SG1-120-3

SG1 Cable Actuated Sensor Voltage Divider Output Signal Compact Mid-Range String Pot • Absolute Position 80, 120-inch Stroke Range Options Polycarbonate Enclosure • IP67 In Stock for Quick Delivery Specifications Stroke Range Options 80 inches (2032 mm), 120 inches (3048 mm) Output Signal voltage divider (potentiometric) Accuracy .35% FS. Repeatability .05% FS. Resolution essentially infinite Measuring Cable .019-inch dia. nylon-coated stainless steel Maximum Acceleration 10 g The SG1 provides absolute linear position up to a 10-ft. stroke range. Constructed with a rugged polycarbonate body, this model is available in an 80-inch or 120-inch stroke range and offers optional IP67 protection for wet or outdoor installations and an M12 connector for easy installation. The SG1 uses a precision high-cycle plastic hybrid potentiometer and an extremely durable spring-loaded stainless steel measuring cable to provide an accurate reliable position feedback signal over the entire stroke. With its slim design and versatile mounting bracket, the SG1 has been designed to fit into spaces no other measurement device can. For the OEM customer, custom mounting hardware and electrical connections are available. SENSOR SOLUTIONS /// SG1 12//2015 Measuring Cable Tension 9 oz. (2,5 N) ±30% Sensor plastic-hybrid precision potentiometer Input Resistance 10K ohms, ±10% Power Rating, Watts 2.0 at 70°F Recommended 30 V (AC/DC) Maximum Input Voltage Output Signal Change 94% ±4% of V(+in) Over Full Stroke Range Cycle Life ≥ 250,000 Electrical Connection see ordering information Enclosure glass-filled polycarbonate Environmental IP 50 , IP67 (m12 connector & pigtail options) Operating Temperature -40˚ to 160˚ F (-40˚ to 70˚ C) Weight, 80-inch (not including bracket) .6 lbs. (272 g) Weight, 120-inch (not including bracket) 1 lb. (453 g) Page 1 SG1 Voltage Divider Output Signal Electrical Connection Output Signal Mounting Options (SG1-80, SG1-80-2, SG1-80-3): Mounting Options (SG1-120, SG1-120-2, SG1-120-3): SENSOR SOLUTIONS /// SG1 12//2015 Page 2 SG1 Voltage Divider Output Signal SG1-80 w/o Mounting Bracket: SG1-120 w/o Mounting Bracket: SENSOR SOLUTIONS /// SG1 12//2015 Page 3 SG1 Voltage Divider Output Signal SG1-80 w/ Mounting Bracket: SG1-120 w/ Mounting Bracket: SENSOR SOLUTIONS /// SG1 12//2015 Page 4 SG1 Voltage Divider Output Signal SG1-80-2 w/ Mounting Bracket: SG1-120-2 w/ Mounting Bracket: SENSOR SOLUTIONS /// SG1 12//2015 Page 5 SG1 Voltage Divider Output Signal SG1-80-3 w/ Mounting Bracket: SG1-120-3 w/ Mounting Bracket: SENSOR SOLUTIONS /// SG1 12//2015 Page 6 SG1 Voltage Divider Output Signal Ordering Information NORTH AMERICA Measurement Specialties, Inc., a TE Connectivity company 20630 Plummer Street Chatsworth, CA 91311 Tel +1 800 423 5483 Tel +1 818 701 2750 Fax +1 818 701 2799 info@celesco.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. SG1 12/01/2015 SENSOR SOLUTIONS /// SG1 12//2015 Page 7