HS4040RAQ3TP

Teccor® brand Thyristors 40 Amp High Temperature Low Tq SCR HS4040xAQx Series RoHS Description The HS4040xAQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These fast turn-off time SCRs offer high dv/dt and high di/dt characteristics required in higher frequency (>1000 PPS) switching circuits and a higher temperature environment. Features & Benefits • RoHS compliant • Voltage capability up to 400 V Main Features Symbol • Surge capability up to 520 A • TO-220 and TO-263 packages • AEC-Q101 Fully compliant • 150°C maximum junction temperature Value Unit IT(RMS) 40 A Applications VDRM /VRRM 400 V 15 to 65 mA Fast turn-off time SCRs are ideal for multi phase voltage regulator circuits, DC/AC inverters, and higher frequency pulsing power supplies. IGT Schematic Symbol A K G Absolute Maximum Ratings Parameter Test Conditions Value Unit IT(RMS) Symbol RMS on-state current TC = 115°C 40 A IT(AV) Average on-state current A ITSM I 2t di/dt IGM PG(AV) Tstg TJ VDSM/VRSM HS4040xAQx Series S4040xQx Series TC = 115°C 25.0 single half cycle; f = 50Hz; TJ (initial) = 25°C 430 single half cycle; f = 60Hz; TJ (initial) = 25°C 520 I2t Value for fusing tp = 8.3 ms 1122 A2s Critical rate of rise of on-state current f = 60Hz ; TJ = 150°C 175 A/μs Peak gate current TJ = 150°C 3.5 A Average gate power dissipation TJ = 150°C Peak non-repetitive surge current A 0.8 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 150 °C 500 V Peak non-repetitive blocking voltage Pw=100 μs ©2016 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/11/16 Teccor® brand Thyristors 40 Amp High Temperature Low Tq SCR Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Test Conditions IGT VD = 12V; RL = 30 Ω VGT HS4040xAQ HS4040xAQ2 HS4040xAQ3 MAX. 35 45 65 MIN. 15 30 38 75 95 MAX. Unit mA 1.5 V IGT VD = 12V; RL = 30Ω; TJ = -40°C MAX. 160 mA dv/dt VD = VDRM; gate open; TJ = 150°C MIN. 550 V/μs VGD VD = VDRM; RL = 3.3 kΩ; TJ = 150°C MIN. 0.2 V IH IT = 400mA (initial) MAX. 70 120 200 mA tq IT=0.5A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs MAX. 15 12 5 μs tgt IG = 2 x IGT; PW = 15µs; IT = 80A 3.5 μs HS4040xAQ3 Unit 1.8 V TYP. 3.0 Static Characteristics Symbol Test Conditions VTM IT = 80A; tp = 380μs IDRM / IRRM VDRM / VRRM HS4040xAQ MAX. HS4040xAQ2 1.6 TJ = 25°C 10 TJ = 125°C 2000 MAX. TJ = 150°C μA 4000 Thermal Resistances Symbol Rθ(J-C) Parameter Value Unit Junction to case (AC) 0.6 °C/W Figure 1: Normalized DC Holding Current vs. Junction Temperature Figure 2: N  ormalized DC Gate Trigger Current vs. Junction Temperature 3.0 2.5 2.0 HS4040xQ/xQ2 1.5 1.0 HS4040xQ3 0.5 0.0 -40 HS4040xAQx Series S4040xQx Series -15 10 35 60 85 110 135 150 Junction Temperature (T J) – (ºC) Ratio of IGT / IGT (TJ = 25ºC) Ratio of IH / IH (TJ = 25ºC) 3.0 2.5 2.0 HS4040xQ3 1.5 1.0 HS4040xQ/xQ2 0.5 0.0 -40 -15 10 35 60 85 110 135 150 Junction Temperature (T J) – (ºC) ©2016 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/11/16 Teccor® brand Thyristors 40 Amp High Temperature Low Tq SCR Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature Figure 4: O  n-State Current vs. On-State Voltage (Typical) 90 HS4040xQ3 1.2 Postitive or Negative Instantaneous On-State Current (IT) - Amps Ratio of VGT / VGT (TJ = 25ºC) 1.4 1.0 HS4040xQ/xQ2 0.8 0.6 0.4 0.2 0.0 -40 -15 60 HS4040xQ/xQ2 50 HS4040xQ3 40 30 20 10 0 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Postitive or Negative Instantaneous On-State Voltage (VT) - Volts Figure 6: M  aximum Allowable Case Temperature vs. RMS On-State Current 50 150 45 145 40 140 Maximum Allowable Case Temperature (TC )- °C Average On - State Power Dissipation [PD(AV) ] - (Watts) 70 10 35 60 85 110 135 150 Junction Temperature (T J) – (ºC) Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 35 30 HS4040xQ3 25 20 HS4040xQ/xQ2 15 10 135 130 125 120 115 110 105 100 5 0 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 95 0 5 10 15 20 25 30 35 90 40 0 5 10 15 20 25 30 35 40 45 50 RMS On-State Current [IT(RMS)] - Amps RMS On - State Current [I T(RMS)] -(Amps) Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current Figure 8: Peak Capacitor Discharge Current 150 10000 Peak Discharge Current (ITM) - Amps Maximum Allowable Case Temperature (TC) - °C 145 140 135 130 125 120 115 110 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 105 5 10 tW 15 20 Average On-State Current [IT(AVE)] - Amps HS4040xAQx Series S4040xQx Series ITRM 100 100 0 1000 25 0.5 1.0 10.0 50.0 Pulse Current Duration (tw) - ms ©2016 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/11/16 Teccor® brand Thyristors 40 Amp High Temperature Low Tq SCR Figure 9: Peak Capacitor Discharge Current Derating 1.2 Normalized Peak Current 1.0 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125 150 Case Temperature (TC) - °C Figure 10: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. G  ate control may be lost during and immediately following surge current interval. 