FDD6030

F DD6030BL April 1999 ADVANCE INFORMATION FDD6030BL N-Channel PowerTrenchTM MOSFET General Description This N-Channel Logic level MOSFET is produced using Fairchild Semiconductor's advanced PowerTrench process that has been especially tailored to minimize the onstate resistance and yet maintain low gate charge for superior switching performance. Features • 35 A, 30 V. RDS(ON) = 0.018 Ω @ VGS = 10 V RDS(ON) = 0.025 Ω @ VGS = 4.5 V. • • • Low gate charge. Fast switching speed. High performance trench technology for extremely low RDS(ON). Applications • • DC/DC converter Motor drives D D G S TO-252 S T C=25 C unless otherwise noted o G Absolute Maximum Ratings Symbol VDSS VGSS ID Drain-Source Voltage Gate-Source Voltage Maximum Drain Current Maximum Drain Current PD Parameter Ratings 30 ±20 35 9 100 (Note 1) (Note 1a) (Note 1b) Units V V A -Continuous -Pulsed T A = 2 5 oC T A = 2 5 oC (Note 1) (Note 1a) Maximum Power Dissipation @ T C = 25oC 44 2.8 1.3 -55 to +150 W TJ, T stg Operating and Storage Junction Temperature Range °C Thermal Characteristics RθJC RθJA Thermal Resistance, Junction-to- Case Thermal Resistance, Junction-to- Ambient (Note 1) (Note 1b) 2.8 96 °C/W °C/W Package Marking and Ordering Information Device Marking FDD6030BL Device FDD6030BL Reel Size 13’’ Tape width 16mm Quantity 2500 ©1999 Fairchild Semiconductor Corporation FDD6030BL Rev. A F DD6030BL Electrical Characteristics Symbol Parameter TC=25 C unless otherwise noted o Test Conditions Min Typ Max Units OFF CHARACTERISTICS BVDSS IDSS IGSSF IGSSR Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate-Body Leakage, Forward Gate-Body Leakage, Reverse (Note 2) VGS = 0 V, ID = 250 µA VDS = 24 V, VGS = 0 V VGS = 20 V, VDS = 0 V VGS = -20 V, VDS = 0 V 30 1 100 -100 V µA nA nA ON CHARACTERISTICS VGS(TH) RDS(ON) Static Drain-Source On-Resistance Gate Threshold Voltage VDS = VGS, ID = 250 µA VGS = 10 V, ID = 9 A VGS = 4.5 V, ID = 7.5 A 1 3 0.018 0.025 V Ω DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS IS VSD Maximum Continuous Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage VGS = 0 V, IS = 2.3 A 2.3 1.3 A V Notes: 1. RθJA is the sum of the junction-to-case and case-to-ambient resistance where the case thermal reference is defined as the drain tab. RθJC is guaranteed by design while RθJA is determined by the user's board design. a) RθJA= 45oC/W when mounted on a 1in2 pad of 2oz copper. b) RθJA= 96oC/W when mounted on a minimum pad. Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% FDD6030BL Rev. A D-PAK (TO-252) Packaging Configuration: Figure 1.0 N Packaging Description: EL ECT ROST AT IC SEN SIT IVE DEVICES DO NO T SHI P OR STO RE N EAR ST RO NG EL ECT ROST AT IC EL ECT RO M AGN ETI C, M AG NET IC O R R ADIO ACT IVE FI ELD S TNR D ATE PT NUMB ER PEEL STREN GTH MIN ___ __ ____ __ ___gms MAX ___ ___ ___ ___ _ gms Antistatic Cover Tape ESD Label TO-252 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2500 units per 13” or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. Static Dissipative Embossed Carrier Tape F63TNR Label D-PAK (TO-252) Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel(kg) Note/Comments Standard (no flow code) TNR 2,500 13” Dia 359x359x57 5,000 0.300 1.200 D-PAK (TO-252) Unit Orientation 359mm x 359mm x 57mm Standard Intermediate box ESD Label F63TNR Label sample F63TNR Label D/C1: Z9942 D/C2: CBVK741B019 FDD6680 FSID: FDD6680 QTY1: QTY2: LOT: CBVK741B019 QTY: 2500 SPEC: 3000 (F63TNR)3 SPEC REV: CPN: N/F: F TO-252 (D-PAK) Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Components Trailer Tape 640mm minimum or 80 empty pockets Leader Tape 1680mm minimum or 210 empty pockets FZ9935 FDD 6680 FZ9935 FDD 6680 FZ9935 FDD 6680 FZ9935 FDD 6680 D-PAK (TO-252) Embossed Carrier Tape Configuration: Figure 3.0 T P0 D0 E1 F K0 Wc B0 E2 W Tc A0 P1 D1 User Direction of Feed Dimensions are in millimeter Pkg type TO252 (24mm) A0 6.90 +/-0.10 B0 10.50 +/-0.10 W 16.0 +/-0.3 D0 1.55 +/-0.05 D1 1.5 +/-0.10 E1 1.75 +/-0.10 E2 14.25 min F 7.50 +/-0.10 P1 8.0 +/-0.1 P0 4.0 +/-0.1 K0 2.65 +/-0.10 T 0.30 +/-0.05 Wc 13.0 +/-0.3 Tc 0.06 +/-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 10 deg maximum Typical component cavity center line 0.9mm maximum B0 10 deg maximum component rotation 0.9mm maximum Sketch A (Side or Front Sectional View) Component Rotation A0 Sketch B (Top View) Typical component center line Sketch C (Top View) Component lateral movement D-PAK (TO-252) Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max B Min Dim C Dim A max Dim N Dim D min DETAIL AA See detail AA W3 13” Diameter Option W2 max Measured at Hub Dimensions are in inches and millimeters Tape Size 164mm Reel Option 13” Dia Dim A 13.00 330 Dim B 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 Dim N 4.00 100 Dim W1 0.646 +0.078/-0.000 16.4 +2/0 Dim W2 0.882 22.4 Dim W3 (LSL-USL) 0.626 – 0.764 15.9 – 19.4 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ DISCLAIMER ISOPLANAR™ MICROWIRE™ POP™ PowerTrench  QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. D