WP7679C1PBC-Z

SUPER FLUX LED LAMP PRELIMINARY SPEC Part Number: WP7679C1PBC/Z Technical Data ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES yalin 數位簽署者：yalin DN：cn=yalin, o, ou, email=sjhou@cn. kingbright.com, c=< 無> 日期︰2008.05.13 18:31:33 +08'00' Description Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Features: * High Luminance output. * Design for High Current Operation. * Uniform Color. * Low Power Consumption. * Low Thermal Resistance. * Low Profile. * Packaged in tubes for use with automatic insertion equipment. * Soldering methods: Wave soldering. * RoHS Compliant. Benefits: *Outstanding Material Efficiency. *Electricity savings. *Maintenance savings. *Reliable and Rugged. Typical Applications: *Automotive Exterior Lighting. *Electronic Signs and Signals. *Specialty Lighting. SPEC NO: DSAH1440 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: MAY/13/2008 DRAWN: S.P.Chen PAGE: 1 OF 5 ERP: 1101019350 Outline Drawings Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. Absolute Maximum Ratings at TA=25°C PARAMETER DC Forward Current Power dissipation Reverse Voltage Operating Temperature Storage Temperature Lead Solder Temperature[1] 1.1.5mm[0.06inch]below seating plane. NO Reflow soldering . PB/Z 50 210 5 -40 To +85 -55 To +85 260°C For 5 Seconds UNITS mA mW V °C °C SPEC NO: DSAH1440 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: MAY/13/2008 DRAWN: S.P.Chen PAGE: 2 OF 5 ERP: 1101019350 Selection Guide Part No. LED COLOR Min. WP7679C1PBC/Z Blue (InGaN) 0.9 Iv(cd)[1] @50mA Typ. 2.5 Фv(lm)[1] @50mA Typ. 2.4 Viewing Angle[2] 2θ1/2 Typ. 50 ° Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized; Luminous Intensity / luminous flux: +/-15%. 2.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Optical Characteristics at TA=25°C IF=50mA Rθj-a=200°C/W DEVICE TYPE PEAK WAVELENGTH λPEAK (nm) TYP. DOMINANT[1] WAVELENGTH λDOM (nm) TYP. SPECTRAL LINE WAVELENGTH Δλ1/2(nm) TYP. PB/Z 458 465 22 Note: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device; Wavelength: +/-1nm. Electrical Characteristics at TA=25°C FORWARD VOLTAGE [1] VF (VOLTS) @ IF=50mA TYP. MAX. REVERSE CURRENT IR (uA) @ VR=5V MAX. CAPACITANCE C (pF) @ VF=0V F=1MHZ TYP. THERMAL RESISTANCE Rθj -pin °C/W TYP. DEVICE TYPE PB/Z 3.5 4.2 10 110 130 Note: 1. Forward Voltage: +/-0.1V. SPEC NO: DSAH1440 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: MAY/13/2008 DRAWN: S.P.Chen PAGE: 3 OF 5 ERP: 1101019350 Figures SPEC NO: DSAH1440 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: MAY/13/2008 DRAWN: S.P.Chen PAGE: 4 OF 5 ERP: 1101019350 PACKING & LABEL SPECIFICATIONS WP7679C1PBC/Z SPEC NO: DSAH1440 APPROVED: WYNEC REV NO: V.5 CHECKED: Allen Liu DATE: MAY/13/2008 DRAWN: S.P.Chen PAGE: 5 OF 5 ERP: 1101019350