HEX40L-AB-00-11-A3-1

REVISION FINISH DES. B LTR DESCRIPTION DATE APPROVED R REVISED PER ECO-15-008666 06/09/15 I. MYONG S REVISED PER RTS 1281814 01/04/17 E. HALEY T REVISED PER RTS 1457196 06/11/19 O. CANO DESCRIPTION CADMIUM PER SAE AMS-QQ-P-416, TYPE II, CLASS 3 OVER APPROPRIATE UNDER PLATE PER SAE AS85049 (500 HOUR SALT SPRAY) 2 COLOR OLIVE DRAB ALUMINUM ALLOYS: ELECTROLESS NICKEL PER SAE AMS-C-26074, CLASS 3 OR CLASS 4, GRADE B C STEEL AND OTHER BASE METALS HEAT TREATABLE TO IMPROVE HARDNESS: ELECTROLESS NICKEL PER SAE AMS-C-26074, CLASS 1, GRADE B BRIGHT D ELECTROLESS NICKEL PER SAE AMS-C-26074, CLASS 3 OR 4, .001 THICK NOMINAL BRIGHT E ANODIZED, HARD, PER MIL-A-8625, TYPE III, CLASS 1 GRAY F ANODIZED, PER MIL-A-8625, TYPE II, CLASS 1 GRAY G ANODIZED, HARD, PER MIL-A-8625, TYPE III, CLASS 2 BLACK H SPECIAL CADMIUM PER SAE AMS-QQ-P-416, TYPE II, CLASS 3 GOLD J PASSIVATED PER SAE AMS-QQ-P-35 OR MIL-S-5002 K ANODIZED, PER MIL-A-8625, TYPE II, CLASS 2 L ALODINE 1200 N SPECIAL CADMIUM PER SAE AMS-QQ-P-416, TYPE II, CLASS 3 OVER APPROPRIATE UNDER PLATE PER SAE AS85049 (500 HOUR SALT SPRAY) -BLACK BRIGHT P CADMIUM PER SAE AMS-QQ-P-416, TYPE II, CLASS 3, SELECTIVELY PLATED OVER ELECTROLESS NICKEL .001 THICK, NOMINAL OLIVE DRAB Q ZINC COBALT, CONTACT TYCO ELECTRONICS OLIVE DRAB R CADMIUM PER SAE-AMS-QQ-P-416, TYPE II, CLASS 3, OVER APPROPRIATE UNDERPLATE PER SAE-AS85049 (500 HOUR SALT SPRAY) OLIVE DRAB FOR USE WITH RAYATEN ONLY. CONTACT TYCO ELECTRONICS © 2019 Tyco Electronics Corporation. All rights reserved. Raychem Adapters SEE SHEET 1 FOR REVISIONS DESCRIPTION FINISH DES. T U 2 DESCRIPTION COLOR BRIGHT TIN PLATE PER ASTM B545 OVER ELECTROLESS NICKEL ZINC COLBALT OVER ELECTROLESS NICKEL OLIVE DRAB BRIGHT V ELECTRO DEPOSITED NICKEL PER SAE AMS-QQ-N-290, CLASS 1, GRADE E W UNPLATED, SHOTBLAST - GLASS BEAD -- X Ni PTFE PER SAE AS85049 (500 HOUR SALT SPRAY) -- Z ZnNi PER ASTM B841 OVER SUITABLE UNDERPLATE & CHROMATE CHEMICAL CONVERSION. BLACK 3 ELECTROLESS NICKEL ON COMPOSITE MATERIAL BRIGHT 4 CADMIUM OVER SUITABLE UNDER-PLATING ON COMPOSITE MATERIAL 5 ZnNi PER ASTM B841 OVER SUITABLE UNDERPLATE & CHROMATE CHEMICAL CONVERSION, Cr ( VI ) FREE. BLACK 6 ZINC COBALT OVER ELECTROLESS NICKEL. BLACK / AS MACHINED, NO PLATING -- # SPECIFICATIONS DEFINING MATERIAL AND FINISHES SPECIAL FINISH - REFER TO CONTROLLING DOCUMENT FOR -- OBSOLETE 1 DESCRIPTION OLIVE DRAB 2 COLOR REPLACE A CADMIUM PER SAE AMS-QQ-P-416, TYPE II, CLASS 3 OLIVE DRAB B M CADMIUM PER SAE AMS-QQ-P-416, TYPE II, CLASS 3 BRIGHT N S SPECIAL CADMIUM PER SAE AMS-QQ-P-416, TYPE II, CLASS 3 OVER ELECTROLESS NICKEL .0005 MIN. THICKNESS OLIVE DRAB B Y SPECIAL ZINC COBALT OVER ELECTROLESS NICKEL TO ASTM B-733, SC2, TYPE I, CLASS 1. OLIVE DRAB U 1. CUSTOMERS ORDERING "OBSOLETE PLATING CODE" WILL RECEIVE PARTS PLATED WITH "REPLACE WITH CODE". UNLESS OTHERWISE SPECIFIED, PARTS WILL BE MARKED AS SPECIFIED ON PURCHASE ORDER. 2. COLORS LISTED ARE FOR REFERENCE COLOR APPEARANCE ONLY. COLOR VARIATION FROM DIFFERENCE BATCHES OR COMPONENTS IS A PART OF THE NORMAL PLATING PROCESS AND SHALL NOT BE A CAUSE FOR REJECTION. (E.G., COLOR BLACK MAY VARY FROM GREENISH BLACK TO BLACK, OLIVE DRAB MAY VARY FROM TANISH GREEN TO DARK GREEN, ETC.) 3. SEE INDIVIDUAL PART NUMBERS FOR COMPLIANCE (E.G., RoHS, REACH, ETC.) Raychem Adapters S-CH00-0157-002 T SEE SHEET 1 FOR REVISIONS DESCRIPTION Raychem Adapters S-CH00-0157-002 N/A T SEE SHEET 1 FOR REVISION DESCRIPTION Raychem Adapters S-CH00-0157-002 N/A T