SJ6006VTP

Thyristors 6 Amp High Temperature Sensitive & Standard SCRs SJxx06xSx & SJxx06xx Series RoHS Description This SJxx06xx high temperature SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive discharge ignitions. These SCRs have a low gate current trigger level of 6mA or 15mA maximum at approximately 1.5V, with a sensitive version of this series having a gate trigger current less than 200µA. Features & Benefits Main Features Symbol IT(RMS) VDRM /VRRM IGT Value Unit 6 A 400 or 600 V 0.2 to 15 mA Schematic Symbol A • Voltage capability up to 600V • 150°C maximum junction temperature • Surge capability up to 100A at 60Hz half cycle • Halogen free and RoHS compliant Applications Typical applications includes capacitive discharge system for motorcycle engine CDI, portable generator engine ignition, strobe lights and nailers, as well as generic rectifiers, battery voltage regulators and converters. Also controls for power tools, home/brown goods and white goods appliances. K G SJxx06xSx & SJxx06xx Series ©2017 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/08/17 Thyristors 6 Amp High Temperature Sensitive & Standard SCRs Absolute Maximum Ratings — Sensitive SCRs Parameter Test Conditions Value Unit IT(RMS) Symbol RMS on-state current TC = 120°C 6 A IT(AV) Average on-state current TC = 120°C 3.84 A single half cycle; f = 50Hz; TJ (initial) = 25°C 83 single half cycle; f = 60Hz; TJ (initial) = 25°C 100 ITSM Peak non-repetitive surge current I2t I2t Value for fusing tp = 8.3ms 41 A2s Critical rate of rise of on-state current f = 60Hz, TJ = 150°C 70 A/μs Peak gate current Pw=20μs, TJ = 150°C 0.5 A Average gate power dissipation TJ = 150 °C 0.1 W -40 to 150 °C di/dt IGM PG(AV) Storage temperature range Tstg TJ -40 to 150 °C Pw=100μs VDRM/VRRM+100 V Parameter Test Conditions Value Unit IT(RMS) RMS on-state current TC = 125°C 6 A IT(AV) Average on-state current TC = 125°C 3.84 A ITSM Peak non-repetitive surge current single half cycle; f = 50Hz; TJ (initial) = 25°C single half cycle; f = 60Hz; TJ (initial) = 25°C I2t I2t Value for fusing tp = 8.3 ms 41 A2s Critical rate-of-rise of on-state current f = 60Hz TJ = 150°C 100 A/μs Peak gate current Pw=20μs, TJ = 150°C 0.5 A Average gate power dissipation TJ = 150°C 0.1 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 150 °C VDRM/VRRM+100 V VDSM/VRSM Operating junction temperature range A Peak non-repetitive blocking voltage Absolute Maximum Ratings — Standard SCRs Symbol di/dt IGM PG(AV) Tstg TJ VDSM/VRSM Peak non-repetitive blocking voltage Pw=100μs 83 A 100 Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs Symbol IGT VGT dv/dt VGD Value Test Conditions VD = 6V, RL = 100Ω VD = VDRM; RGK = 220Ω ; TJ = 125°C SJxx06xS2 Unit MIN. 20 μA MAX. 200 μA MAX. 0.8 V MIN. 15 V/μs VD = VDRM; RL = 3.3kΩ; TJ = 125°C MIN. 0.2 V VD = VDRM; RL = 3.3kΩ; TJ = 150°C MIN. 0.1 V VGRM IGR = 10μA MIN. 6 V IH IT = 20mA (initial) MAX. 6 mA MAX. 130 μs TYP. 6 μs tq tgt tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs IG = 2 x IGT; PW = 15µs; IT = 8A NOTE: xx = voltage SJxx06xSx & SJxx06xx Series ©2017 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/31/17 Thyristors 6 Amp High Temperature Sensitive & Standard SCRs Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs Symbol Value Test Conditions IGT SJxx06x1 VD = 12V RL = 60Ω VGT VD = VDRM; gate open; TJ = 125°C dv/dt VGD IH Unit MAX. 6 15 mA MAX. 1.5 1.5 V 100 200 50 120 MIN. VD = VDRM; gate open; TJ = 150°C SJxx06x VD = VDRM; RL = 3.3kΩ; TJ = 125°C MIN. 0.2 0.2 VD = VDRM; RL = 3.3kΩ; TJ = 150°C MIN. 0.1 0.1 V/μs V IT = 200mA (initial) MAX. 20 30 mA tq IT=0.5A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs MAX. 30 35 μs tgt IG = 2 x IGT; PW = 15µs; IT = 8A TYP. 0.5 2 μs Value Unit 1.6 V NOTE: xx = voltage Static Characteristics Symbol Test Conditions IT = 12A; tp = 380 µs VTM SJxx06xS2 IDRM / IRRM @ VDRM / VRRM MAX. TJ = 25°C 400 - 600V 5 TJ = 125°C, RGK = 220Ω 400 - 600V 1000 TJ = 150°C, RGK = 220Ω 400 - 600V TJ = 25°C 400 - 600V TJ = 125°C 400 - 600V 1000 TJ = 150°C 400 - 600V 