FCI11N60_0507

FCI11N60 600V N-Channel MOSFET July 2005 SuperFET FCI11N60 600V N-Channel MOSFET Features • 650V @TJ = 150°C • Typ. RDS(on) = 0.32Ω • Ultra Low Gate Charge (typ. Qg = 40nC) • Low Effective Output Capacitance (typ. Cosseff. = 95pF) • 100% Avalanche Tested TM Description SuperFETTM is, Farichild’s proprietary, new generation of high voltage MOSFET family that is utilizing an advanced charge balance mechanism for outstanding low on-resistance and lower gate charge performance. This advanced technology has been tailored to minimize conduction loss, provide superior switching performance, and withstand extreme dv/dt rate and higher avalanche energy. Consequently, SuperFET is very suitable for various AC/DC power conversion in switching mode operation for system miniaturization and higher efficiency. D G GDS S Absolute Maximum Ratings Symbol VDSS ID IDM VGSS EAS IAR EAR dv/dt PD TJ, TSTG TL Drain-Source Voltage Drain Current Drain Current Gate-Source voltage Single Pulsed Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Power Dissipation (TC = 25°C) - Derate above 25°C (Note 2) (Note 1) (Note 1) (Note 3) Parameter - Continuous (TC = 25°C) - Continuous (TC = 100°C) - Pulsed (Note 1) FCI11N60 600 11 7 33 ± 30 340 11 12.5 4.5 125 1.0 -55 to +150 300 Unit V A A A V mJ A mJ V/ns W W/°C °C °C Operating and Storage Temperature Range Maximum Lead Temperature for Soldering Purpose, 1/8” from Case for 5 Seconds Thermal Characteristics Symbol RθJC RθJA Parameter Thermal Resistance, Junction-to-Case Thermal Resistance, Junction-to-Ambient FCI11N60 1.0 62.5 Unit °C/W °C/W ©2005 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com FCI11N60 Rev. A1 FCI11N60 600V N-Channel MOSFET Package Marking and Ordering Information Device Marking FCI11N60 Device FCI11N60 Package I2-PAK TC = 25°C unless otherwise noted Reel Size -- Tape Width -- Quantity 50 Electrical Characteristics Symbol Off Characteristics BVDSS ∆BVDSS / ∆TJ BVDS IDSS IGSSF IGSSR VGS(th) RDS(on) gFS Ciss Coss Crss Coss Coss eff. td(on) tr td(off) tf Qg Qgs Qgd IS ISM VSD trr Qrr Notes: Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source Avalanche Breakdown Voltage Zero Gate Voltage Drain Current Gate-Body Leakage Current, Forward Gate-Body Leakage Current, Reverse Gate Threshold Voltage Static Drain-Source On-Resistance Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Conditions VGS = 0V, ID = 250µA, TJ = 25°C VGS = 0V, ID = 250µA, TJ = 150°C ID = 250µA, Referenced to 25°C VGS = 0V, ID = 11A VDS = 600V, VGS = 0V VDS = 480V, TC = 125°C VGS = 30V, VDS = 0V VGS = -30V, VDS = 0V VDS = VGS, ID = 250µA VGS = 10V, ID = 5.5A VDS = 40V, ID = 5.5A VDS = 25V, VGS = 0V, f = 1.0MHz (Note 4) Min 600 -------3.0 ----------(Note 4, 5) Typ -650 0.6 700 -----0.32 9.7 1148 671 63 35 95 34 98 119 56 40 7.2 21 ---390 5.7 Max Units ----1 10 100 -100 5.0 0.38 -1490 870 ---80 205 250 120 52 --11 33 1.4 --V V V/°C V µA µA nA nA V Ω S pF pF pF pF pF ns ns ns ns nC nC nC A A V ns µC On Characteristics Dynamic Characteristics VDS = 480V, VGS = 0V, f = 1.0MHz VDS = 0V to 400V, VGS = 0V VDD = 300V, ID = 11A RG = 25Ω Switching Characteristics --------- VDS = 480V, ID = 11A VGS = 10V (Note 4, 5) Drain-Source Diode Characteristics and Maximum Ratings Maximum Continuous Drain-Source Diode Forward Current Maximum Pulsed Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge VGS = 0V, IS = 11A VGS = 0V, IS = 11A dIF/dt =100A/µs (Note 4) -- 1. Repetitive Rating: Pulse width limited by maximum junction temperature 2. IAS = 5.5A, VDD = 50V, RG = 25Ω, Starting TJ = 25°C 3. ISD ≤ 11A, di/dt ≤ 200A/µs, VDD ≤ BVDSS, Starting TJ = 25°C 4. Pulse Test: Pulse width ≤ 300µs, Duty Cycle ≤ 2% 5. Essentially Independent of Operating Temperature Typical Characteristics FCI11N60 Rev. A1 2 www.fairchildsemi.com FCI11N60 600V N-Channel MOSFET Typical Performance Characteristics Figure 1. On-Region Characteristics 10 2 Figure 2. Transfer Characteristics VGS Top : 15.0 V 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V Bottom : 5.5 V ID, Drain Current [A] 10 1 ID , Drain Current [A] 10 1 150 C o 10 0 10 0 25 C o -55 C o 10 -1 * Notes : 1. 