CF2714-000

SCD SPECIFICATION CONTROL DRAWING Title 55PC0112 Date WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, LIGHTWEIGHT, GENERAL PURPOSE, 600 VOLT Revision 5-14-15 F This specification sheet forms a part of the latest issue of Raychem Specification 55PC. CONDUCTOR - SILVER-COATED COPPER INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE CONSTRUCTION DETAILS WIRE SIZE (AWG) CONDUCTOR STRANDING (number x AWG) 55PC0112-26-* 26 55PC0112-24-* 24 55PC0112-22-* PART NUMBER 1/ FINISHED WIRE CONDUCTOR DIAMETER (inch) DIAMETER MAXIMUM (inch) RESISTANCE AT 20°C UPPER LOWER TARGET UPPER SPEC LIMIT (ohms/1000 ft.) SPEC LIMIT VALUE SPEC LIMIT LOWER SPEC LIMIT TARGET VALUE 19 x 38 .0175 .0183 .0191 38.4 .0291 .0305 19 x 36 .0225 .0233 .0241 24.3 .0341 .0355 22 19 x 34 .0285 .0293 .0301 15.1 .0401 55PC0112-20-* 20 19 x 32 .0365 .0375 .0385 9.19 55PC0112-18-* 18 19 x 30 .0452 .0464 .0476 5.79 55PC0112-16-* 16 19 x 29 .0514 .0527 .0538 55PC0112-14-* 14 19 x 27 .0644 .0659 55PC0112-12-* 12 37 x 28 .0825 .0845 55PC0112-10-* 10 37 x 26 .1050 55PC0112-8-* 8 133 x 29 55PC0112-6-* 6 133 x 27 WEIGHT (lbs/1000 ft.) TARGET VALUE UPPER SPEC LIMIT .0319 1.23 1.34 .0369 1.81 1.93 .0415 .0429 2.69 2.83 .0481 .0495 .0509 4.11 4.27 .0573 .0590 .0607 6.27 6.56 4.52 .0646 .0665 .0684 8.01 8.33 .0674 2.88 .0789 .0810 .0831 12.39 12.81 .0865 1.90 .0974 .1000 .1026 19.17 19.71 .1070 .1090 1.19 .1220 .1260 .1300 30.68 31.70 .158 .163 .169 .658 .183 .188 .193 57.7 59.9 .198 .205 .212 .418 .225 .234 .243 89.1 94.1 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Page 1 of 2 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297 © 2008-2015 Tyco Electronics Corporation. All rights reserved. Page SPECIFICATION CONTROL DRAWING 2 of 2 Revision SCD F WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level COLOR: White preferred CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour IDENTIFICATION AND COLOR STRIPING DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight INSULATION ELONGATION AND TENSILE STRENGTH: Elongation, 50% (minimum) Tensile Strength, 5000 lbf/in2 (minimum) INSULATION FLAWS: Spark Test, 3.0 kV (rms) Impulse Dielectric Test, 8.0 kV (peak) INSULATION THICKNESS: 0.006 in. (nominal) SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 inch (maximum) in 12 inches VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms) 1/ PART NUMBER: The "*" in the part numbers on page 1 shall be replaced by a color code designator. Example: AWG 22, white: 55PC0112-22-9 AWG 22, white with a black stripe: 55PC0112-22-90 1/ See footer section on page 1 55PC0112