MRFE6VP61K25HSR6

Freescale Semiconductor Technical Data Document Number: MRFE6VP61K25H Rev. 0, 11/2010 RF Power Field Effect Transistors High Ruggedness N--Channel Enhancement--Mode Lateral MOSFETs These high ruggedness devices are designed for use in high VSWR industrial (including laser and plasma exciters), broadcast (analog and digital), aerospace and radio/land mobile applications. They are unmatched input and output designs allowing wide frequency range utilization, between 1.8 and 600 MHz. • Typical Performance: VDD = 50 Volts, IDQ = 100 mA Signal Type Pulsed (100 μsec, 20% Duty Cycle) CW Pout (W) 1250 Peak 1250 CW f (MHz) 230 230 Gps (dB) 24.0 22.9 ηD (%) 74.0 74.6 IRL (dB) --14 --15 MRFE6VP61K25HR6 MRFE6VP61K25HSR6 1.8-600 MHz, 1250 W CW, 50 V LATERAL N-CHANNEL BROADBAND RF POWER MOSFETs • Capable of Handling a Load Mismatch of 65:1 VSWR, @ 50 Vdc, 230 MHz, at all Phase Angles, Designed for Enhanced Ruggedness, 1250 Watts Pulsed Peak Power, 20% Duty Cycle, 100 μsec • Capable of 1250 Watts CW Operation Features • Unmatched Input and Output Allowing Wide Frequency Range Utilization • Device can be used Single--Ended or in a Push--Pull Configuration • Qualified Up to a Maximum of 50 VDD Operation • Characterized from 30 V to 50 V for Extended Power Range • Suitable for Linear Application with Appropriate Biasing • Integrated ESD Protection with Greater Negative Gate--Source Voltage Range for Improved Class C Operation • Characterized with Series Equivalent Large--Signal Impedance Parameters • RoHS Compliant • In Tape and Reel. R6 Suffix = 150 Units, 56 mm Tape Width, 13 inch Reel. Table 1. Maximum Ratings Rating Drain--Source Voltage Gate--Source Voltage Storage Temperature Range Case Operating Temperature Total Device Dissipation @ TC = 25°C Derate above 25°C Operating Junction Temperature (1,2) Symbol VDSS VGS Tstg TC PD TJ Value --0.5, +125 --6.0, +10 -- 65 to +150 150 1333 6.67 225 Unit Vdc Vdc °C °C W W/°C °C CASE 375D-05, STYLE 1 NI-1230 MRFE6VP61K25HR6 CASE 375E-04, STYLE 1 NI-1230S MRFE6VP61K25HSR6 PARTS ARE PUSH-PULL RFin/VGS 3 1 RFout/VDS RFout/VGS 4 2 RFout/VDS (Top View) Figure 1. Pin Connections Table 2. Thermal Characteristics Characteristic Thermal Resistance, Junction to Case Case Temperature 66°C, 1250 W Pulsed, 100 μsec Pulse Width, 20% Duty Cycle, 100 mA, 230 MHz Case Temperature 63°C, 1250 W CW, 100 mA, 230 MHz Symbol ZθJC RθJC Value (2,3) 0.03 0.15 Unit °C/W 1. Continuous use at maximum temperature will affect MTTF. 2. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. 