SBS9080-509T

DC Line Filters Common Mode for Power Line, SMD Type, SBS9080 Series Overview Applications The KEMET SBS9080 coils are common mode chokes with a wide variety of characteristics. These SMD toroidal coils are suitable for noise countermeasure in DC power line circuits. • Audio-visual equipment • Office automation equipment • Digital appliances • Home appliances • Power supplies Benefits • Nickel-Zinc (Ni-Zn) ferrite core • Withstanding voltage: 125 VDC (one minute, between lines) • Insulation resistance: more than 10 MΩ (100 VDC, between lines) • SMD, available in Tape & Reel • Operating temperature range from −25°C to +50°C • UL94 V–0 flame retardant rated cap • RoHS Compliant Part Number System SBS 9080- 5 09T Series Size Rated Current (A) Inductance Code µH SBS 9080 = 9x8 mm 5=5A 09T = 0.9 µH Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0072_SBS9080 • 12/9/2020 1 DC Line Filters – Common Mode for Power Line, SMD Type, SBS9080 Series Dimensions – Millimeters Part Number Dimensions Millimeters Circuit Diagram Recommended Land Pattern Millimeters SBS9080 Environmental Compliance KEMET SBS9080 DC Line Filters comply with EU RoHS Directive 2011/65/EU and (EU) 2015/863. Products that fall under the exemptions listed in below table are also included. Series RoHS Compliant RoHS Exemption Code SBS9080 Yes 7(a) Code Exemption 7(a) Lead in high melting temperature type solders (i.e. leadbased alloys containing 85 % by weight or more lead) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0072_SBS9080 • 12/9/2020 2 DC Line Filters – Common Mode for Power Line, SMD Type, SBS9080 Series Performance Characteristics Item Performance Characteristics Rated Voltage Withstanding Voltage Insulation Resistance Rated Current Rated Inductance Range Inductance Measurement Condition Rated DC Resistance Operating Temperature 50 VDC 125 VDC (1 minute, between lines) > 10 MΩ at 100 VDC (between lines) 5A 0.9 µH 100 kHz 15 mΩ maximum −25°C to +50°C (not including self-temperature rise) Table 1 – Ratings & Part Number Reference Part Number Rated Voltage DC (V) Rated Current DC (A) Inductance (µH) Minimum DC Resistance/Line (mΩ) Maximum Weight (g) SBS9080-509T 50 5 0.9 15 0.9 Frequency Characteristics Packaging Part Type Packaging Type Pieces per Package Pieces per Box SBS9080-509T Tape & Reel 1,000 2,000 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0072_SBS9080 • 12/9/2020 3 DC Line Filters – Common Mode for Power Line, SMD Type, SBS9080 Series Taping Specifications Dimensions of Indented Square Hole Plastic Tape - Millimeters A B W F E P1 P2 P0 D0 T T2 K ±0.3 9.50 ±0.3 10.30 ±0.3 16.00 ±0.1 7.50 ±0.1 1.75 ±0.1 12.00 ±0.1 2.00 ±0.1 4.00 +0.1, −0.0 1.50 0.6≥ 0.60 7.2≥ 7.20 7.0≥ 7.00 Reel Specifications Reel Dimensions - Millimeters A N W1 +0.5 W2 25.0 ≥ 330.0 100.0 17.5 25.0 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0072_SBS9080 • 12/9/2020 4 DC Line Filters – Common Mode for Power Line, SMD Type, SBS9080 Series Soldering Process Recommended Reflow Soldering Profile: TP Temperature TL tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin ts 25 25°C to Peak Time Reference ICP/JEDEC J–STD–020E Profile Feature Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 150°C Temperature Maximum (TSmax) 180°C Time (ts) from Tsmin to Tsmax) 80 – 120 seconds Ramp-up Rate (TL to TP) 3°C/second maximum Liquidous Temperature (TL) 230°C Time Above Liquidous (tL) 30 – 40 seconds Peak Temperature (TP) 250°C Time within 5°C of Maximum Peak Temperature (tP) 5 seconds maximum Ramp-down Rate (TP to TL) 6°C/second maximum Time 25°C to Peak Temperature 8 minutes maximum © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0072_SBS9080 • 12/9/2020 5 DC Line Filters – Common Mode for Power Line, SMD Type, SBS9080 Series Handling Precautions Precautions for product storage DC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Do not store near strong magnetic fields, as this might magnetize the product. For optimized solderability, DC line filter stock should be used promptly, preferably within six months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using, check and evaluate the value of the core temperature rise under actual operating conditions. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0072_SBS9080 • 12/9/2020 6 DC Line Filters – Common Mode for Power Line, SMD Type, SBS9080 Series KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0072_SBS9080 • 12/9/2020 7