NC7WZ04L6X

NC7WZ04 TinyLogic UHS Dual Inverter March 1999 Revised May 2003 NC7WZ04 TinyLogic UHS Dual Inverter General Description The NC7WZ04 is a dual inverter from Fairchild’s Ultra High Speed Series of TinyLogic in the space saving SC70 6-lead package. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs tolerate voltages up to 7V independent of VCC operating voltage. Features s Space saving SC70 6-lead package s Ultra small MicroPak leadless package s Ultra High Speed: tPD 2.3 ns Typ into 50 pF at 5V VCC s High Output Drive: ±24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Matches the performance of LCX when operated at 3.3V VCC s Power down high impedance inputs/outputs s Overvoltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented Ordering Code: Order Number NC7WZ04P6X NC7WZ04L6X Package Number MAA06A MAC06A Product Code Top Mark Z04 A7 Package Description 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 5k Units on Tape and Reel Logic Symbol IEEE/IEC Connection Diagrams Pin Assignments for SC70 Pin Descriptions Pin Names A1 , A2 Y1 , Y2 Description Data Inputs Output (Top View) Pin One Orientation Diagram Function Table Y=A Input A L H H = HIGH Logic Level AAA represents Product Code Top Mark - see ordering code Note: Orientation of Top Mark determines Pin One location. Read the Top Product Code Mark left to right, Pin One is the lower left pin (see diagram). Output Y H L L = LOW Logic Level Pad Assignments for MicroPak (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. © 2003 Fairchild Semiconductor Corporation DS500215 www.fairchildsemi.com NC7WZ04 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC ) DC Input Voltage (VIN) DC Output Voltage (VOUT) DC Input Diode Current (IIK) VIN < 0V DC Output Diode Current (IOK) VOUT < 0V DC Output Source/Sink Current (IOUT) DC VCC/GND Current (ICC/IGND) Storage Temperature (TSTG) Junction Temperature under Bias (TJ) Junction Lead Temperature (TL) (Soldering, 10 seconds) Power Dissipation (PD) @ +85°C 260 °C 180 mW −0.5V to +7.0V −0.5V to +7.0V −0.5V to +7.0V −50 mA −50 mA ±50 mA ±100 mA −65°C to +150 °C 150 °C Recommended Operating Conditions (Note 2) Supply Voltage Operating (VCC) Data Retention Input Voltage (VIN) Output Voltage (VOUT) Input Rise and Fall time (tr, tf) VCC = 1.8V, 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5.5V ± 0.5V Operating Temperature (TA) Thermal Resistance (θJA) 0 to 20 ns/V 0 to 10 ns/V 0 to 5 ns/V 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V 0V to VCC −40°C to +85°C 350°C/W Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Control Input Voltage LOW Level Control Input Voltage HIGH Level Control Output Voltage VCC (V) 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL LOW Level Control Output Voltage 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN IOFF ICC Input Leakage Current Power Off Leakage Current Quiescent Supply Current 0 to 5.5 0.0 1.65 to 5.5 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 1.65 1.8 2.3 3.0 4.5 1.52 2.14 2.75 2.62 4.13 0.1 0.0 0.0 0.0 0.0 0.08 0.10 0.16 0.24 0.25 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 ±0.1 1.0 1.0 Min 0.7 VCC 0.25 VCC 0.3 VCC 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 ±1.0 10 10 µA µA µA V VIN = VIH IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 0 ≤ VIN ≤ 5.5V VIN or VOUT = 5.5V VIN = 5.5V, GND IOL = 100 µA V VIN = VIL IOH = −4 mA IOH = −8 mA IOH = −16 mA IOH = −24 mA IOH = −32 mA IOH = −100 µA 1.65 to 1.95 0.75 VCC TA = +25°C Typ Max TA = −40°C to +85°C Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC Max V V Units Conditions www.fairchildsemi.com 2 NC7WZ04 AC Electrical Characteristics Symbol tPLH tPHL Parameter Propagation Delay VCC (V) 1.65 1.8 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 tPLH tPHL CIN CPD Input Capacitance Power Dissipation Capacitance Propagation Delay 3.3 ± 0.3 5.0 ± 0.5 0 3.3 5.0 Min 1.8 1.8 1.2 0.8 0.5 1.2 0.8 TA = +25°C Typ 5.3 4.4 3.0 2.2 1.8 2.9 2.3 2.5 9 11 Max 9.2 7.6 5.1 3.4 2.8 4.5 3.6 TA = −40°C to +85°C Min 1.8 1.8 1.2 0.8 0.5 1.2 0.8 Max 11.0 8.4 5.6 3.8 3.1 5.0 4.0 ns pF pF (Note 3) Figure 2 CL = 50 pF, RL = 500Ω Figures 1, 3 ns CL = 15 pF, RL = 1 MΩ Figures 1, 3 Units Conditions Figure Number Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500 ns FIGURE 1. AC Test Circuit Input = AC Waveform; tr = tf = 1.8 ns; PRR = variable; Duty Cycle = 50% FIGURE 3. AC Waveforms FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7WZ04 Tape and Reel Specification TAPE FORMAT for SC70 Package Designator P6X Tape Section Leader (Start End) Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Package SC70-6 Tape Size 8 mm DIM A 0.093 (2.35) DIM B 0.096 (2.45) DIM F (3.5 ± 0.10) DIM Ko (1.35 ± 0.10) DIM P1 0.157 (4) DIM W 0.315 ± 0.004 (8 ± 0.1) 0.138 ± 0.004 0.053 ± 0.004 www.fairchildsemi.com 4 NC7WZ04 Tape and Reel Specification TAPE FORMAT for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) (Continued) Number Cavities 125 (typ) 5000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) W2 0.567 (14.40) W3 W1 + 0.078/−0.039 (W1 + 2.00/−1.00) 5 www.fairchildsemi.com NC7WZ04 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A www.fairchildsemi.com 6 NC7WZ04 TinyLogic UHS Dual Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 7 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com