FH23-39S-0.3SHW

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors FH 23 Series qStaggered termination configuration. Only 1.25 mm above the board. Leadless type Completely enclosed bottom surface Lead type 1.25mm sFeatures 1. FPC low insertion force and high holding force Hirose Electric's unique low insertion force (LIF) design (patents pending) improves the Flexible Printed Circuit (FPC) holding force after insertion. FPC insertion force:Reduced approximately 36% (as compared with FH18 Series connectors). FPC holding force:Improvement of approximately 22% (as compared with FH18 Series connectors). 2. Temporary hold of FPC There is no need to hold the FPC after insertion in the connector. The connector will hold it in correct position, allowing closing of the actuator. When the actuator is opened 3. Easy board mounting The surface mounted termination of the contacts is staggered on 0.6 mm centers, positioned on front and back of the connector. Bottom of the connector is completely insulated, allowing conductive traces on PCB to run under the connector. 4. Proven Flip-lock Actuator assures easy and reliable operation Rotating actuator permits easy insertion and reliable connection with the FPC. Tactile sensation confirms complete mechanical locking of the actuator and the electrical connection. 5. Variations to suit different mounting areas Available with lead and leadless type of terminations (for opposing FPC insertion side). 6. Designed for placement with automatic equipment Flat top surface allows pick-up with vacuum nozzles. Packaged in embossed tape, on reel. One reel contains 2,500 pieces. Temporary hold of FPC 7. Accepts 0.2mm thick FPC 8. Variety of contact positions Available with 15,17,21,23,25,27,31,33,39,45,51,61and 71 pos. 8. Environmental considerations Plating is lead-free in order to protect environment. sApplications Mobile phones, PDA’s, digital cameras, digital video cameras and other compact devices requiring interconnections of the main circuit with the LCD, plasma display (PDP), camera module, or other devices. When the actuator is closed 2004.6 1 sProduct Specifications Current rating Ratings Voltage rating 30 V AC 0.3 A DC Operating temperature range -55 ç to +85ç (Note 1) Operating humidity range Relative humidity 90% max. (No condensation) Storage temperature range -10ç to +50ç (Note 2) Storage humidity range Relative humidity 90% max. Recommended FPC Item Thickness: = 0.2±0.03mm Tin-lead plating (Note 3) Specification 100 V DC 90 V AC/one minute 1 mA AC 10 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3 axis. Acceleration of 981 m/s 2 , 6ms duration, sine half-wave waveform, 3 cycles, 3 axis. Conditions 1. Insulation resistance 50 M ohms min. 2. Withstanding voltage No flashover or insulation breakdown 3. Contact resistance 100 m ohms max. *Including FPC/FFC conductor resistance Contact resistance: 100 m ohms max. 4. Durability 4. (insertion/ withdrawal) No damage, cracks, or parts dislocation. 5. Vibration No electrical discontinuity of 1 µs or more. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. No electrical discontinuity of 1 µs. min. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. Insulation resistance: 50 M ohms min. No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. Insulation resistance: 50 M ohms min. No damage, cracks, or parts looseness. 6. Shock 7. Humidity (Steady state) 96 hours at temperature of 40°C and humidity of 90% to 95% Temperature:-55ç/+15ç to +35ç/+85ç/+15ç to +35ç Time: 30/ 2 to 3 / 30 / 2 to 3 (Minutes) 5 cycles Reflow: At the recommended temperature profile Manual soldering: 350 ç±5 ç for 5 seconds 8. Temperature cycle 9. Resistance to soldering heat No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification. sMaterials Part Insulator Contacts Material LCP LCP Phosphor bronze Color:Beige Color:Black Tin-lead plating (Note 3) UL94V-0 --------------Finish Remarks sOrdering information FH23 1 1 Series name : FH23 2 No. of contacts. - 39S - 0.3 SHW (05) 2 3 4 5 4 Terminal type SHW: SMT horizontal mounting type, lead type termination. SHAW: SMT horizontal mounting type, lead-less type termination. Number of contacts : 15,17,21,23,25,27,31,33,39,45,51,61,71 3 Contact pitch: 0.3 mm 5 Plating specifications : (05) (51) : Gold plating : Tin-lead plating 2 BConnector Dimensions (Lead Type termination) A 0.3 0.6 B 1.7 (0.15) 2.45 0.6 Number of contacts indicator C (0.12) 0.05MAX. E 4.15 0.5 (2.84) 1.25(Including contact terminal leads) 0.05MAX. 0.1MAX. 1 2 (D: FPC insertion area dimensions) 1 2 0.1MAX. 0.55 Notes 1 The coplanarity of each terminal lead is within 0.1. 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. Lead Type Part Number FH23-15S-0.3SHW(51) FH23-17S-0.3SHW(51) FH23-21S-0.3SHW(51) FH23-23S-0.3SHW(51) FH23-25S-0.3SHW(51) FH23-27S-0.3SHW(51) FH23-31S-0.3SHW(51) FH23-33S-0.3SHW(51) FH23-39S-0.3SHW(51) FH23-45S-0.3SHW(51) FH23-51S-0.3SHW(51) FH23-61S-0.3SHW(51) FH23-71S-0.3SHW(51) CL No. 586-1317-0-51 586-1300-7-51 586-1314-1-51 586-1324-5-51 586-1322-0-51 586-1308-9-51 586-1302-2-51 586-1304-8-51 586-1306-3-51 586-1318-2-51 586-1312-6-51 586-1310-0-51 586-1320-4-51 Number of Contacts 15 17 21 23 25 27 31 33 39 45 51 61 71 A 17.0 17.6 18.8 19.4 10.0 10.6 11.8 12.4 14.2 16.0 17.8 20.8 23.8 B 13.6 14.2 15.4 16.0 16.6 17.2 18.4 19.0 10.8 12.6 14.4 17.4 20.4 C 14.2 14.8 16.0 16.6 17.2 17.8 19.0 19.6 11.4 13.2 15.0 18.0 21.0 Unit: mm D 14.83 15.43 16.63 17.23 17.83 18.43 19.63 10.23 12.03 13.83 15.63 18.63 21.63 Note: Embossed tape reel packaging(2,500 pieces/reel) Order by number of reels. 3 sConnector Dimensions Diagram (Leadless Type termination) A 0.3 0.6 B 1.7 (0.15) 2.45 ** 0.6 Number of contacts indicator C (0.12) 0.05MAX. 0.1MAX. 1 2 E 0.55 4.15 (2.84) 1.25 (Including contact terminal leads) 0.05MAX. 0.1MAX. 1 2 (D: FPC insertion area dimensions) Notes 1 The coplanarity of each terminal lead is within 0.1. 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. Leadless Type Part Number FH23-15S-0.3SHAW(51) FH23-17S-0.3SHAW(51) FH23-21S-0.3SHAW(51) FH23-23S-0.3SHAW(51) FH23-25S-0.3SHAW(51) FH23-27S-0.3SHAW(51) FH23-31S-0.3SHAW(51) FH23-33S-0.3SHAW(51) FH23-39S-0.3SHAW(51) FH23-45S-0.3SHAW(51) FH23-51S-0.3SHAW(51) FH23-61S-0.3SHAW(51) FH23-71S-0.3SHAW(51) CL No. 586-1316-7-51 586-1301-0-51 586-1315-4-51 586-1325-8-51 586-1323-2-51 586-1309-1-51 586-1303-5-51 586-1305-0-51 586-1307-6-51 586-1319-5-51 586-1313-9-51 586-1311-3-51 586-1321-7-51 Number of Contacts 15 17 21 23 25 27 31 33 39 45 51 61 71 A 17.0 17.6 18.8 19.4 10.0 10.6 11.8 12.4 14.2 16.0 17.8 20.8 23.8 B 13.6 14.2 15.4 16.0 16.6 17.2 18.4 19.0 10.8 12.6 14.4 17.4 20.4 C 14.2 14.8 16.0 16.6 17.2 17.8 19.0 19.6 11.4 13.2 15.0 18.0 21.0 Unit: mm D 14.83 15.43 16.63 17.23 17.83 18.43 19.63 10.23 12.03 13.83 15.63 18.63 21.63 Note: Embossed tape reel packaging(2,500 pieces/reel) Order by number of reels. 