2. O  verload may not be repeated until junction temperature has returned to steady-state rated value. 100 10 1 10 100 1000 Surge Current Duration -- Full Cycles Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C HS4040xAQx Series S4040xQx Series tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 Ramp-do Ramp-down tS time to peak temperature Time ©2016 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/11/16 Teccor® brand Thyristors 40 Amp High Temperature Low Tq SCR Physical Specifications Environmental Specifications Test Terminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification V-0 Lead Material Copper Alloy Specifications and Conditions AC Blocking Biased Temperature & Humidity Temperature Cycling Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 150°C for 1008 hours EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity JESD22 A-104 Appendix 6 -55°C to 150°C, 15-minute dwell, 1000 cycles Intermittent Operational Life TA=25C, ΔTJ ≥ 100°C, 1008hrs Autoclave (Pressure Cooker Test) EIA/JEDEC: JESD22-A102 121°C, 100%RH, 15psig, 96hours Resistance to Solder Heat JESD22 A-111: 260°C, 10 seconds Solderability ANSI/J-STD-002, category 3, Test A Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 O A E Dimension 8.13 .320 P ANODE A B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K J N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). HS4040xAQx Series S4040xQx Series Inches Millimeters Min Max Min Max 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 ©2016 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/11/16 Teccor® brand Thyristors 40 Amp High Temperature Low Tq SCR Dimensions – TO- 263 (N-package) — D2-Pak Surface Mount TC MEASURING POINT B Dimension E ANODE 8.41 .331 7.01 .276 A S W U K GATE CATHODE G J H D 8.13 .320 F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 Inches AREA: 0.11 in 2 C V 1.40 .055 3.81 .150 Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.63 0.89 E 0.048 0.055 1.22 1.40 F 0.060 0.075 1.52 1.91 G 0.095 0.105 2.41 2.67 H 0.083 0.093 2.11 2.36 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.87 V 0.035 0.045 0.89 1.14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1.02 1.78 2.03 .080 6.60 .260 Part Numbering System HS4040 R A Q Part Marking System 56 TO-220 AB - (R Package) TO-263 (N Package) Lead Form Dimensions xx: Lead Form Option DEVICE TYPE HS: SCR VOLTAGE RATING 40: 400V TURN-OFF TIME [blank]: 15μs 2: 12μs 3: 5μs CURRENT RATING 40: 40A HS4040RAQ3 YM LOW TURN OFF TIME TYPE ® PACKAGE TYPE R: TO-220 (Non-isolated) N: TO-263 (D 2 - Pak) AEC-Q101 Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code HS4040xAQx Series S4040xQx Series ©2016 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/11/16 Teccor® brand Thyristors 40 Amp High Temperature Low Tq SCR Product Selector Part Number Voltage 400V Gate Sensitivity Type Package 15-35 Standard SCR TO-220AB HS4040RAQ X HS4040NAQ X 15-35 Standard SCR TO-263 HS4040RAQ2 X 30-45 Standard SCR TO-220AB HS4040NAQ2 X 30-45 Standard SCR TO-263 HS4040RAQ3 X 38-65 Standard SCR TO-220AB HS4040NAQ3 X 38-65 Standard SCR TO-263 Packing Options Part Number Marking Weight Packing Mode Base Quantity HS4040RAQTP HS4040RAQ 2.2g Tube 500 (50 per tube) HS4040RAQ2TP HS4040RAQ2 2.2g Tube 500 (50 per tube) HS4040RAQ3TP HS4040RAQ3 2.2g Tube 500 (50 per tube) HS4040NAQRP HS4040NAQ 1.6g Embossed Carrier 500 HS4040NAQ2RP HS4040NAQ2 1.6g Embossed Carrier 500 HS4040NAQ3RP HS4040NAQ3 1.6g Embossed Carrier 500 Reel Pack (RP) for TO-263 Embossed Carrier Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) Gate 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Cathode * * Cover tape Anode 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed HS4040xAQx Series S4040xQx Series ©2016 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/11/16