FFAF10U170S

FFAF10U170S FFAF10U170S Features • High voltage and high reliability • High speed switching • Low forward voltage Applications • Suitable for damper diode in horizontal deflection circuits 1 2 TO-3PF 1. Cathode 2. Anode DAMPER DIODE Absolute Maximum Ratings Symbol VRRM IF(AV) IFSM TJ, TSTG TC=25°C unless otherwise noted Value 1700 @ TC = 125°C 10 100 - 65 to +150 Units V A A °C Parameter Peak Repetitive Reverse Voltage Average Rectified Forward Current Non-repetitive Peak Surge Current 60Hz Single Half-Sine Wave Operating Junction and Storage Temperature Thermal Characteristics Symbol RθJC Parameter Maximum Thermal Resistance, Junction to Case TC=25 °C unless otherwise noted Min. TC = 25 °C TC = 125 °C T C = 25 ° C TC = 125 °C Typ. Max. 2.2 2.0 mA 0.1 10 140 400 13 ns ns V Units V Value 1.5 Units °C/W Electrical Characteristics Symbol VFM * Parameter Maximum Instantaneous Forward Voltage IF = 10A IF = 10A Maximum Instantaneous Reverse Current @ rated VR Maximum Reverse Recovery Time (IF =1A, di/dt = 50A/µs) Maximum Forward Recovery Time (IF =6.5A, di/dt = 50A/µs) Maximum Forward Recovery Voltage IRM * trr tfr VFRM * Pulse Test: Pulse Width=300µs, Duty Cycle=2% ©2001 Fairchild Semiconductor Corporation Rev. A, June 2001 FFAF10U170S Typical Characteristics 10000 100 Forward Current , IF [A] TJ = 125 C 10 o R [µA] 1000 TJ = 125 C o Reverse Current , I 100 T J = 25 C 1 o 10 TJ = 100 C o 1 0.1 TJ = 25 C 0.1 0 1 2 3 4 5 o 0.001 0 300 600 900 1200 1500 1700 Forward Voltage , V F [V] Reverse Voltage , VR [V] Figure 1. Typical Forward Voltage Drop vs. Forward Current 200 Figure 2. Typical Reverse Current vs. Reverse Voltage 300 rr 160 [ns] Typical Capacitance at 0V = 174 pF Capacitance , Cj [pF] Reverse Recovery Time , t di/dt = 50A/µs 200 120 80 100 di/dt = 100A/µs 40 0 0.1 0 1 10 100 1 2 3 4 5 6 7 8 9 10 Reverse Voltage , VR [V] Forward Current , IF [A] Figure 3. Typical Junction Capacitance Figure 4. Typical Reverse Recovery Time vs. Forward Current [A] F(AV) 1500 12 [nC] 10 rr Average Forward Current , I 1200 Stored Recovery Charge , Q 8 DC 900 di/dt = 100A/µs 6 600 4 di/dt = 50A/µs 300 2 0 1 2 3 4 5 6 7 8 9 10 0 80 100 120 140 o 160 Forward Current , IF [A] Case Temperature , TC [ C] Figure 5. Typical Stored Charge vs. Forward Current ©2001 Fairchild Semiconductor Corporation Figure 6. Forward Current Derating Curve Rev. A, June 2001 FFAF10U170S Package Dimensions TO-3PF-2L Dimensions in Millimeters Rev. A, June 2001 ©2001 Fairchild Semiconductor Corporation TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. STAR* POWER™ FAST® OPTOPLANAR™ ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™ FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MICROWIRE™ OPTOLOGIC™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SLIENT SWITCHER® SMART START™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TruTranslation™ TinyLogic™ UHC™ UltraFET® VCX™ STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems 2. A critical component is any component of a life support which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be or (b) support or sustain life, or (c) whose failure to perform reasonably expected to cause the failure of the life support when properly used in accordance with instructions for use device or system, or to affect its safety or effectiveness. provided in the labeling, can be reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2001 Fairchild Semiconductor Corporation Rev. H3