤ 3.0V, IOUT = 1mA, XR33184 IOSC Receiver output short-circuit current 0V ≤ VRO ≤ VL IOZR High-Z receiver output current 0V ≤ VOUT ≤ VCC, XR33180/81/83 0V ≤ VOUT ≤ VL, XR33184 V -10 0.4 V 10 μA VCC - 0.4 V 0.4 VL - 0.4 V V 0.4 V -120 120 mA -1 1 μA Thermal Characteristics TTS Thermal shutdown temperature 168 °C TTSH Thermal shutdown hysteresis 15 °C Receiver AC Characteristics tRPLH Receiver propagation delay, low to high tRPHL Receiver propagation delay, high to low |tRPLH - tRPHL| Receiver propagation delay skew CL = 15pF, VID = ±2V, VID rise and fall times