10TTS08S

Preliminary Data Sheet I2145 12/97 SAFEIR Series 10TTS08S SURFACE MOUNTABLE PHASE CONTROL SCR Description/Features The 10TTS08S S AFE IR s eries of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125° C junction temperature. Typical applications are in input rectification (soft start) and these products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identical package outlines. VT < 1.15V @ 6.5A ITSM = 140A VRRM = 800V Output Current in Typical Applications Applications NEMA FR-4 or G10 glass fabric-based epoxy with 4 oz (140µm) copper Aluminum IMS, RthCA = 15°C/W Aluminum IMS with heatsink, RthCA = 5°C/W TA = 55°C, TJ = 125°C, footprint 300mm2 Single-phase Bridge 2.5 6.3 14.0 Three-phase Bridge Units 3.5 9.5 18.5 A Major Ratings and Characteristics Characteristics IT(AV) Sinusoidal waveform IRMS VRRM/ VDRM ITSM VT dv/dt di/dt TJ range @ 6.5 A, TJ = 25°C 10 800 140 1.15 150 100 - 40 to 125 A V A V V/µs A/µs °C Package Outline 10TTS08S Units 6.5 A D2 PAK (SMD-220) 1 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Voltage Ratings Part Number 10TTS08S VRRM, maximum peak reverse voltage V 800 VDRM , maximum peak direct voltage V 800 IRRM/IDRM 125°C mA 1.0 Absolute Maximum Ratings Parameters IT(AV) Max. Average On-state Current IT(RMS) Max. RMS On-state Current ITSM Max. Peak One Cycle Non-Repetitive Surge Current It 2 10TTS08S Units 6.5 10 120 140 72 100 As 2 Conditions @ TC = 112° C, 180° conduction half sine wave A A 10ms Sine pulse, rated VRRMapplied,TJ = 125°C 10ms Sine pulse, no voltage reapplied, TJ = 125°C 10ms Sine pulse, rated VRRMapplied,TJ = 125°C 10ms Sine pulse, no voltage reapplied, T J = 125°C Max. I t for fusing 2 I √t 2 Max. I √t for fusing 2 1000 1.15 17.3 0.85 0.05 1.0 30 50 150 100 A √s 2 t = 0.1 to 10ms, no voltage reapplied,TJ = 125°C @ 6.5A, TJ = 25°C TJ = 125°C VTM rt Max. On-state Voltage Drop On-state slope resistance V mΩ V mA VT(TO) Threshold Voltage IRM/IDM Max.Reverse and Direct Leakage Current IH IL Typ. Holding Current Max. Latching Current TJ = 25 °C TJ = 125 °C VR = rated VRRM/ VDRM mA mA V/µs A/µs Anode Supply = 6V, Resistive load, Initial IT =1A Anode Supply = 6V, Resistive load TJ = 25°C dv/dt Max. rate of rise of off-state Voltage di/dt Max. rate of rise of turned-on Current 2 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Triggering Parameters PGM Max. peak Gate Power 10TTS08S Units 8.0 2.0 1.5 10 20 15 10 A V mA W Conditions PG(AV) Max. average Gate Power + IGM Max. paek positive Gate Current - VGM Max. paek negative Gate Voltage IGT Max. required DC Gate Current to trigger Anode supply = 6V, resistive load, TJ = - 65°C Anode supply = 6V, resistive load, TJ = 25°C Anode supply = 6V, resistive load, TJ = 125°C VGT Max. required DC Gate Voltage to trigger 1.2 1 0.7 V Anode supply = 6V, resistive load, TJ = - 65°C Anode supply = 6V, resistive load, TJ = 25°C Anode supply = 6V, resistive load, TJ = 125°C TJ = 125°C, VDRM = rated value VGD IGD Max. DC Gate Voltage not to trigger Max. DC Gate Current not to trigger 0.2 0.1 mA TJ = 125°C, VDRM = rated value Switching Parameters tgt trr tq Typical turn-on time Typical reverse recovery time Typical turn-off time 10TTS08S 0.8 3 100 Units µs TJ = 25°C TJ = 125°C Conditions Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Soldering Temperature RthJC Max. Thermal Resistance Junction to Case RthJA Typ. Thermal Resistance Junction to Ambient (PCB Mount)** wt T Approximate Weight Case Style 2 (0.07) g (oz.) D2 Pak (SMD-220) 10TTS08S Units - 40 to 125 - 40 to 125 240 1.5 40 °C °C °C °C/W °C/W Conditions for 10 seconds (1.6mm from case) DCoperation **When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 3 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 125 10TTS08 R thJC (DC) = 1.5 K/W 120 Conduction Angle 125 10TTS08 R thJC(DC) = 1.5 K/W 120 Conduction Period 115 30° 60° 110 90° 120° 180° 105 0 1 2 3 4 5 6 7 Average On-state