FM200ABXX

KILOVAC High Voltage AC Contactors FM200 (“Flatman III”) Series Contactor 200 Amps, 480 VAC (50/60 Hz), or 48 Vdc, 1-, 2-, or 3-poles Product Facts n Multi-pole configurations n Normally open, normally closed and mixed contact arrangements n Optional quick connect tabs for sensing n Small, lightweight & costeffective – designed to be the smallest, lowest cost contactor in the industry with its current rating n Standard models available with 12VDC, 24VDC and 115 VAC coils. Consult factory for 240VAC coil models. n 1 Form A auxiliary contacts For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. File E208033 Product Specifications Value for FM200 Series Coil Operating Voltage (valid over temperature range) Contact Arrangement 1, 2 or 3 poles Coil Designator Units A B C D Contact Form (per pole) Form X or Y (NO-DM or NC-DB) Nominal Voltage V 12 (DC) 24 (DC) 115 (AC) 24 (DC) Parameter Units Rated Operating Voltage V 480Vrms (L-L) or 48VDC Voltage Range V 9.6-13.2 19.2-26.4 92-126.5 19.2-26.4 Max. Contact Voltage (transient) V 750Vrms or 60VDC Hold Voltage V ≥0.5Vnom ≥0.5Vnom ≥0.5Vnom ≥0.5Vnom Dropout Voltage V ≤0.1Vnom ≤0.1Vnom ≤0.1Vnom ≤0.2Vnom Continuous (Carry) Current Arms or ADC 200/pole (Form X) 150/pole (Form Y) Power Switching Form X (0.7-1.0 PF) Cycles 2,000 @ 300Arms 10,000@ 200Arms 20,000 @ 100Arms 5,000 @ 200A/48VDC 2 million @ 50A/28VDC Power Switching Form Y (0.7-1.0 PF) Cycles 2,000 @ 225Arms 10,000@ 150Arms 20,000 @ 75Arms 5,000 @ 150A/48VDC 2 million @ 35A/28VDC Mechanical Life Cycles >2 million Contact Voltage Drop mV Auxiliary Contact Arrangement Auxiliary Contact Rating Insulation Resistance @ 500VDC 75 for Form X or Form Y 100 G 10 Vibration, sine, 10-2000Hz. G 5 Operating Temperature °C -20 to +60 Ambient Humidity °C %RH A B* C* D* Ohms X = 36 XX = 18 XXX = 12 XY = 13.2 XYX = 9.6 X = 36 XX = 18 XXX = 12 XY = 13.2 XYX = 9.6 X = 36 XX = 18 XXX = 12 XY = 13.2 XYX = 9.6 Y = 20.8 YY = 10.4 YYY = 6.9 YXY = 8.1 Coil Designator A B** Current/Power X = 0.37 ADC / 4.84W XX = 0.73ADC / 9.68W XXX = 1.1ADC / 14.5W XY = 1.0ADC / 13.2W XYX = 1.38ADC / 18.2W X = 0.33ADC / 3.9W XX = 0.65ADC / 7.6W XXX = 0.97ADC / 11.3W XY = 0.98ADC / 12.7W XYX = 1.31ADC / 16.5W 2,200 @ sea level Megohms Storage Temperature Units Resistance ±10% Coil Current/Power Data for Pole Configurations (@25°C, Vcoil=1.1Vnom) 1 Form A (SPST-NO) Vrms Coil Designator *Coil resistance not measurable at terminals due to converter/economizer circuit. Arms or ADC 1 @ 30VDC, 3 @ 125VAC Dielectric Withstanding Voltage Shock, 11ms 1/2 sine, peak Coil Resistance Data for Pole Configurations (@25°C) Coil Designator Current/Power -40 to +85 0 to 95 Weight oz. / kg 17.6 - 49.4 / 0.5 -1.4 See Outline Dimensions for model-specific weight information. C **Average coil current. Available Pole Configurations and Applicable Coil Codes No. of NC Poles (across) 0 1 2 No. of NO Poles (down) 0 Y YY Coil D Coil D 