4515-DS5B002DP

MS4515 SPECIFICATIONS    Pressure Ranges from 2 to 30 inches H2O  Differential & Gage  . PCB Mounted Pressure Transducers  Amplified Ratiometric Analog Output Temperature Compensated 3.3V or 5.0 VDC Supply Voltage FEATURES     Inches H2O Pressure Ranges PCB Mountable High Level Analog Output Barbed Pressure Ports APPLICATIONS        Blocked Filter Detection Altitude and Airspeed Measurements Medical Instruments Fire Suppression System Panel Meter Air Movement/Environmental Controls Pneumatic Controls SENSOR SOLUTIONS /// MS4515 The MS4515 is a small, ceramic based, PCB mounted pressure transducer from TE Connectivity. The transducer is built using the latest CMOS sensor conditioning circuitry to create a low cost, high performance transducer designed to meet the strictest requirements from OEM customers. The MS4515 is fully calibrated and temperature compensated with a total error band (TEB) of less than 1.0% over the compensated range. The sensor operates from single supply of either 3.3 or 5.0VDC and requires a single external component for proper operation. The rugged ceramic transducer is available in side port, top port, and manifold mount versions and can measure gage or differential pressure from 2 to 30 inches H2O. The 1/8” barbed pressure ports mate securely with 3/32” ID tubing. 04/2019 Page 1 MS4515 STANDARD RANGES (INCHES H2O) Range 2 4 5 10 20 30 Gage DS, SS, TP, MM DS, SS, TP, MM DS, SS, TP, MM DS, SS, TP, MM DS, SS, TP, MM Differential DS, SS, TP, MM DS, SS, TP, MM DS, SS, TP, MM DS, SS, TP, MM DS, SS, TP, MM DS, SS, TP, MM Option Availability -F -F -F See Package Configurations: DS= Dual Side Port, SS= Single Side Port, TP= Top Port, MM= Manifold Mount Pin Style “L” is only available SS and MM port types. Pin Style “C” is only available SS, TP and MM port types. BLOCK DIAGRAM SENSOR SOLUTIONS /// MS4515 04/2019 Page 2 MS4515 ABSOLUTE MAXIMUM RATINGS Parameter Supply Voltage Output Current Load Resistance (RL) Storage Temperature Humidity Overpressure Burst Pressure ESD Solder Temperature Conditions TA = 25 °C TA = 25°C TA = 25°C Min 2.7 Max 5.5 3 Unit V mA kΩ °C %RH psi psi kV 10 -40 +125 95 Not to Exceed 300 TA = 25°C TA = 25 °C, both Ports TA = 25 °C, Port 1 HBM -4 +4 250°C, 5 sec max. Notes Non Condensing See Table 1 EN 61000-4-2 TABLE 1- BURST PRESSURE BY RANGE AND PACKAGE STYLE Style DS, MM Port SS, TP Port 1 Port 2 Port 1 002 10 10 004 10 10 10 005 10 10 10 010 10 10 10 020 10 10 10 030 20 20 20 Unit PSI PSI PSI ENVIRONMENTAL SPECIFICATIONS Parameter Mechanical Shock Mechanical Vibration Thermal Shock Life MTTF SENSOR SOLUTIONS /// MS4515 Conditions Mil Spec 202F, Method 213B, Condition C, 3 Drops Mil Spec 202F, Method 214A, Condition 1E, 1Hr Each Axis 100 Cycles over Storage Temperature, 30 minute dwell 1 Million FS Cycles >10Yrs, 70 ºC, 1.188 Million Pressure Cycles, 120%FS Pressure 04/2019 Page 3 MS4515 PERFORMANCE SPECIFICATIONS Supply Voltage1: 5.0V or 3.3 VDC Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS Output MAX UNITS 0.500 MIN TYP 4.500 V 0.250 4.75 V NOTES 1,2,3 Accuracy -0.25 0.25 %Span 2 Total Error Band (TEB) -1.0 1.0 %Span 3,5 TEB (4inH2O and Below) -2.0 2.0 %Span 3,5 mA 5 4 Supply Current 3 Compensated Temperature 0 +60 ºC Operating Temperature -10 +85 ºC Response Time 1 Start time to data ready Weight Media ms 6 3 5 ms grams Non-Corrosive Dry Gases Compatible with Ceramic, Silicon, Borosilicate Glass, RTV, Gold, Aluminum and Epoxy. See “Wetted Material by Port Designation” chart below. Notes 1. Proper operation requires an external capacitor placed as shown in Connection Diagram. Output is ratiometric to supply voltage variations of less than 10%. 2. Accuracy: The maximum deviation from a best fit straight line (BFSL) fitted to the output measured over the pressure range at 25°C. Includes all errors due to pressure non linearity, hysteresis, and non-repeatability. 3. Total error band includes all accuracy errors, thermal errors over the compensated temperature range, and span and offset calibration tolerances. For ideal sensor output with respect to input pressure, reference Pressure Transfer Function charts below. TEB values are valid only at the calibrated supply voltage. 