3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes -- AN1955. © Freescale Semiconductor, Inc., 2010. All rights reserved. MRFE6VP61K25HR6 MRFE6VP61K25HSR6 1 RF Device Data Freescale Semiconductor Table 3. ESD Protection Characteristics Test Methodology Human Body Model (per JESD22--A114) Machine Model (per EIA/JESD22--A115) Charge Device Model (per JESD22--C101) Class 2 (Minimum) B (Minimum) IV (Minimum) Table 4. Electrical Characteristics (TA = 25°C unless otherwise noted) Characteristic Off Characteristics (1) Symbol IGSS V(BR)DSS IDSS IDSS Min — 125 — — Typ — — — — Max 1 — 10 20 Unit μAdc Vdc μAdc μAdc Gate--Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) Drain--Source Breakdown Voltage (VGS = 0 Vdc, ID = 100 mA) Zero Gate Voltage Drain Leakage Current (VDS = 50 Vdc, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 100 Vdc, VGS = 0 Vdc) On Characteristics Gate Threshold Voltage (1) (VDS = 10 Vdc, ID = 1776 μAdc) Gate Quiescent Voltage (VDD = 50 Vdc, ID = 100 mAdc, Measured in Functional Test) Drain--Source On--Voltage (1) (VGS = 10 Vdc, ID = 2 Adc) Dynamic Characteristics (1) Reverse Transfer Capacitance (VDS = 50 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Output Capacitance (VDS = 50 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Input Capacitance (VDS = 50 Vdc, VGS = 0 Vdc ± 30 mV(rms)ac @ 1 MHz) VGS(th) VGS(Q) VDS(on) 1.7 1.4 — 2.2 2.2 0.15 2.7 2.9 — Vdc Vdc Vdc Crss Coss Ciss — — — 2.8 185 562 — — — pF pF pF Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 50 Vdc, IDQ = 100 mA, Pout = 1250 W Peak (250 W Avg.), f = 230 MHz, Pulsed, 100 μsec Pulse Width, 20% Duty Cycle Power Gain Drain Efficiency Input Return Loss Gps ηD IRL 23.0 72.5 — 24.0 74.0 --14 26.0 — --10 dB % dB Pulsed RF Performance (In Freescale Application Test Fixture, 50 ohm system) VDD = 50 Vdc, IDQ = 100 mA, Pout = 1250 W Peak (250 W Avg.), f = 230 MHz, Pulsed, 100 μsec Pulse Width, 20% Duty Cycle Load Mismatch (VSWR 65:1 at all Phase Angles) 1. Each side of device measured separately. Ψ No Degradation in Output Power MRFE6VP61K25HR6 MRFE6VP61K25HSR6 2 RF Device Data Freescale Semiconductor VBIAS + C10 C11 C12 C13 R1 Z11 COAX1 Z3 RF INPUT Z1 Z2 C1 Z4 C3 C2 Z5 Z7 Z9 L1 Z13 Z6 C4 Z8 C5 Z10 L2 Z14 Z12 COAX2 VBIAS R2 + C6 C7 C8 C9 + L3 Z19 Z17 Z15 Z21 Z23 Z25 C21 C22 + C23 + C24 VSUPPLY COAX3 C16 C17 Z29 RF Z30 OUTPUT C20 Z27 DUT C14 C15 Z16 Z22 Z18 Z20 L4 Z24 Z26 C18 C19 Z28 COAX4 + C25 C26 + C27 + C28 VSUPPLY Z1 Z2 Z3, Z4 Z5, Z6 Z7, Z8 Z9, Z10 0.192″ x 0.082″ Microstrip 0.175″ x 0.082″ Microstrip 0.170″ x 0.100″ Microstrip 0.116″ x 0.285″ Microstrip 0.116″ x 0.285″ Microstrip 0.108″ x 0.285″ Microstrip Z11*, Z12* Z13, Z14 Z15, Z16 Z17*, Z18* Z19*, Z20* Z21, Z22 0.872″ x 0.058″ Microstrip 0.412″ x 0.726″ Microstrip 0.371″ x 0.507″ Microstrip 0.466″ x 0.363″ Microstrip 1.187″ x 0.154″ Microstrip 0.104″ x 0.507″ Microstrip Z23, Z24 Z25, Z26 Z27, Z28 Z29 Z30 1.251″ x 0.300″ Microstrip 0.127″ x 0.300″ Microstrip 0.116″ x 0.300″ Microstrip 0.186″ x 0.082″ Microstrip 0.179″ x 0.082″ Microstrip * Line length includes microstrip bends Figure 2. MRFE6VP61K25HR6(HSR6) Test Circuit Schematic — Pulsed MRFE6VP61K25HR6 MRFE6VP61K25HSR6 RF Device Data Freescale Semiconductor 3 C10 C11 