WP7701C4ZGC

SnapLED PRELIMINARY SPEC Part Number: WP7701C4ZGC Technical Data ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Features: *HIGH LUMINANCE OUTPUT. *DESIGN FOR HIGH CURRENT OPERATION. *SOLDERLESS MOUNTING TECHNIQUE. *LOW POWER CONSUMPTION. *LOW THERMAL RESISTANCE. *LOW PROFILE. *PACKAGED IN TUBES FOR USE WITH AUTOMATIC INSERTION EQUIPMENT. *RoHS COMPLIANT. Typical Applications: *Automotive Exterior Lighting. *Solid State Lighting and Signaling. Benefits: *Rugged Lighting Products. *Electricity savings. *Maintenance savings. *Environmental Conformance. SPEC NO: DSAH3837 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1101020288 Outline Drawings Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH3837 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1101020288 Absolute Maximum Ratings at TA=25°C PARAMETER DC Forward Current Power dissipation Reverse Voltage Operating Temperature Storage Temperature ZG 30 135 5 -40 To +85 -55 To +85 UNITS mA mW V °C °C Selection Guide Iv(cd)[1] @30mA Min. WP7701C4ZGC Green (AlInGaN) 2.5 Typ. 4 Viewing Angle[2] 2θ1/2 Typ. 50 ° Part No. LED COLOR Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized; Luminous Intensity / luminous flux: +/-15%. 2.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Optical Characteristics at TA=25°C IF=30mA Rθj-a=200°C/W DEVICE TYPE PEAK WAVELENGTH λPEAK (nm) TYP. DOMINANT[1] WAVELENGTH λDOM (nm) TYP. SPECTRAL LINE WAVELENGTH Δλ1/2(nm) TYP. ZG 515 525 30 Note: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device; Wavelength: +/-1nm. Electrical Characteristics at TA=25°C FORWARD VOLTAGE [1] VF (VOLTS) @ IF=30mA TYP. MAX. REVERSE CURRENT IR (uA) @ VR=5V MAX. CAPACITANCE C (pF) @ VF=0V F=1MHZ TYP. THERMAL RESISTANCE Rθj -pin °C/W TYP. DEVICE TYPE ZG 3.5 4.5 10 45 150 Note: 1. Forward Voltage: +/-0.1V. SPEC NO: DSAH3837 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1101020288 Figures SPEC NO: DSAH3837 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1101020288 PACKING & LABEL SPECIFICATIONS WP7701C4ZGC SPEC NO: DSAH3837 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/29/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1101020288