4. For errors beyond the compensated temperature range, see Extended Temperature Multiplier chart below. 5. This product can be configured for custom OEM requirements, contact factory for lower power consumption or higher accuracy. CONNECTION DIAGRAM Notes 1. Place 100nF capacitor between Supply and GND to within 2 cm of sensor. SENSOR SOLUTIONS /// MS4515 04/2019 Page 4 MS4515 PRESSURE AND TEMPERATURE TRANSFER FUNCTION Sensor Output at Significant Percentages, (Vs=5.00) OUTPUT (%Vs) 0 5 10 50 90 95 100 Output Type A (inH20) PMIN-(PMAX-PMIN)*10/80 Output Type B (inH20) PMIN-(PMAX-PMIN)*5/90 PMIN PMIN PMAX PMAX+(PMAX-PMIN)*10/80 PMAX PMAX+(PMAX-PMIN)*5/90 Voltage (V) 0.000 0.250 0.500 2.500 4.500 4.750 5.000 Sensor Output at Significant Percentages, (Vs=3.30) Output (%Vs) 0 5 10 50 90 95 100 SENSOR SOLUTIONS /// MS4515 Output A ( inH20) PMIN-(PMAX-PMIN)*10/80 Output B ( inH20) PMIN-(PMAX-PMIN)*5/90 PMIN PMIN PMAX PMAX+(PMAX-PMIN)*10/80 PMAX PMAX+(PMAX-PMIN)*5/90 04/2019 Voltage (V) 0.000 0.165 0.330 1.650 2.970 3.315 3.300 Page 5 MS4515 EXTENDED TEMPERATURE MULTIPLIER CHART 2.5 2.0 1.5 1.0 0.5 0.0 -10 0 10 20 30 40 50 60 70 80 90 PACKAGE, PINOUT & PRESSURE TYPE CONFIGURATION SENSOR SOLUTIONS /// MS4515 04/2019 Page 6 MS4515 Prange is equal to the maximum full scale pressure specified in the ordering information. Pin Name SUPPLY OUTPUT GND Pin 2 3 4 1, 5-8 Function Positive Supply Voltage Analog Output Ground No Connection Pressure Type Differential/ Bidirectional Pmin -Prange Pmax +Prange Gage 0psiG +Prange Description Output is proportional to the difference between Port 1 and Port 2. Output swings positive when Port 1> Port 2. Output is 50% of supply voltage when Port 1=Port 2 Output is proportional to the difference between 0psiG (P min) and Port 1. Output swings positive when Port 1> Port 2. WETTED MATERIAL BY PORT DESIGNATION Style DS, MM SS, TP,SM Port Port 1 Port 2 Port 1 Ceramic X X X Silicon X X X Material Borosilicate Glass X X X RTV X X X Gold Aluminum X X X X Epoxy X X X "X" Indicates Wetted Material SENSOR SOLUTIONS /// MS4515 04/2019 Page 7 MS4515 DIMENSIONS (are in INCHES [mm]) Model: MS4515-DSvoxxxyP Model: MS4515-DSvoxxxyS SENSOR SOLUTIONS /// MS4515 04/2019 Page 8 MS4515 Model: MS4515-SSvoxxxyP Model: MS4515-SSvoxxxyS SENSOR SOLUTIONS /// MS4515 04/2019 Page 9 MS4515 Model: MS4515-TPvoxxxyP Model: MS4515-TPvoxxxyS SENSOR SOLUTIONS /// MS4515 04/2019 Page 10 MS4515 Model: MS4515-SSvoxxxyL Model: MS4515-MMvoxxxyL SENSOR SOLUTIONS /// MS4515 04/2019 Page 11 MS4515 Model: MS4515-MMvoxxxyP Model: MS4515-MMvoxxxyS SENSOR SOLUTIONS /// MS4515 04/2019 Page 12 MS4515 Model: MS4515-SSvoxxxyC Model: MS4515-TPvoxxxyC SENSOR SOLUTIONS /// MS4515 04/2019 Page 13 MS4515 Model: MS4515-MMvoxxxyC AVAILABLE OPTIONS Gel Coat (-F Option) The MS4515 is designed for non-ionic and clean dry air applications. Select this option for added protection in high humidity or slightly corrosive environments with the application of a silicone gel elastomer to sensor and ASIC. For questions concerning media compatibility, contact the factory. SENSOR SOLUTIONS /// MS4515 04/2019 Page 14 MS4515 ORDERING INFORMATION 4515 – DS 3 A 030 D P F Electrical Single Sideport SS Dual Sideport DS Top Port TP MM Manifold Mount Option Type [Blank] No Option F* Gel Coating *Options available for pressure ranges ≥10inH2O Supply Voltage 3 3.3 VDC 5 5.0 VDC Fitting Type P Thru Hole S J Lead L In Line C Castellation Output Type 10% - 90% A 5% to 95% B Pressure Type Pressure Range [inH2O] D Differential 002 004 005 010 020 030 G Gauge NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity company Tel: 800-522-6752 Email: customercare.frmt@te.com Measurement Specialties (Europe), Ltd., a TE Connectivity Company Tel: 800-440-5100 Email: customercare.bevx@te.com Measurement Specialties (China) Ltd., a TE Connectivity company Tel: 0400-820-6015 Email: customercare.shzn@te.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies SENSOR SOLUTIONS /// MS4515 All Rights Reserved. 04/2019 Page 15