C12 C13 C22 C23 C21 COAX1 R1 COAX3 L3 C16 C2 C4 L1 C5 L2 C14 C15 C17 CUT OUT AREA C1 C3 C18 C19 COAX2 R2 L4 COAX4 C25 C6 C7 C8 C9 MRFE6VP61K25H Rev. 3 C26 -- C27 Figure 3. MRFE6VP61K25HR6(HSR6) Test Circuit Component Layout — Pulsed Table 5. MRFE6VP61K25HR6(HSR6) Test Circuit Component Designations and Values — Pulsed Part C1 C2, C3, C5 C4 C6, C10 C7, C11 C8, C12 C9, C13, C21, C25 C14 C15 C16, C17, C18, C19 C20 C22, C23, C24, C26, C27, C28 Coax1, 2, 3, 4 L1, L2 L3, L4 R1, R2 PCB Description 20 pF Chip Capacitor 27 pF Chip Capacitors 0.8--8.0 pF Variable Capacitor, Gigatrim 22 μF, 35 V Tantalum Capacitors 0.1 μF Chip Capacitors 220 nF Chip Capacitors 1000 pF Chip Capacitors 43 pF Chip Capacitor 75 pF Metal Mica 240 pF Chip Capacitors 6.2 pF Chip Capacitor 470 μF, 63 V Electrolytic Capacitors 25 Ω Semi Rigid Coax, 2.2″ Long 5 nH Inductors 6.6 nH Inductors 10 Ω Chip Resistors 0.030″, εr = 2.55 Part Number ATC100B200JT500XT ATC100B270JT500XT 27291SL T491X226K035AT CDR33BX104AKYS C1812C224K5RACTU ATC100B102JT50XT ATC100B430JT500XT MIN02--002EC750J--F ATC100B241JT200XT ATC100B6R2BT500XT MCGPR63V477M13X26--RH UT--141C--25 A02TKLC GA3093--ALC CRCW120610R0JNEA AD255A Manufacturer ATC ATC Johanson Kemet AVX Kemet ATC ATC CDE ATC ATC Multicomp Micro--Coax Coilcraft Coilcraft Vishay Arlon MRFE6VP61K25HR6 MRFE6VP61K25HSR6 4 RF Device Data Freescale Semiconductor --- -- C24 C20 C28 TYPICAL CHARACTERISTICS 2000 Pout, OUTPUT POWER (dBm) PULSED 1000 Ciss 66 65 64 63 62 61 60 59 35 VDD = 50 Vdc, IDQ = 100 mA, f = 230 MHz Pulse Width = 100 μsec, 20% Duty Cycle 36 37 38 39 40 41 42 P3dB = 61.9 dBm (1553 W) P2dB = 61.7 dBm (1472 W) Ideal C, CAPACITANCE (pF) 100 Coss P1dB = 61.3 dBm (1333 W) Actual 10 Crss 1 Measured with ±30 mV(rms)ac @ 1 MHz VGS = 0 Vdc 0 10 20 30 40 50 VDS, DRAIN--SOURCE VOLTAGE (VOLTS) Pin, INPUT POWER (dBm) PULSED Note: Each side of device measured separately. Figure 4. Capacitance versus Drain-Source Voltage 26 25 Gps, POWER GAIN (dB) 24 23 Gps 22 21 ηD 20 100 1000 Pout, OUTPUT POWER (WATTS) PULSED 30 2000 50 40 VDD = 50 Vdc, IDQ = 100 mA, f = 230 MHz Pulse Width = 100 μsec, 20% Duty Cycle 90 80 ηD, DRAIN EFFICIENCY (%) Gps, POWER GAIN (dB) 70 60 26 25 24 23 22 21 20 19 18 17 16 0 Figure 5. Pulsed Output Power versus Input Power VDD = 50 Vdc, IDQ = 100 mA, f = 230 MHz Pulse Width = 100 μsec, 20% Duty Cycle 50 V 40 V 35 V VDD = 30 V 200 400 600 800 1000 1200 1400 1600 45 V Pout, OUTPUT POWER (WATTS) PULSED Figure 6. Pulsed Power Gain and Drain Efficiency versus Output Power 90 80 ηD, DRAIN EFFICIENCY (%) 70 60 50 40 30 20 VDD = 50 Vdc, IDQ = 100 mA, f = 230 MHz Pulse Width = 100 μsec, 20% Duty Cycle 0 200 400 600 800 1000 1200 1400 1600 VDD = 30 V 35 V 40 V 45 V 50 V Gps, POWER GAIN (dB) 26 Figure 7. Pulsed Power Gain versus Output Power 90 80 ηD, DRAIN EFFICIENCY (%) VDD = 50 Vdc, IDQ = 100 mA, f = 230 MHz 25 Pulse Width = 100 μsec, 20% Duty