4 BRecommended PCB Land and Metal Mask Dimensions (Lead Type) 0.7±0.05 B±0.05 (0.1) (5.2) 0.6±0.05 0.3±0.05 (Land) 0.25±0.05 (Metal mask) 3.45±0.05 (5.4) 0.3±0.05 1.25±0.05 Recommended metal mask thickness: t = 0.1 mm 0.25±0.05 (Metal mask) C±0.05 (0.1) 0.6±0.05 0.3±0.05 (Land) Lead Type Part Number FH23-15S-0.3SHW(51) FH23-17S-0.3SHW(51) FH23-21S-0.3SHW(51) FH23-23S-0.3SHW(51) FH23-25S-0.3SHW(51) FH23-27S-0.3SHW(51) FH23-31S-0.3SHW(51) CL No. 586-1317-0-51 586-1300-7-51 586-1314-1-51 586-1324-5-51 586-1322-0-51 586-1308-9-51 586-1302-2-51 Number of Contacts 15 17 21 23 25 27 31 B C G Part Number FH23-33S-0.3SHW(51) FH23-39S-0.3SHW(51) FH23-45S-0.3SHW(51) FH23-51S-0.3SHW(51) FH23-61S-0.3SHW(51) FH23-71S-0.3SHW(51) CL No. 586-1304-8-51 586-1306-3-51 586-1318-2-51 586-1312-6-51 586-1310-0-51 586-1320-4-51 Number of Contacts 33 39 45 51 61 71 B 03.6 04.2 04.8 04.2 04.8 05.4 05.4 06.0 06.6 06.0 06.6 07.2 06.6 07.2 07.8 07.2 07.8 08.4 08.4 09.0 09.6 Unit: mm C G 09.0 09.6 10.2 10.8 11.4 12.0 12.6 13.2 13.8 14.4 15.0 15.6 17.4 18.0 18.6 20.4 21.0 21.6 BRecommended Land and Metal Mask Dimensions (Leadless Type) B±0.05 0.65±0.05 ( 0.1 ) (4.6) 0.6±0.05 0.3±0.05(Land) 0.25±0.05(Metal mask) 2.9±0.05 0.3±0.05 (4.8) 1.25±0.05 Recommended metal mask thickness: t = 0.1 mm 0.6±0.05 0.3±0.05(Land) 0.25±0.05(Metal mask) C±0.05 (0.1) Leadless Type Part Number CL No. Number of Contacts 15 17 21 23 25 27 31 B C G Part Number CL No. Number of Contacts 33 39 45 51 61 71 B FH23-15S-0.3SHAW(51) 586-1316-7-51 FH23-17S-0.3SHAW(51) 586-1301-0-51 FH23-21S-0.3SHAW(51) 586-1315-4-51 FH23-23S-0.3SHAW(51) 586-1325-8-51 FH23-25S-0.3SHAW(51) 586-1323-2-51 FH23-27S-0.3SHAW(51) 586-1309-1-51 FH23-31S-0.3SHAW(51) 586-1303-5-51 03.6 04.2 04.8 04.2 04.8 05.4 05.4 06.0 06.6 06.0 06.6 07.2 06.6 07.2 07.8 07.2 07.8 08.4 08.4 09.0 09.6 FH23-33S-0.3SHAW(51) 586-1305-0-51 FH23-39S-0.3SHAW(51) 586-1307-6-51 FH23-45S-0.3SHAW(51) 586-1319-5-51 FH23-51S-0.3SHAW(51) 586-1313-9-51 FH23-61S-0.3SHAW(51) 586-1311-3-51 FH23-71S-0.3SHAW(51) 586-1321-7-51 Unit: mm C G 09.0 09.6 10.2 10.8 11.4 12.0 12.6 13.2 13.8 14.4 15.0 15.6 17.4 18.0 18.6 20.4 21.0 21.6 5 BRecommended FPC Dimensions G±0.05 0.3 ±0.07 0.6 ±0.02 1.3 ±0.15 1.1 ±0.15 0.3 ±0.15 ( 0.2 ) ( 0.1 ) C±0.03 0.3±0.07 4 0.3 +0.04 -0.03 0.4 2R0 .2 +0.04 -0.03 (0.07) 0.2±0.03 3.5 ±0.3 (Area with removed covering layer film) 2.8 ±0.15 (0.2) (0.05) 0.6±0.02 (0.1 between conductors) (0.2 conductor width) 0.3±0.02 B±0.03 0.6±0.07 4 5 0.3 +0.04 - 0.03 also permitted when drawing plated leads. Polyamide and thermally hardening adhesive is recommended as the materials for the stiffener. BPackaging Specification qEmbossed Carrier Tape Dimensions(Tape width of 24 mm max.) 1.75±0.1 4±0.1 2±0.15 12±0.1 + 0 0 .1 (0.5) (2) (1.7) (0.3) Ø1 .5 (M) (N) K±0.1 (0.85) (5.1) (0.5) (2.45) Flat