SSRK-600A20

SSRK Series Solid State Relays SSRK series 10-30A DIN Mount Solid State Relay With Paired SCR Output, Integral Heatsink File E29244 File LR246041 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to confirm the product meets the requirements for a given application. Features Engineering Data • • • • • • • • Form: 1 Form A (SPST-NO). Duty: Continuous. Isolation: 4,000V rms input-to-output-to-ground. Insulation Resistance: 109 Ohms, minimum, at 500VDC. Capacitance: 8.0 pf maximum (input to output). Temperature Range: Storage: –40°C to +125°C Operating: –40°C to + 80°C Case and Mounting: Refer to outline dimension drawing. Termination: Load & Control: Finger safe (IP20) screw clamps accepting wire size up to #10 AWG (3 mm). Ground: #10 screw with 5/16 in. hex/slottted head. Installation Spacing: Minimum 0.8 in (20 mm) space between units. Approximate Weight: 9.9 oz. (284 g). Narrow (22.5mm), DIN mount design with integral heatsink. Choice of 10, 20 or 30A rms inverse-parallel connected SCR output. 48 - 660VAC output. 4 -32VDC or 90 - 280Vrms input control. 4,000V rms optical isolation. Green LED input status indicator. Finger-safe (IP20) screw clamp terminals for load and control. Ground terminal. Ordering Information Sample Part Number SSRK -600 A 30 1. Basic Series: SSRK = Slim Solid State Relay with Integral Heatsink for DIN Rail Mounting 2. Line Voltage: 600 = 48 - 660 VAC 3. Input Type & Voltage: A = 90 - 280VAC D = 4 - 32VDC 4. Maximum Switching Rating/Output: 10 = 10.0A rms 20 = 20.0A rms 30 = 30.0A rms Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRK-600A10 SSRK-600D10 SSRK-600A20 SSRK-600D20 SSRK-600A30 SSRK-600D30 Input Specifications Parameter Conditions AC Control Units DC Control Units @ 25°C 90 - 280 Vrms 4.0 - 32 VDC 4.0 VDC Must Release Voltage V IN(REL) (Min.) @ 25°C @ 25°C 90 Vrms 10 Vrms 1.0 VDC Input Current Range (Typ.) @ 25°C 2 mA @ 120 Vrms, 4 mA @ 240 Vrms 8 - 12 mA Control Voltage Range V IN Must Operate Voltage VIN(OP) (Min.) Revised 3-10 www.tycoelectronics.com 1 Dimensions are in inches over (millimeters) unless otherwise specified. Dimensions are shown for reference purposes only. Specifications and availability subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208 1 SSRK Series Solid State Relays Output Specifications (@ 25° C, unless otherwise specified) Conditions Units 10A Rated Units 20A Rated Units f = 47-63 Hz. V rms 48-660 48-660 48-660 V peak ±1200 ±1200 ±1200 Load Current Range I L* A rms 0.15 - 10.0 0.15 - 20.0 0.15 - 30.0 Single Cycle Surge Current (Min.) A peak 120 250 625 f = 60 Hz. VL = 600Vrms mA rms 1.0 1.0 1.0 On-State Voltage Drop (Max.) I L = Max. V peak Static dv/dt (Off-State) (Min.) V L = Max. V/µs 1.6 500 1.6 500 500 Turn-On Time (Max.) f = 60 Hz. ms Turn-Off Time (Max.) f = 60 Hz. ms I 2 t Rating (Max.) Load Power Factor Rating (Min,) t = 8.3 ms A2 Sec. Parameter Load Voltage Range VL Repetitive Blocking Voltage (Min.) Leakage Current (Off-State) (Max.) I L = Max. 30A Rated Units 1.6 8.3 for DC Input Models, 10.0 for AC Input Models 8.3 for DC Input Models, 40.0 for AC Input Models 60 260 1,620 0.5 0.5 0.5 *See Thermal Derating Curves. Electrical Characteristics (Thermal Derating Curves) Outline Dimensions MOUNTING HOLE 0.17 (4.3) DIA. 30 25 4/A2 3.5 (88.9) TU 20A Rated Units U S +3/A1 20 INP Ouput Current (Arms) 30A Rated Units T ST A 3.2 (81.9) 15 10 2.6 (66.0) 10A Rated Units OUTPUT 5 1/L1 2/T1 0 0 20 40 60 Ambient Temperature (°C) 80 .5 (12.7) .890 (22.5) MOUNTING SLOT 0.17 x 0.20 (4.3 x 5.1) 3.2 (81.3) 3.9 (99.0) BLACK ANODIZED ALUMINUM HEATSINK Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this document, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Recommended Torque Range for Terminal Screws: 5 - 6 in lb (0.6 - 0.7 Nm). The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult Tyco Electronics for the latest dimensions and design specifications. © 2010 by Tyco Electronics Corporation. All Rights Reserved. TE logo and Tyco Electronics are trademarks. Catalog 8-1773454-4 Revised 3-10 2 www.tycoelectronics.com Dimensions are in inches over (millimeters) unless otherwise specified. Dimensions are shown for reference purposes only. Specifications and availability subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208