MPLCG0530LR47

SMD Inductors Large-Current Power Inductors MPLCG Overview Applications The KEMET MPLCG metal composite inductors are ideal for use in DC to DC switching power supplies. The MPLCG’s small size makes it ideal for applications with tight space requirements. The combination of composite core material and round wire allows these inductors to be used in applications with high switching frequencies and where efficiency is important. • Switching DC-DC power supplies • Notebook computers • Tablets • Embedded computer systems • Servers and storage • HDTVs Benefits • Metal composite powder • Operating temperature up to +125°C • High inductance • Low DCR • Low profile 3 mm maximum • Low core loss • Low acoustic noise Part Number System MPLCG 0530 L R22 Series Size Code Inductor Inductance Code µH MPLCG 0530 0630 R = decimal point Examples: R22 = 0.22 µH 1R0 = 1.0 µH One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9005_MPLCG • 3/26/2019 1 SMD Inductors Large-Current Power Inductors MPLCG Performance Characteristics Item Operating Temperature Rated Inductance Range Inductance Tolerance Rated DC Resistance Range Rated Current Range Performance Characteristics –40°C to +125°C (including self-temperature rise) 0.22 – 4.70 µH at 100 kHz, 1 mA ±20% 2.7 – 74.0 mΩ maximum 4.5 – 14.1 A Table 1 – Ratings & Part Number Reference Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) Maximum MPLCG0530LR22 0.22 ±20% MPLCG0530LR33 0.33 ±20% Rated Current (A) Irms1 (Ref.) Isat2 (Ref.) 3.7 14.1 10.2 7.3 10.3 8.9 MPLCG0530LR47 0.47 ±20% 8.4 9.5 8.9 MPLCG0530LR68 0.68 ±20% 11.6 7.9 6.8 MPLCG0530L1R0 1.00 ±20% 14.6 7.4 5.6 MPLCG0530L1R5 1.50 ±20% 21.7 5.9 5.6 MPLCG0530L2R2 2.20 ±20% 36.4 4.5 5.0 MPLCG0530L3R3* 3.30 ±20% 58.0 3.6 3.1 MPLCG0530L4R7* 4.70 ±20% 74.0 3.1 3.0 MPLCG0630LR22* 0.22 ±20% 2.7 21.4 17.9 MPLCG0630LR33* 0.33 ±20% 4.3 16.9 17.3 MPLCG0630LR47 0.47 ±20% 5.0 15.8 15.6 MPLCG0630LR68* 0.68 ±20% 6.0 14.2 12.6 MPLCG0630LR82* 0.82 ±20% 7.0 13.1 11.8 MPLCG0630L1R0 1.00 ±20% 9.0 11.9 11.3 8.3 MPLCG0630L1R5 1.50 ±20% 15.0 9.9 MPLCG0630L2R2 2.20 ±20% 19.0 8.2 7.8 MPLCG0630L3R3 3.30 ±20% 30.0 6.5 6.3 MPLCG0630L4R7 4.70 ±20% 41.0 5.5 5.4 T = 40 K rise at rated current Inductance drop 20% at rated current All electrical characteristics data is referenced to 20°C. * This part is not for new design. 1 2 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9005_MPLCG • 3/26/2019 2 SMD Inductors Large-Current Power Inductors MPLCG SMD DC-Superposed Characteristics 3.0 Large-Current Power Inductors MPLCG Series MPLCG06 MPLCG05 [RoHS [RoHS Compliant] Compliant] 2R2 SMD Type 5.0 1R5 Large-Current Power Inductors 1R0 MPLCG Series R68 In ducta n ce D C re sis ta n ce （μH） RD C（m Ω）m ax. at 100kHz MPLCG0530LR22 0.22±20% 3.7 4.0 MPLCG0530LR33 0.33±20% 7.3 MPLCG0530L1R 0 1.0±20% 14.6 MPLCG0530L1R 5 1.5±20% 21.7 MPLCG0530L2R2 2.2±20% 36.4 MPLCG0630L1R 0 1.0±20% 9.0 MPLCG0630L1R 5 1.5±20% 15.0 3.0 MPLCG0630L2R2 2.2±20% 19.0 Rated cu rr e n t（A） D C MPLCG0630L3R3 re sis ta n ce 3.3±20% 30.0 Irms ＊1 Is at ＊2 RD C（m Ω）m ax. MPLCG0630L4R7 4.7±20% (Ref.) 41.0 (Ref.) 3.7 14.1 10.2 ＊1　T=40K ris e at rated c urr e n t.　