APHK1608TGC

1.6x0.8mm SMD CHIP LED LAMP ATTENTION O BSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHK1608TGC GREEN Features ●1.6mmx0.8mm SMT LED, 0.7mm THICKNESS. ●LOW POWER CONSUMPTION. ●WIDE VIEWING ANGLE. ●IDEAL FOR BACK LIGHT AND INDICATOR. ●VARIOUS COLORS AND LENS TYPES AVAILABLE. ●PACKAGE : 2000PCS / REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. ●RoHS COMPLIANT. Description T he Green source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. P ackage Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD1117 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: NOV/06/2006 DRAWN: H.Q.YUAN PAGE: 1 OF 5 ERP:1204000415 S election Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APHK1608TGC GREEN (InGaN) WATER CLEAR 70 Typ. 150 Viewing Angle [1] 2θ1/2 90 ° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Notes: Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 500 505 30 56 3.6 Max. Units nm nm nm pF Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V 4.4 10 V uA 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 110 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1117 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: NOV/06/2006 DRAWN: H.Q.YUAN PAGE: 2 OF 5 ERP:1204000415 Green APHK1608TGC SPEC NO: DSAD1117 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: NOV/06/2006 DRAWN: H.Q.YUAN PAGE: 3 OF 5 ERP:1204000415 APHK1608TGC R ecommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) T ape Specifications (Units : mm) SPEC NO: DSAD1117 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: NOV/06/2006 DRAWN: H.Q.YUAN PAGE: 4 OF 5 ERP:1204000415 PACKING & LABEL SPECIFICATIONS APHK1608TGC SPEC NO: DSAD1117 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: NOV/06/2006 DRAWN: H.Q.YUAN PAGE: 5 OF 5 ERP:1204000415