1 X XY YXY Coil A/B/C/E Coil A/B/C/E Coil D 2 XX XYX Coil A/B/C/E Coil A/B/C/E 3 XXX Coil A/B/C/E X = Form X (NO-DM) Y = Form Y (NC-DB) 3 YYY Coil D D*** Pick-Up I / Duration X = 0.067 Arms / 6.8VA Y = 0.13ADC / 3.4W XX = 0.115Arms / 11.6VA YY = 0.23ADC / 6.1W XXX = 0.146Arms / 14.8VA YYY = 0.34ADC / 9.0W XY = 0.074Arms / 7.5VA YXY = 0.28ADC / 7.4W XYX = 0.161Arms / 16.3VA 1.28ADC / 75ms 2.4ADC / 75ms 3.0ADC / 75ms 3.0ADC / 75ms ***Economized. Operate/Release Time (25°C, 0.8Vnom ≤ V < Vnom) Typ. Coil Designator Units A B**** C**** Operate Time ms 25-50 30-50 50-150 D**** 20-30 Release Time ms 10-20 70-80 75-100 75-100 Bounce Time ms 2-5 2-5 2-5 2-5 ****Includes internal coil suppression. 7–34 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com KILOVAC High Voltage AC Contactors FM200 “Flatman III” Series Contactor (Continued) Part Numbering System Typical Part Number FM200 A B XYX Series: FM200 = Multipole, 200 Amp, 480VAC/48VDC Contactor Control Voltage: A = 12VDC Coil, No Suppression B = 24VDC Converter, with Suppression C = 115VAC Converter, with Suppression D = 24VDC Electronic Chopper, with Suppression E = 240VAC Converter, with Suppression - Consult Factory for Availability and Specifications Optional Termination: A = Optional Quick Connect Tabs B = No Optional Terminals Pole Configuration (All models have a 1 Form A (SPST-NO) auxiliary switch): X = 1 Form X (SPST-NO-DM), Available with control voltage codes A, B, C and E XX = 2 Form X (2PST-NO-DM), Available with control voltage codes A, B, C and E XXX = 3 Form X (3PST-NO-DM), Available with control voltage codes A, B, C and E Y = 1 Form Y (SPST-NC-DB), Available only with control voltage code D YY = 2 Form Y (DPST-NC-DB), Available only with control voltage code D YYY = 3 Form Y (3PST-NC-DB), Available only with control voltage code D XY = 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB), Available with control voltage codes A, B, C and E XYX = 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB) + 1 Form X (SPST-NO-DM), Available with control voltage codes A, B, C and E YXY = 1 Form Y (SPST-NC-DB) + 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB), Available only with control voltage code D Outline Dimensions 2.29 (58.2) 1.86 (47.2) OPTIONAL TAB TERMINALS .250 x .032 (6.35 x .813) .40 (10.2) C MAIN TERMINAL WIRE CONNECT VIA M8 BOLT W/LOCK/FLAT 13MM (0.5 IN) HEX HEAD 3.77 (95.8) 2.29 (58.2) 1.93 (49.0) 1.22 (31.0) 4.2 (106.7) A NUMBER OF POLES 1 1.68 (42.7) 2 2.67 (67.7) 3 3.65 (92.7) B 2.14 (54.3) 3.12 (79.3) 4.11 (104.4) C 1.56 (39.6) 2.55 (64.6) 3.53 (89.7) WEIGHT 17.6 oz. (0.5 kg) 35.3 oz. (1.0 kg) 49.4 oz. (1.4 kg) A 3.42 (86.9) 3.77 (95.8) 2.74 (69.6) 2.98 (75.7) 7 KILOVAC High Voltage AC Contactors DIM. RIGHT ANGLE SCREW TERMINAL STRIP ACCEPTS #24 - #14 WIRE .256 DIA. (6.5) B For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. 7–35 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com