＊2　I n d u cta n ce d rop 20% at rated c urr e n t. ●Ope rati ng te m7.3 pe rat ur e ra ng e: －20～+120 (I 10.3n cl u de s elf te m pe rat ur8.9 e ris e) 14.6 7.4 5.6 21.7 5.9 5.6 2.0 36.4 4.5 5.0 Shape and Dimensions 　　 9.0 11.9 11.3 (1.1) 5.5 Maximum SMD Type 3.0 Maximum 15.0 9.9 8.3 ● MPLCG0530 SMD Type 19.0 8.2 7.8 30.0 6.5 6.3 41.0 5.5 5.4 Part No. 1.0 R47 R33 R22 In ducta n ce Large-Current Power Inductors Large-Current Power Inductors MPLCG Series MPLCG Series [RoHS [RoHS Compliant] Compliant] ＊1　T=40K ris e at rated c urr e n t.　＊2　I n d u cta n ce d rop 20% at rated c urr e n t. ●Ope rati ng te m pe rat ur e ra ng e: －20～+120 (I n cl u de s elf te m pe rat ur e ris e) Lot No. 5.5 Maximum 5.5 Maximum ● MPLCG0530 PL o a rt t NNoo. . Lot No. 2.5 ±0.2 2.5 ±0.2 3.0 Maximum (1.1) 3.0 Maximum (1.1) Recommended co mm e n deLand d Land Pattern Patt e rn ● MPLCG0530 (0.1) (0.1) 2.8 ● MPLCG0630 10.2 8.9 10.2 5.6 8.9 5.6 5.6 5.0 5.6 11.3 5.0 8.3 11.3 7.8 8.3 6.3 (1.4) 7.8 5.4 6.3 Part No. (Ref.) (1.4) 3.2 ±0.2 Lot No. (1.1) (1.1) 15 (1.4) 20 (0.1) 5.4 (0.1) ● MPLCG0630 ● MPLCG0630 1.7 7.5 Maximum 3.0 Maximum (1.4) (1.4) 2.3 1 .7 1.7 3.7 2. 0 2.0 2.0 2.0 2. 0 3.7 Power Inductors VOL.11 (0.1) (0.1) 1.7 ＊2 (1.1) DC Current (A) Land Pattern (mm) (1.4) Lot No. Is at rr e n t（A） (Ref.) 5.5 (1.4) Part No. cu (1.4) 10 Recommended co mm e n deLand d Land Pattern Patt e rn ● MPLCG0530 3.0 Maximum PL o a rt t NNoo. . 3.2 ±0.2 3.2 ±0.2 14.1 10.3 14.1 7.4 10.3 5.9 7.4 4.5 5.9 (0.1) 11.9 4.5 9.9 11.9 8.2 3.0 Maximum 9.9 6.5 8.2 5.5 6.5 (Ref.) 7.5 Maximum 6.7 ±0.2 6.7 ±0.2 ● MPLCG0630 ＊1 Rated (Ref.) ＊2 10.2 8.9 5.6 5.6 5.0 11.3 8.3 7.8 6.3 5.4 [mm] 5.0 ±0.2 5.0 ±0.2 Part No. MPLCG0530 MPLCG0630 2.5 ±0.2 Dimensions (mm) Irms 3.0 Maximum 5 Is at (Ref.) 3.5 　　 　　 41.0 Part No. ＊1 rr e n t（A） R47 Is at 14.1 10.3 7.4 5.9 4.5 11.9 9.9 8.2 6.5 5.5 3.5 Shape and Dimensions Shape and Dimensions ● MPLCG0530 4.7±20% n ce d rop 20% at rated c urr e n t. n cl u de s elf te m pe rat ur e ris e) n ce d rop 20% at rated c urr e n t. n cl u de s elf te m pe rat ur e ris e) Irms 7.5 Maximum 0 ● MPLCG0630 Rated cu (0.1) 2.8 MPLCG0630 ＊1　T=40K MPLCG0630L4R7 ris e at rated c urr e n t.　＊2　I n d u cta ●Ope rati ng te m pe rat ur e ra ng e: －20～+120 (I ＊1　T=40K ris e at rated c urr e n t.　＊2　I n d u cta ●Ope rati ng te m pe rat ur e ra ng e: －20～+120 (I Case Size 5.0 ±0.2 DC Current (A) 20 6.7 ±0.2 Dimensions Model MPLCG0530LR22 MPLCG0530LR33 MPLCG0530LR22 MPLCG0530L1R 0 MPLCG0530LR33 MPLCG0530L1R 05 MPLCG0530L1R MPLCG0530L2R2 MPLCG0530L1R 5 MPLCG0630L1R 0 MPLCG0530L2R2 MPLCG0630L1R 05 MPLCG0630L1R MPLCG0630L2R2 MPLCG0630L1R 5 MPLCG0630L3R3 MPLCG0630L2R2 ● MPLCG0630L4R7 MPLCG0630L3R3 D C re sis ta n ce RD C（m Ω）m ax. PDaCr t re N osis . ta n ce RD C（m Ω）m 3.7 ax. L o t N o . 7.3 3.7 14.6 7.3 21.7 14.6 36.4 21.7 9.0 36.4 15.0 9.0 19.0 15.0 7.5 Maximum 30.0 19.0 41.0 30.0 2.5 ±0.2 2.5 ±0.2 Model 15 n ce （μH） In atducta 100kHzn ce （μH） 0.22±20% at 100kHz 0.33±20% 0.22±20% 1.0±20% 0.33±20% 1.5±20% 1.0±20% 2.2±20% 1.5±20% 1.0±20% 2.2±20% 1.5±20% 1.0±20% 2.2±20% 1.5±20% 3.3±20% 2.2±20% 4.7±20% 3.3±20% 2.5 ±0.2 10 In ducta (1.1) 1R0 rr e n t（A） 3.2 ±0.2 ● MPLCG0530 0.0 (1.1) 3.0 Maximum 2.3 16 3.2 ±0.2 3.2 ±0.2 5 2.5 ±0.2 0 5.5 Maximum 3.2 ±0.2 0.0 Lot No. 　　 