AA3020AMGC

3.0x2.0mm SURFACE MOUNT LED LAMP Part Number: AA3020AMGC Mega Green Features 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM SPACE REQUIRED. SUITABLE FOR COMPACT OPTOELECTRONIC APPLICATIONS. LOW POWER CONSUMPTION. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Mega Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4216 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN:Y.L.LI PAGE: 1 OF 5 ERP: 1201002890 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. AA3020AMGC Mega Green (InGaAlP) WATER CLEAR 36 Typ. 80 Viewing Angle [1] 2θ1/2 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Mega Green Mega Green Mega Green Mega Green Mega Green Mega Green Typ. 574 568 26 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Mega Green 75 30 150 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAH4216 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN:Y.L.LI PAGE: 2 OF 5 ERP: 1201002890 Mega Green AA3020AMGC SPEC NO: DSAH4216 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN:Y.L.LI PAGE: 3 OF 5 ERP: 1201002890 AA3020AMGC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4216 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN:Y.L.LI PAGE: 4 OF 5 ERP: 1201002890 PACKING & LABEL SPECIFICATIONS AA3020AMGC SPEC NO: DSAH4216 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN:Y.L.LI PAGE: 5 OF 5 ERP: 1201002890