surface for placement with Automatic equipment Unreeling direction H±0.3 (L) Unit: mm Part Number CL No. Number of Contacts 15 15 17 17 21 21 23 23 25 25 27 27 H 16 16 16 16 16 16 24 24 24 24 24 24 K L M N Q Part Number CL No. Number of Contacts 31 31 33 33 39 39 45 45 51 51 H 24 24 24 24 24 24 24 24 24 24 K L M N Q FH23-15S-0.3SHW(51) 586-1317-0-51 FH23-15S-0.3SHAW(51) 586-1316-7-51 FH23-17S-0.3SHW(51) 586-1300-7-51 FH23-17S-0.3SHAW(51) 586-1301-0-51 FH23-21S-0.3SHW(51) 586-1314-1-51 FH23-21S-0.3SHAW(51) 586-1315-4-51 FH23-23S-0.3SHW(51) 586-1324-5-51 FH23-23S-0.3SHAW(51) 586-1325-8-51 FH23-25S-0.3SHW(51) 586-1322-0-51 FH23-25S-0.3SHAW(51) 586-1323-2-51 FH23-27S-0.3SHW(51) 586-1308-9-51 FH23-27S-0.3SHAW(51) 586-1309-1-51 07.5 07.3 05.1 04.5 16.5 07.5 07.3 05.1 04.5 16.5 07.5 07.9 05.7 05.1 16.5 07.5 07.9 05.7 05.1 16.5 07.5 09.1 06.9 06.3 16.5 07.5 09.1 06.9 06.3 16.5 11.5 09.7 07.5 06.9 24.5 11.5 09.7 07.5 06.9 24.5 11.5 10.3 08.1 07.5 24.5 11.5 10.3 08.1 07.5 24.5 11.5 10.9 08.7 08.1 24.5 11.5 10.9 08.7 08.1 24.5 FH23-31S-0.3SHW(51) 586-1302-2-51 FH23-31S-0.3SHAW(51) 586-1303-5-51 FH23-33S-0.3SHW(51) 586-1304-8-51 FH23-33S-0.3SHAW(51) 586-1305-0-51 FH23-39S-0.3SHW(51) 586-1306-3-51 FH23-39S-0.3SHAW(51) 586-1307-6-51 FH23-45S-0.3SHW(51) 586-1318-2-51 FH23-45S-0.3SHAW(51) 586-1319-5-51 FH23-51S-0.3SHW(51) 586-1312-6-51 FH23-51S-0.3SHAW(51) 586-1313-9-51 11.5 12.1 09.9 09.3 24.5 11.5 12.1 09.9 09.3 24.5 11.5 12.7 10.5 09.9 24.5 11.5 12.7 10.5 09.9 24.5 11.5 14.5 12.3 11.7 24.5 11.5 14.5 12.3 11.7 24.5 11.5 16.3 14.1 13.5 24.5 11.5 16.3 14.1 13.5 24.5 11.5 18.1 15.9 15.3 24.5 11.5 18.1 15.9 15.3 24.5 6 qEmbossed Carrier Tape Dimensions(Tape width of 32 mm min.) 1.75±0.1 4±0.1 2±0.15 12±0.1 +0 0 .1 (1.7) (0.3) Ø1. 5 (M) (N) (L) K±0.1 1.5 +0.1 0 1.7 +0.15 0 Unreeling direction (0.85) (5.1) (0.5) Flat surface for placement with Automatic equipment (2.45) H±0.3 J±0.1 Unit: mm Part Number FH23-61S-0.3SHW(51) FH23-61S-0.3SHAW(51) FH23-71S-0.3SHW(51) FH23-71S-0.3SHAW(51) CL No. 586-1310-0-51 586-1311-3-51 586-1320-4-51 586-1321-7-51 Number of Contacts 61 H 32 J 28.4 K 14.2 L 21.1 M 18.9 N 18.3 Q 32.5 71 44 40.4 20.2 24.1 21.9 21.3 44.5 qReel Dimensions (2) (Q) (Ø1 3) (Ø380) End portion Mounting portion Lead portion (400 mm min.) Blank portion (10 pockets min.) Embossed carrier tape (Ø80) Blank portion (10 pockets min.) Top cover tape 7 BRecommended Temperature Profile qUsing Typical Solder Paste 5 sec. Max. 250 240ç Temperature 200 200ç 150 160ç 150ç (ç) 100 50 25ç(60 sec.) 0 Start 60 Preheating 120 Time (Seconds) Soldering 60 sec. to 90 sec. (30 sec.) (20 sec. to 30 sec.) HRS test conditions Solder method :Reflow, IR/hot air (Nihon Den-netsu Co., Ltd.’s Part Number: SENSBY NR-2) Environment :Room air Solder composition :Paste, 63%Sn/37%Pb (Senju Metal Industry, Co., Ltd.’s Part Number: OZ63-201C-50-9) Test board :Glass epoxy 45mm∞100mm∞1.6mm thick Land dimensions :Lead type 0.3mm∞1.25mm, 0.3mm∞0.7mm Leadless type 0.3mm∞1.25mm, 0.3mm∞0.65mm Metal mask :Lead type 0.25mm∞1.25mm∞0.1mm thick 0.25mm∞0.7mm∞0.1mm thick Leadless type 0.25mm∞1.25mm∞0.1mm thick 0.25mm∞0.65mm∞0.1mm thick This temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. qUsing Lead-free Solder paste