MBRB10100CT

Schottky Barrier Rectifier MBRB10100CT 2x 5A, 100V, TO-263 Common Cathode MBRB10100CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features Pin out • H  igh junction temperature capability Heat sink Heat sink Common Cathode 1 Anode 3 Anode Pinout 1 D2-PAK & D-PAK Common Cathode 3 2 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Applications 1 2 • • C  ommon cathode configuration in surface mount TO-263 package 3 Anode Common Anode  witching Cathode S mode power • DC/DC converters supply • Polarity protection diodes • Free-wheeling Pinoutdiodes 3 ITO-220AB Common Cathode Maximum Ratings Parameters Peak Inverse Voltage Average • High frequency operation • G  uard ring for enhanced ruggedness and long term reliability Common Cathode 1 • Low forward voltage drop Cathode Common Cathode Forward Anode 1 3 2 Peak One Cycle Non-Repetitive Surge Current (per leg) Pinout 4 Heat sinkTest Conditions Symbol Max Unit - 100 V 50% duty cycle @TC = 105°C, rectangular wave form 5 (per leg) Cathode VRWM IF(AV) IFSM ITO-220AB Common Anode Cathode 1 10 (total device) Anode 120 8.3ms,half Sine pulse 2 A A Pinout 5 TO-220AC Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Symbol Test Conditions Max VF1 @ 5A, Pulse, TJ = 25 °C 0.85 VF2 @ 5A, Pulse, TJ = 125 °C 0.75 Unit V Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1.0 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 15 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 300 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH 10,000 V/μs Voltage Rate of Change * Pulse Width < 300μs, Duty Cycle