HIF3E-60PA-2.54DSA

Ribbon Cable Connector (Pin Header) HIF3E Series sFeatures 1. Product Variation The straight type connector is connected vertical to the printed board, and the right angle type connector is connected horizontal to the printed board. 2. Compatibility This pin header is compatible with HIF3B series. sApplications Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc. sProduct Specifications Rating Current rating: 1A Voltage rating: 200V AC Specification 1000M ohms min. 500V DC 650V AC/1 minute 0.1A Operating Temperature Range:–55 to +85ç (Note 1) Operating Moisture Range:40 to 80% Storage Temperature Range:–10 to +60ç (Note 2) Storage Humidity Range:40 to 70% (Note 2) Condition Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Vibration No flashover or insulation breakdown. 15m ohms max. No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (–55ç: 30 minutes ➝15 to 35ç: 5 minutes max. 125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles 500 cycles 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 6. Temperature Cycle No damage, cracks, or parts looseness. 7. Durability (Mating/un-mating) Contact resistance: 15m ohms max. 8. Resistance to Soldering heat No deformation of components affecting performance. Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. sMaterial Part Insulator Contact Material PBT Brass Finish Black selective gold plating Remarks UL94V-0 --------------- sOrdering Information HIF3E 1 1 Series Name: HIF 3E - * P A - 2.54 DS 2 3 4 5 6 5 Contact Pitch: 2.54mm 6 Contact type DSS: Right angle type DSA: Straight type 2 Number of contacts: 8, 10, 12, 16, 18, 20, 26, 30, 34, 40, 50, 60 3 P: Pin header 4 A: Selective gold plating B53 sRight Angle Pin Header Unit: mm Part Number CL No. Number of Contacts 10 12 16 18 20 26 30 34 40 50 60 A 13.7 16.24 21.3 23.86 26.4 34.0 39.1 44.2 51.8 64.5 77.2 B 10.16 12.7 17.78 20.32 22.86 30.48 35.56 40.64 48.26 60.96 73.66 HIF3E-10PA-2.54DS 614-0041-0 HIF3E-12PA-2.54DS 614-0050-0 HIF3E-16PA-2.54DS 614-0042-2 HIF3E-18PA-2.54DS 614-0051-3 HIF3E-20PA-2.54DS 614-0043-5 HIF3E-26PA-2.54DS 614-0044-8 HIF3E-30PA-2.54DS 614-0045-0 HIF3E-34PA-2.54DS 614-0046-3 HIF3E-40PA-2.54DS 614-0047-6 HIF3E-50PA-2.54DS 614-0048-9 HIF3E-60PA-2.54DS 614-0049-1 sDip Pin Header Unit: mm Part Number CL No. Number of Contacts 8 10 12 16 18 20 26 30 34 40 50 60 A 11.2 13.7 16.24 21.3 23.86 26.4 34.0 39.1 44.2 51.8 64.5 77.2 B 7.62 10.16 12.7 17.78 20.32 22.86 30.48 35.56 40.64 48.26 60.96 73.66 HIF3E- 8PA-2.54DSA 614-0072-3 HIF3E-10PA-2.54DSA 614-0061-7 HIF3E-12PA-2.54DSA 614-0070-8 HIF3E-16PA-2.54DSA 614-0062-0 HIF3E-18PA-2.54DSA 614-0071-0 HIF3E-20PA-2.54DSA 614-0063-2 HIF3E-26PA-2.54DSA 614-0064-5 HIF3E-30PA-2.54DSA 614-0065-8 HIF3E-34PA-2.54DSA 614-0066-0 HIF3E-40PA-2.54DSA 614-0067-3 HIF3E-50PA-2.54DSA 614-0068-6 HIF3E-60PA-2.54DSA 614-0069-9 B54