Max. 250ç 250 230ç 200 200ç HRS test condition Solder method Temperature Environment Solder composition 150 150ç (ç) 100 Test board Land dimensions 50 25ç (60 sec.) 90 sec. to 120 sec. 0 Start 60 Preheating 120 Time (Seconds) Soldering (60 sec.) Metal mask :Reflow, IR/hot air (Nihon Den-netsu Co., Ltd.’s Part Number: SENSBY NR-2) :Room air :Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.’s Part Number: M705-221CM5-42-10.5) :Glass epoxy 45mm∞100mm∞1.6mm thick : Lead type 0.3mm∞1.25mm, 0.3mm∞0.7mm Leadless type 0.3mm∞1.25mm, 0.3mm∞0.65mm : Lead type 0.25mm∞1.25mm∞0.1mm thick 0.25mm∞0.7mm∞0.1mm thick Leadless type 0.25mm∞1.25mm∞0.1mm thick 0.25mm∞0.65mm∞0.1mm thick In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult tour solder paste and equipment manufacturer for specific recommendations. 8 BFH23 Series FPC Construction (Recommended Specifications) 1. Using Single-sided FPC Material Name Covering film layer. Cover adhesive Surface treatment Copper foil Base adhesive Base film Polyamide 1 mil thick Tin-lead plating Cu 1oz Material Polyamide 1 mil thick. Thickness (µm) 25 25 5 35 25 25 30 75 195 Reinforcement material adhesive Heat-hardened adhesive Stiffener Polyamide Total 3 mil thick 2. Using Double-sided FPC Material Name Covering layer film Cover adhesive Surface treatment Through-hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Polyamide 1 mil thick Cu 1/2oz Polyamide 1 mil thick Tin-lead plating Cu Cu 1/2oz Material Polyamide 1 mil thick Thickness (µm) 25 25 5 15 18 18 25 18 18 25 25 25 25 199 Reinforcement material adhesive Heat-hardened adhesive Stiffener Polyamide Total 1 mil thick 3. Precautions Note : Recommended specification for FPC 0.2±0.03 mm thick. FPC/FFC Manufactures' Contact List Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division 5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan Fujikura Ltd. Electronics Global Marketing Department 1-5-1, Kiba, Koto-ku, Tokyo, Japan NOK Corporation Sales Division Overseas Business Department 1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan TEL:+81 3 5462 4191 FAX:+81 3 5462 4882 TEL:+81 3 5606 1165 FAX:+81 3 5606 1530 TEL:+81 3 3432 6976/8415 FAX:+81 3 3432 3919 9 BConnector Operating Instructions, precautions and recommendations Operation Precautions 1) Do not apply excessive force or use any type of tool to operate the actuator. 1.FPC Termination procedure. Connector installed on the board. 1) Lift up the actuator. Use thumb or index finger. 2) Rotate down the actuator until firmly closed. NOTE: The FPC must be fully inserted in the connector. If not fully inserted, the actuator will not close properly. Should this be the case, lift up the actuator (per Step 2 below) and repeat the process (starting with Step 1 above) 2) The connector will assure reliable performance when the actuator is open to 90° maximum (see fig.1) Do not exceed this angle, as this may cause permanent damage to the connector. 90ç 3) For connectors with multiple contacts, such as 39 and 61 pos. rotate down the actuator pushing at both ends. 3) Assure that the FPC is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. 2.FPC Removal 1) Lift up the actuator. 2) Carefully remove the FPC. FPC conductor surface 10