Shape and Dimensions [RoHS [RoHS Compliant] Compliant] 1R5 ＊1 (Ref.) 2.5 ±0.2 1.0 2R2 Rated cu Irms 3.2 ±0.2 MPLCG0530LR22 MPLCG0530LR33 MPLCG0530L1R 0 MPLCG0530L1R 5 MPLCG0530L2R2 MPLCG0630L1R 0 MPLCG0630L1R 5 MPLCG0630L2R2 MPLCG0630L3R3 MPLCG0630L4R7 3R3 5.0 ±0.2 （μH） at 100kHz 0.22±20% 0.33±20% 1.0±20% 1.5±20% 2.2±20% 1.0±20% 1.5±20% 2.2±20% 3.3±20% 4.7±20% Model 4R7 6.7 ±0.2 [RoHS [RoHS Compliant] Compliant] 2.0 Inductance at 20°C (µH) Inductance at 20°C (µH) Model [mm] 2.0[mm] 1.7 1 .7 ● MPLCG0630 Recommended co mm e n deLand d Land Pattern Patt e rn ● MPLCG0530 Recommended co mm e n deLand d Land Pattern Patt e rn ● MPLCG0530 ● MPLCG0630 3.5 3.5 16 2.8 2.8 Power Inductors VOL.11 1.7 2.3 1.7 1 .7 2.0 3.7 2. 0 2.0 1.7 2.3 1.7 1 .7 2.0 3.7 2. 0 2.0 Power Inductors VOL.11 Power 16 Inductors VOL.11 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard 16 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9005_MPLCG • 3/26/2019 3 ＊2 SMD Inductors Large-Current Power Inductors MPLCG Taping Specification Dimensions of Indented Square Hole Plastic tape F P2 E1 D0 REEL 2R 2 Lot No. Part No. W P0 T 1R 5 REEL P1 Reel Dimensions W2 Dimensions (mm) Case Reel Size Quantity Dimensions ofAIndented Square HoleWPlasticFtape E C P1 P2 P0 1 D 0 C D MPLCG0630 T 3,500 Nominal REEL ±0.1 E 1 8.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 ±0.1 7.5 ±0.1 1.75 ±0.1 12.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 Lot No. Reel Specifications T ±0.1 1.75 A B ±0.3 W1 16.0 øD0 ±0.1 5.5 D0 P2 Part No. Tolerance Nominal 2,000 Enlarged View ±0.3 12.0 F W MPLCG0530 A0 P0 Tolerance 2R 2 1R 5 REEL P1 Reel Dimensions D A0 C A C B A0 W2 D Enlarged View W1 Dimensions (mm) Case Size A B C D MPLCG0530 Tolerance Nominal ±5.0 ø380 ±10.0 ø95 ±1.0 ø13.5 ±0.8 ø21.0 ±0.5 2.0 A0 ±1.5 14.5 ±2.0 18.5 MPLCG0630 Tolerance Nominal ±5.0 ø380 ±10.0 ø95 ±1.0 ø13.5 ±0.8 ø21.0 ±0.5 2.0 ±1.0 18.0 ±1.5 21.6 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com W1 W2 L9005_MPLCG • 3/26/2019 4 SMD Inductors Large-Current Power Inductors MPLCG Soldering Process Recommended Reflow Soldering Profile Reference ICP/JEDEC J-STD-020E Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) Temperature Maximum (TSmax) Time (ts) from Tsmin to Tsmax 150°C 200°C 60 – 120 seconds Ramp-up Rate (TL to TP) 3°C/second maximum Liquidous Temperature (TL) 217°C Time Above Liquidous (tL) 60 – 150 seconds Peak Temperature (TP) 250°C Time within 5°C of Maximum Peak Temperature (tP) 30 seconds maximum Ramp-down Rate (TP to TL) 6°C/second maximum Time 25°C to Peak Temperature 8 minutes maximum TP TL Temperature Profile Feature tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin 25 ts 25°C to Peak Time Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly, preferably within six months of receipt. Export Control For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan Inductors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9005_MPLCG • 3/26/2019 5 SMD Inductors Large-Current Power Inductors MPLCG KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9005_MPLCG • 3/26/2019 6