400APS12P

THIS DRAWING IS A CONTROLLED DOCUMENT. LOC REVISIONS DIST - - P LTR DESCRIPTION A B REVISED PER ECR-14-007824 ECO-15-015144: ADD UL. SAFETY ORGANIZATIONS 20 LINE CURRENT/VOLTAGE: 400 A, 690VAC LINE FREQUENCY: 50-60 Hz NOMINAL LEAKAGE CURRENT: MAXIMUM LEAKAGE CURRENT: 20 mA 390mA 09NOV2015 -40°C TO +85°C 21 DAYS @ 40°C 95% RH. TEST SPECIFICATIONS INDUCTANCE, NOMINAL: 50.9 µH CAPACITANCE AT 1KHz, 0.25 VAC MAX., 25°C±1°C LINE TO GROUND, NOMINAL: LINE TO LINE, NOMINAL: 3.1 µF 7.0 µF DISCHARGE RESISTOR L/G AND L/L I.R. 1000 kOhm / 1000 kOhm IR (NO DISCHARGE RESISTOR) 20°C, 50% RH AND 100VDC, MIN: 6000 M ^ RECOMMENDED RECEIVING INSPECTION HIPOT @ 400V, 50HZ IN AN AMBIENT, T , HIGHER THAN 50°C, THE MAXIMUM OPERATING CURRENT, I , IS AS FOLLOWS: I = I RELEASED FOR PUBLICATION LINE TO GROUND FOR 1 MINUTE: 2640 VDC LINE TO LINE FOR 1 MINUTE: 2520 VDC FILTER APPROVAL: 100 - T O R THE BEST WAY TO SELECT AND QUALIFY A FILTER IS FOR YOUR ENGINEERING TO TEST THE UNIT IN YOUR EQUIPMENT. Q 50 100.00 80.00 32.50 LOAD 12.00 230.0 6.00 ALL RIGHTS RESERVED. EC EC RS EC 02JUNE2014 STORAGE TEMPERATURE: HUMIDITY: OPERATING AMBIENT TEMPERATURE RANGE @ RATED CURRENT, I : -10°C TO +50°C 255.0 LINE 205.0 64.0 40.0 245.0 38.5 10.50 12 * 25.00 39.0 120.0 BY - 40.0 25.0 * DO NOT LOOSEN INNER GROUND NUTS. TORQUE OUTER GROUND NUTS TO: 25-30 NM [220-260 IN-LB] 20 TYPICAL INSERTION LOSS COPYRIGHT COMMON MODE 50/50 ^ ;DIFFERENTIAL MODE 100/100 ^ C THIS DRAWING IS UNPUBLISHED. APVD RELIABILITY SPECIFICATIONS THIS FILTER HAS BEEN FORMALLY RECOGNIZED, CERTIFIED OR APPROVED BY THE LISTED AGENCY. THEREFORE, ALL TEST/REQUIREMENTS SPECIFIED IN THE LATEST REVISION OF THE FOLLOWING AGENCY STANDARDS HAVE BEEN MET: UL OPERATING SPECIFICATIONS DWN DATE DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: 2 1.0 0.50 0.200 0.0001 09NOV2015 CHK 17DEC2013 APVD 17DEC2013 EC mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN EC EC PRODUCT SPEC - - Customer Drawing 0.05 0.15 0.5 1.0 3.0 5.0 CM 13 33 62 88 78 68 DM 27 40 53 68 58 45 FINISH 10 30 52 36 20 40 32 21 TE Connectivity NAME SIZE - 0.01 - APPLICATION SPEC WEIGHT 1469-35 (3/11) MATERIAL MHz CAGE CODE A4 00779 400APS12P 3-PHASE DELTA FILTER DRAWING NO 5-1609114-0 SCALE 1:1 SHEET RESTRICTED TO 1 OF - 1 REV B