Cycle 24 23 25_C TC = --30_C --30_C 25_C 85_C 70 60 50 22 Gps 21 20 19 100 ηD 1000 Pout, OUTPUT POWER (WATTS) PULSED 85_C 40 30 20 2000 Pout, OUTPUT POWER (WATTS) PULSED Figure 8. Pulsed Drain Efficiency versus Output Power Figure 9. Pulsed Power Gain and Drain Efficiency versus Output Power MRFE6VP61K25HR6 MRFE6VP61K25HSR6 RF Device Data Freescale Semiconductor 5 TYPICAL CHARACTERISTICS 109 108 MTTF (HOURS) 107 106 105 104 90 110 130 150 170 190 210 230 250 TJ, JUNCTION TEMPERATURE (°C) This above graph displays calculated MTTF in hours when the device is operated at VDD = 50 Vdc, Pout = 1250 W CW, and ηD = 74.6%. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF calculators by product. Figure 10. MTTF versus Junction Temperature — CW MRFE6VP61K25HR6 MRFE6VP61K25HSR6 6 RF Device Data Freescale Semiconductor Zsource f = 230 MHz Zo = 5 Ω Zload f = 230 MHz VDD = 50 Vdc, IDQ = 100 mA, Pout = 1250 W Peak f MHz 230 Zsource Ω 1.29 + j3.54 Zload Ω 2.12 + j2.68 Zsource = Test circuit impedance as measured from gate to gate, balanced configuration. Zload = Test circuit impedance as measured from drain to drain, balanced configuration. Input Matching Network + Device Under Test -- Output Matching Network -Z source Z + load Figure 11. Series Equivalent Source and Load Impedance MRFE6VP61K25HR6 MRFE6VP61K25HSR6 RF Device Data Freescale Semiconductor 7 PACKAGE DIMENSIONS MRFE6VP61K25HR6 MRFE6VP61K25HSR6 8 RF Device Data Freescale Semiconductor MRFE6VP61K25HR6 MRFE6VP61K25HSR6 RF Device Data Freescale Semiconductor 9 MRFE6VP61K25HR6 MRFE6VP61K25HSR6 10 RF Device Data Freescale Semiconductor MRFE6VP61K25HR6 MRFE6VP61K25HSR6 RF Device Data Freescale Semiconductor 11 PRODUCT DOCUMENTATION AND SOFTWARE Refer to the following documents and software to aid your design process. Application Notes • AN1955: Thermal Measurement Methodology of RF Power Amplifiers Engineering Bulletins • EB212: Using Data Sheet Impedances for RF LDMOS Devices Software • Electromigration MTTF Calculator • RF High Power Model • .s2p File For Software, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool. REVISION HISTORY The following table summarizes revisions to this document. Revision 0 Date Nov. 2010 • Initial Release of Data Sheet Description MRFE6VP61K25HR6 MRFE6VP61K25HSR6 12 RF Device Data Freescale Semiconductor How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516 2100 East Elliot Road Tempe, Arizona 85284 1--800--521--6274 or +1--480--768--2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1--8--1, Shimo--Meguro, Meguro--ku, Tokyo 153--0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center 1--800--441--2447 or +1--303--675--2140 Fax: +1--303--675--2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2010. All rights reserved. MRFE6VP61K25HR6 MRFE6VP61K25HSR6 Document Number: RF Device Data MRFE6VP61K25H Rev. 0, 11/2010 Freescale Semiconductor 13