3030 Series M16 [5/8 in] High Output VRS Sensors
For speed sensing applications where higher
output voltages are needed. Performs best at low
to medium speeds with medium to high
impedance loads.
Optimum Actuator: 20 DP (Module 1.27) Ferrous Metal Gear
Test Condition: A
VP/P
Specifications
> Literature
Parameter
Value
> 3010 Series General
Purpose VRS Sensors
Output Voltage
190V P-P min.
Coil Resistance
191 Ohm to 1200 Ohms
> 3015 Series General
Purpose VRS Sensors
Pole Piece Diameter
2,69 mm [0.106 in]
Minimum Surface Speed
10 IPS (0.25 m/Sec.) Typical
Operating Temperature Range
-55 °C to 120 °C [-67 °F to 250 °F]
Inductance
450 mH max.
Gear Pitch Range
24 DP (Module 1.06) or Coarser
Maximum Operating Frequency
15 KHz Typical
Vibration
Meets Mil-Std 202F Method 204D
> 30X9 Series High
Resolution VRS
Sensors
> 304X Series High
Resolution VRS
Sensors
> 30X4 Series High
Resolution VRS
Sensors
Sensors with 5/8-18 UNF-2A Mounting Thread*, MS3106
Connector
> 3070/3090 Series
Explosion Proof VRS
Sensors
> 2015/2025/2030/2040
Series Molded VRS
Sensors
> 3040 Series Power
Output VRS Sensors
Dimensions
Part Number
Thread Length
Weight
3030AN
28 mm [1.1 in]
70 g [2.5 oz]
3030AN25
63 mm [2.5 in]
84 g [3.0 oz]
3030AN30
76 mm [3.0 in]
84 g [3.0 oz]
3030AN40
101 mm [4.0 in]
98 g [3.5 oz]
3030AN50
127 mm [5.0 in]
128 g [4.5 oz]
Mates with 41010(VR) Connector or CA210 Cable Assembly.
* For M16 x 1.5 6g Mounting Thread Versions, add “M” as the first character of
the model number.
Sensors with 5/8-18 UNF-2A Mounting Thread*, 24" (300 mm)
Leads
Dimensions
Part Number
Thread Length
Weight
3030S20
50 mm [2.0 in]
70 g [2.5 oz]
3030S30
76 mm [3.0 in]
84 g [3.0 oz]
* For M16 x 1.5 6g Mounting Thread Versions, add “M” as the first character of
the model number.
> 3080 Series Sub
Miniature VRS Sensor
Sensors with 5/8-18 UNF-2A Mounting Thread*, 1/2-14 NPT
Conduit Mount, 300 mm [24 in] Leads
> 3015HTB Series High
Temperature VRS
Sensors
> Download VRS
Calculator
Dimensions
Part Number
Thread Length
Weight
3030H20
50 mm [2.0 in]
140 g [5.0 oz]
* For M16 x 1.5 6g Mounting Thread Versions, add “M” as the first character of
the model number.
Sensors with 5/8-18 UNF-2A Mounting Thread*, MS3106
Connector, 7,9 mm [0.312 in] Thread Relief
Dimensions
Part Number
Thread Length
Weight
3030A
1.4" (35 mm)
2.5 oz. (70 gr.)
3030A25
2.5" (63 mm)
3.0 oz. (84 gr.)
Mates with 41010(VR) Connector or CA210 Cable Assembly.
* For M16 x 1.5 6g Mounting Thread Versions, add “M” as the first character of
the model number.
很抱歉,暂时无法提供与“3030AN”相匹配的价格&库存,您可以联系我们找货
免费人工找货