250 µs Pulse Test o 2. TC = 25 C * Note 1. VDS = 40V 2. 250 µs Pulse Test 10 10 -1 -1 10 0 10 1 2 4 6 8 10 VDS, Drain-Source Voltage [V] VGS , Gate-Source Voltage [V] Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage 1.0 Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperatue 0.8 IDR , Reverse Drain Current [A] RDS(ON) [Ω], Drain-Source On-Resistance VGS = 10V 0.6 10 1 0.4 VGS = 20V 10 0 150 C o 25 C * Notes : 1. VGS = 0V 2. 250 µs Pulse Test o 0.2 * Note : TJ = 25 C o 0.0 0 5 10 15 20 25 30 35 40 10 -1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 ID, Drain Current [A] VSD , Source-Drain Voltage [V] Figure 5. Capacitance Characteristics 6000 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd Figure 6. Gate Charge Characteristics 12 VDS = 100V 5000 VGS, Gate-Source Voltage [V] 10 VDS = 250V VDS = 400V Capacitance [pF] 4000 8 3000 Coss * Notes : 1. VGS = 0 V 2. f = 1 MHz 6 2000 Ciss Crss 4 1000 2 * Note : ID = 11A 0 -1 10 10 0 10 1 0 0 5 10 15 20 25 30 35 40 45 VDS, Drain-Source Voltage [V] QG, Total Gate Charge [nC] FCI11N60 Rev. A1 3 www.fairchildsemi.com FCI11N60 600V N-Channel MOSFET Typical Performance Characteristics (Continued) Figure 7. Breakdown Voltage Variation vs. Temperature 1.2 Figure 8. On-Resistance Variation vs. Temperature 3.0 BVDSS, (Normalized) Drain-Source Breakdown Voltage RDS(ON), (Normalized) Drain-Source On-Resistance 2.5 1.1 2.0 1.0 1.5 0.9 Notes : 1. VGS = 0 V 2. ID = 250µA 1.0 * Notes : 1. VGS = 10 V 2. ID = 5.5 A 0.5 0.8 -100 -50 0 50 100 o 150 200 0.0 -100 -50 0 50 100 o 150 200 TJ, Junction Temperature [ C] TJ, Junction Temperature [ C] Figure 9. Maximum Safe Operating Area Figure 10. Maximum Drain Current vs. Case Temperature 12.5 10 2 Operation in This Area is Limited by R DS(on) ID, Drain Current [A] 1 ms 10 ms DC ID, Drain Current [A] 3 10 1 100 us 10.0 7.5 10 0 5.0 10 -1 * Notes : o 1. TC = 25 C 2. TJ = 150 C 3. Single Pulse o 2.5 10 -2 10 0 10 1 10 2 10 0.0 25 50 75 100 o 125 150 VDS, Drain-Source Voltage [V] TC, Case Temperature [ C] Figure 11. Transient Thermal Response Curve 10 0 D = 0 .5 ZθJC(t), Thermal Response 0 .2 10 -1 0 .1 0 .0 5 0 .0 2 0 .0 1 s in g le p u ls e * N o te s : o 1 . Z θ JC ( t) = 1 .0 C /W M a x. 2 . D u ty F a c to r, D = t 1 /t 2 3 . T J M - T C = P D M * Z θ JC ( t) PDM t1 t2 10 0 10 -2 10 -5 10 -4 10 -3 10 -2 10 -1 10 1 t 1 , S q u a re W a v e P u ls e D u ra tio n [s e c ] FCI11N60 Rev. A1 4 www.fairchildsemi.com FCI11N60 600V N-Channel MOSFET Gate Charge Test Circuit & Waveform 50KΩ 12V 200nF 300nF Same Type as DUT VDS VGS 10V Qgs Qg VGS Qgd DUT 3mA Charge Resistive Switching Test Circuit & Waveforms VDS RG 10V VGS RL VDD VDS 90% DUT VGS 10% td(on) t on tr td(off) t off tf Unclamped Inductive Switching Test Circuit & Waveforms L VDS ID RG 10V tp BVDSS 1 EAS = ---- L IAS2 -------------------2 BVDSS - VDD BVDSS IAS VDD ID (t) VDD tp DUT VDS (t) Time FCI11N60 Rev. A1 5 www.fairchildsemi.com FCI11N60 600V N-Channel MOSFET Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + VDS _ I SD L Driver RG Same Type as DUT VDD VGS • dv/dt controlled by RG • ISD controlled by pulse period VGS ( Driver ) Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current I SD ( DUT ) IRM di/dt Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt VSD VDD Body Diode Forward Voltage Drop FCI11N60 Rev. A1 6 www.fairchildsemi.com FCI11N60 600V N-Channel MOSFET Mechanical Dimensions I2-PAK 9.90 ±0.20 (0.40) 4.50 ±0.20 +0.10 1.30 –0.05 1.20 ±0.20 9.20 ±0.20 MAX 3.00 (1.46) 13.08 ±0.20 (0.94) 1.27 ±0.10 1.47 ±0.10 0.80 ±0.10 10.08 ±0.20 MAX13.40 (4 ) 5° 2.54 TYP 2.54 TYP 0.50 –0.05 +0.10 2.40 ±0.20 10.00 ±0.20 Dimensions in Millimeters FCI11N60 Rev. A1 7 www.fairchildsemi.com FCI11N60 600V N-Channel MOSFET TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™ FAST® FASTr™ FPS™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I16 Preliminary No Identification Needed Full Production Obsolete Not In Production 8 FCI11N60 Rev. A1 www.fairchildsemi.com