SN12-800J

AC Line Filters Differential Mode SN Coils, SN-J Series, Terminal Base Type Overview Applications The KEMET SN-J coils are normal mode choke coils with a wide variety of characteristics. These coils are designed with our proprietary Fe dust cores and are useful in various noise countermeasure fields. • Home appliances • Power supplies Benefits • Proprietary Fe dust core material • Excellent for normal mode noise countermeasures • Large core loss • Wide variety of sizes and specifications • Operating temperature range from -25°C to +105°C or +120°C • UL 94 V–2 flame retardant rated cap • UL 94 V–0 flame retardant rated base Part Number System SN 10- 300 J Series Dimension Code (See Dimensions) Specification Code (See Table 1) Terminal Base Type (See Dimensions) 10 12 14P 16P 300 400 500 800 J SN Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0058_SN-J • 8/10/2023 1 AC Line Filters – Differential Mode SN Coils, SN-J Series, Terminal Base Type Dimensions – Millimeters Figure 2 B B L (a) Part Number SN10-300J SN10-400J SN10-500J SN12-800J SN12-400J SN12-500J SN16P-400J SN14P-300J 1 N1 L (a) N1 C A C A (a) Figure 1 (a) Pin Pitch1 (Reference) Dimensions (mm) A (Maximum) B (Maximum) C (Maximum) L a 23.0 23.0 23.0 29.0 28.0 28.0 33.0 35.0 16.0 16.0 16.0 18.0 17.0 17.0 21.0 25.0 26.0 26.0 26.0 29.0 29.0 29.0 33.5 37.0 7.0±2 7.0±2 7.0±2 7.0±2 7.0±2 7.0±2 4.5±1 4.5±1 10 10 10 10 10 10 16 20 Figure Fig. 1 Fig. 1 Fig. 1 Fig. 1 Fig. 1 Fig. 1 Fig. 2 Fig. 2 Pin pitch listed above for reference only. Values not guaranteed © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0058_SN-J • 8/10/2023 2 AC Line Filters – Differential Mode SN Coils, SN-J Series, Terminal Base Type Environmental Compliance All KEMET AC Line Filters are RoHS Compliant. Performance Characteristics Item Performance Characteristics Rated Current Range Rated Inductance Range Inductance Measurement Condition Wire Type Thermal Class 3 – 15 A 40 – 270 µH minimum 100 kHz 1 PVF, 1 UEW, and 1 PEW A (105°C) and E (120°C) Operating Temperature Range −25°C to +105°C (include self temperature rise) and −25°C to +120°C (include self temperature rise) Table 1 – Ratings & Part Number Reference Part Number Rated Current (A) SN10-300J SN10-400J SN10-500J SN12-800J SN12-400J SN12-500J SN16P-400J SN14P-300J 3 3 3 3 5 5 8 15 Inductance DC Resistance/ (µH) Line (mΩ) Minimum Maximum 40 72 110 270 64 100 108 80 0.041 0.056 0.071 0.130 0.037 0.045 0.027 0.015 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Temperature Rise (K) Maximum Wire Diameter (mm) Thermal Class Weight (g) Approximate 23 27 30 45 35 38 45 77 0.8 0.8 0.8 0.8 1.0 1.0 1.5 1.6 A (105°C) A (105°C) A (105°C) A (105°C) A (105°C) A (105°C) E (120°C) E (120°C) 12.5 12.9 14.0 19.0 17.1 20.0 44.9 56.0 LF0058_SN-J • 8/10/2023 3 AC Line Filters – Differential Mode SN Coils, SN-J Series, Terminal Base Type Frequency Characteristics 1M SN10-300J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 1k 100 10 1 1 1k 1M 10k 100k Frequency (Hz) 1M 10M 30M 1k SN10-500J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k 1k 100 10 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M 100k 1M 10M 30M SN12-800J 100 10k 100k Frequency (Hz) 1M 10M 30M 1k SN12-400J 1M 10k 10k Impedance (Ω) 100k Impedance (Ω) 1M 1k 100k 1k 100 10 10k Frequency (Hz) SN12-500J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M 1k SN14P-300J 1M 100k 10k 10k Impedance (Ω) 100k Impedance (Ω) 100k Frequency (Hz) 1 1k 1M 10k 10 1 1M SN10-400J 1k 100 10 10k Frequency (Hz) SN16P-400J 1k 100 10 1 1 1k 10k 100k Frequency (Hz) 1M 10M 30M © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1k 10k Frequency (Hz) LF0058_SN-J • 8/10/2023 4 AC Line Filters – Differential Mode SN Coils, SN-J Series, Terminal Base Type Packaging Type SN10-J SN12-J SN14P-300J SN16P-400J Packaging Type Tray Pieces Per Box 600 300 250 Handling Precautions Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the product. For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using the product, check and evaluate the value of the core temperature rise under actual operating conditions. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0058_SN-J • 8/10/2023 5 AC Line Filters – Differential Mode SN Coils, SN-J Series, Terminal Base Type KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0058_SN-J • 8/10/2023 6