3000 SJxx06xx 3000 MAX. μA 10 Thermal Resistances Symbol Parameter Junction to case (AC) Rθ(J-C) Value SJxx06xS2 1.2 SJxx06xx 1.2 Unit °C/W Note: xx = voltage Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature (Sensitive SCR) Figure 2: N  ormalized DC Gate Trigger Current vs. Junction Temperature (Standard SCR) 1.8 1.6 Ratio of IGT / IGT (TJ = 25°C) Ratio of IGT / IGT (TJ = 25°C) 1.8 RGK=1K 1.4 1.2 1 RGK=220Ω 0.8 0.6 1.6 1.4 1.2 1 0.8 0.6 0.4 0.4 0.2 0.2 0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) -- (°C) SJxx06xSx & SJxx06xx Series 135 150 0 -40 -15 10 35 60 85 110 135 150 Junction Temperature (TJ) -- (°C) ©2017 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/02/17 Thyristors 6 Amp High Temperature Sensitive & Standard SCRs Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature Figure 4: N  ormalized DC Holding Current vs. Junction Temperature 2.5 SJxx08xS2 SJxx06xS2 1.2 Ratio of I H / I H (TJ = 25°C) Ratio of VGT / VGT (TJ = 25°C) 1.4 1 SJxx08xx SJxx06xx 0.8 0.6 0.4 SJxx06xS2 SJxx08xS2 2 1.5 1 SJxx06xx SJxx08xx 0.5 0.2 0 0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) -- (°C) 135 150 Average On-State Power Dissipation [P D(AV)] - (Watts) Intantaneous On-state Current (IT ) – Amps 30 SJxx08xx SJxx06xx 20 SJxx08DS2 SJxx06xS2 10 5 0 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 0 0 Maximum Allowable Case Temperature (TC )- °C Maximum Allowable Case Temperature (TC )- °C 130 SJxx06xS2 110 100 90 RMS On-State Current [IT SJxx06xSx & SJxx06xx Series 4 (RMS)] 5 - (Amps) 4 6 Figure 8: M  aximum Allowable Case Temperature vs. Average On-State Current SJxx06xx 3 2 RMS On-State Current [I T(RMS)] - (Amps) 150 2 135 150 SJxx06xx 150 1 110 2 160 0 85 SJxx06xS2 160 80 60 4 1.7 Figure 7: Maximum Allowable Case Temperature vs. RMS On-State Current 120 35 6 Instantaneous On-state Voltage (VT ) – Volts 140 10 Figure 6: P  ower Dissipation (Typical) vs. RMS On-State Current 35 15 -15 Junction Temperature (TJ) -- (°C) Figure 5: On-State Current vs. On-State Voltage (Typical) 25 -40 6 SJxx06xx 140 130 SJxx06xS2 120 110 100 90 80 0 1 2 3 4 Average On -State Current [AV ] - (Amps) ©2017 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/31/17 Thyristors 6 Amp High Temperature Sensitive & Standard SCRs Figure 9: Peak Capacitor Discharge Current Peak Discharge Current (ITM) - Amps 1000 100 ITRM tW 10 0.5 10.0 1.0 50.0 Pulse Current Duration (tW) - ms Figure 10: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. G  ate control may be lost during and immediately following surge current interval. 2. O  verload may not be repeated until junction temperature has returned to steady-state rated value. 100 10 1 1 10 100 1000 Surge Current Duration -- Full Cycles Figure 11: Typical DC Gate Trigger Current with RGK vs. Junction Temperature (Sensitive SCR) Figure 12: Typical DC Holding Current with RGK vs. Junction Temperature (Sensitive SCR) 10 RGK=100Ω 10 RGK=220Ω RGK=100Ω RGK=470Ω 1 RGK=1KΩ 0.1 0.01 IH (mA) IGT (mA) RGK=220Ω RGK=470Ω 1 No RGK -40 -20 0 20 40 60 No RGK 80 100 120 140 Junction Temperature (T ) -- (°C) SJxx06xSx & SJxx06xx Series 0.1 -40 -20 0 20 40 60 RGK=1KΩ 80 100 120 140 Junction Temperature (T ) -- (°C) ©2017 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/31/17 Thyristors 6 Amp High Temperature Sensitive & Standard SCRs Figure 13: Typical Static dv/dt with RGK vs. Junction Temperature (Sensitive SCR) 10000 Static dv/dt (V/μs) 1000 RGK=100Ω RGK=220Ω 100 RGK=470Ω 10 1 RGK=1KΩ 25 45 65 85 105 Junction Temperature (T ) -- (°C) 125 Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C SJxx06xSx & SJxx06xx Series tP TP Temperature Reflow Condition Ramp-up TL tL TS(max) Preheat TS(min) 25 Ramp-do Ramp-down tS time to peak temperature Time ©2017 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/31/17 Thyristors 6 Amp High Temperature Sensitive & Standard SCRs Physical Specifications Terminal Finish Environmental Specifications Test 100% Matte Tin-plated Specifications and Conditions Body Material UL Recognized epoxy meeting flammability rating