Current (A) 115 30° 60° 110 90° 120° 180° 105 0 2 4 6 8 10 12 Average On-state Current (A) DC Fig. 1 - Current Rating Characteristics Maximum Average On-state Power Loss (W) Fig. 2 - Current Rating Characteristics Maximum Average On-state Power Loss (W) 12 10 8 6 RMS Limit 4 2 0 0 2 4 6 8 10 12 Average On-state Current (A) Conduction Period 8 7 6 5 4 3 Conduction Angle 180 ° 120° 90° 60° 30° RMS Limit DC 180° 120° 90° 60° 30° 2 1 0 0 1 2 3 4 5 6 7 Average On-state Current (A) 10TTS08 T J= 125°C 10TTS08 T J = 125°C Fig. 3 - On-state Power Loss Characteristics Peak Half Sine Wave On-state Current (A) At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Fig. 4 - On-state Power Loss Characteristics Peak Half Sine Wave On-state Current (A) 150 140 130 120 110 100 90 80 70 60 50 0.01 10TTS08 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T J= 125°C No Voltage Reapplied Rated V RRM Reapplied 130 120 110 100 90 80 70 60 1 Initial T J= 125°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 10TTS08 10 100 0.1 Pulse Train Duration (s) 1 Number Of Equal Amplitude Half Cycle Current Puls es (N) Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 7 - Maximum Non-Repetitive Surge Current 4 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 1000 Instantaneous On-state Current (A) 10TTS08 100 10 T J= 25°C T J= 125°C 1 0.5 1 1.5 2 2.5 3 3.5 Instantaneous On-stat e Voltage (V) Fig. 7 - On-state Voltage Drop Characteristics Transient Thermal Impedance Z thJC (°C/W) 10 Steady State Value (DC Operation) 1 D D D D = 0.50 = 0.33 = 0.25 = 0.17 0.1 D = 0.08 Single Pulse 10TTS08 0.01 0.0001 0.001 0. 01 Square Wave Pulse Duration (s) 0.1 1 Fig. 8 - Thermal Impedance ZthJC Characteristics 5 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Marking Information EXAMPLE: THIS IS AN 10TTS08S INTERNATIONAL RECTIFIER LOGO (A) PART NUMBER 10TTS08S 9G3A ASSEMBLY LOT CODE 9512 DATE CODE (YYWW) YY = YEAR WW = WEEK (K) (G) Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIRECTION 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 1.75 (0.069) DIA. 1.25 (0.049) 16.10 (0.634) 15.90 (0.626) TRL 24.30 (0.957) 23.90 (0.941) 10.90 (0.429) 10.70 (0.421) 4.72 (0.186) 4.52 (0.178) FEED DIRECTION Dimensions in millimeters and inches 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel When orderi ng, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and T RR. 360 (14.173) DIA. MAX. 60 (2.362) DIA. MIN. 6 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED F OOTPRINT 11.43 (0.45) (K) 1 (G) 3 4.57 (0.18) 8.89 (0.3 5) 1 (K) Cathode 2 (A) Anode 3 (G) Gate 2 4.32 (0.17) 17.78 (0.70) 0.61 (0.02) MAX. 5.08 (0 .20) REF. (A) 3.81 (0.15) 2.08 (0.08) Dimensions in millimeters and inches 2X 2.54 (0 .10) 2X Ordering Information Table Device Code 10 1 1 2 3 4 5 6 7 - T 2 T 3 S 4 08 5 S 6 TRL 7 2 (A) Current Rating, RMS value Circuit Configuration T = Single Thyristor Package T = TO-220AC Type of Silicon S = Converter Grade Voltage code: Code x 100 = VRRM S = TO-220 D2Pak (SMD 220) Version Tape and Reel Option TRL = Left Reel TRR = Right Orientation Reel 1 (K) (G) 3 7 10TTS08S SAFEIR Series Preliminary Data Sheet I2145 12/97 WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 U.S.A Tel: (310) 322-3331 Fax: (310) 322-3332 EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020 Fax: ++ 44 1883 733408 IR CANADA: 7231 Victoria Park Ave., Suite #201, Markham, Ontario L3R 2Z8 Tel: (905) 475 1897. Fax: (905) 475 8801 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 Fax: ++ 49 6172 965933 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 4510111 Fax: ++ 39 11 4510220 IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171 Tel: 81 3 3983 0086 Fax: 81 3 3983 0642 IR SOUTHEAST ASIA: 315 Outram Road, # 10-02 Tan Boon Liat Building, SINGAPORE 0316. Tel: 65 221 8371. Fax: 65 221 8372. http://www.irf.com Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice 12/97 8