V-0 AC Blocking Lead Material Copper Alloy Temperature Cycling Temperature/ Humidity MIL-STD-750, M-1040, Cond A Applied Peak AC voltage for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 160V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C Design Considerations High Temp Storage Careful selection of the correct component for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the component rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E Moisture Sensitivity Level Level 1, JEDEC-J-STD-020 Product Selector Part Number Voltage Gate Sensitivity Type Package X 0.2mA Sensitive SCR TO-251 X 0.2mA Sensitive SCR TO-252 X X 15mA Standard SCR TO-251 X X 15mA Standard SCR TO-252 SJxx06V1 X X 6mA Standard SCR TO-251 SJxx06D1 X X 6mA Standard SCR TO-252 400V 600V SJxx06VS2 X SJxx06DS2 X SJxx06V SJxx06D Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity SJxx06DS2TP SJxx06DS2 0.3 g Tube 750 (75 per tube) SJxx06DS2RP SJxx06DS2 0.3 g Embossed Carrier 2500 SJxx06VS2TP SJxx06VS2 0.4 g Tube 750 (75 per tube) SJxx06DTP SJxx06D 0.3 g Tube 750 (75 per tube) SJxx06DRP SJxx06D 0.3 g Embossed Carrier 2500 SJxx06VTP SJxx06V 0.4 g Tube 750 (75 per tube) SJxx06D1TP SJxx06D1 0.3 g Tube 750 (75 per tube) SJxx06D1RP SJxx06D1 0.3 g Embossed Carrier 2500 SJxx06V1TP SJxx06V1 0.4 g Tube 750 (75 per tube) Note: xx = Voltage SJxx06xSx & SJxx06xx Series ©2017 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/31/17 Thyristors 6 Amp High Temperature Sensitive & Standard SCRs Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole TC MEASURING POINT E Anode H D AREA: 0.040 IN2 Dimension 5.28 .208 J A 5.34 .210 B R P Q S K C Cathode L F Anode GATE G I Inches Min Typ Millimeters Max Min Typ Max A 0.037 0.040 0.043 0.94 1.01 1.09 B 0.235 0.242 0.245 5.97 6.15 6.22 C 0.350 0.361 0.375 8.89 9.18 9.53 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.66 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.34 2.41 I 0.176 0.180 0.184 4.47 4.57 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.035 0.037 0.039 0.90 0.95 1.00 L 0.018 0.020 0.023 0.46 0.52 0.58 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 R 0.034 0.039 0.044 0.86 1.00 1.11 S 0.074 0.079 0.084 1.86 2.00 2.11 Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount Anode E D 6.71 .264 5.28 .208 TC MEASURING POINT Dimension 6.71 .264 B C P Q Cathode GATE F Anode 1.60 .063 1.80 .071 AREA : 0.040 IN 2 3 .118 G I O L K M N SJxx06xSx & SJxx06xx Series J H 4.60 .181 Millimeters Min Typ Max Min Typ Max A 0.037 0.040 0.043 0.94 1.01 1.09 B 0.235 0.243 0.245 5.97 6.16 6.22 C 0.106 0.108 0.113 2.69 2.74 2.87 A 5.34 .210 Inches D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.65 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.33 2.41 I 0.176 0.179 0.184 4.47 4.55 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.035 0.037 0.039 0.90 0.95 1.00 L 0.018 0.020 0.023 0.46 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 N 0.021 0.026 0.027 0.53 0.67 0.69 O 0° 0° 5° 0° 0° 5° P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 ©2017 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/31/17 Thyristors 6 Amp High Temperature Sensitive & Standard SCRs TO-252 Embossed Carrier Reel Pack (RP) Specifications * Cover tape 0.512 (13.0) Arbor Hole Dia. 0.315 (8.0) 0.059 Dia (1.5) Cathode XXXXXX XXXXXX * DC 0.524 (13.3) DC 0.63 (16.0) XXXXXX Gate XXXXXX 0.157 (4.0) DC Meets all EIA-481-2 Standards Anode 12.99 (330.0) Dimensions are in inches (and millimeters). 0.64 (16.3) Direction of Feed Part Numbering System Part Marking System SJ 60 06 D S2 COMPONENT TYPE SJ : SCR VOLTAGE RATING 40 : 400V 60 : 600V CURRENT 06: 6A SENSITIVITY & TYPE Sensitive SCR: S2: 0.2mA Standard SCR: 1: 6mA (blank): 15mA PACKAGE TYPE V : TO-251 (VPAK) D : TO-252 (DPAK) SJxx06DS2 YMLDD ® Date Code Marking Y:Year Code M: Month Code L: Location Code DD: Calendar Code Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimier-electronics. SJxx06xSx & SJxx06xx Series ©2017 Littelfuse, Inc Specifications are subject to change without notice. Revised: 07/31/17