CCF1N1TTE

1733 Reader's Spreads pg1-203:document 1/27/09 4:14 PM Page 175 CCF chip fuse EU features • Surface mount fuse suitable for primary and secondary circuits • Ceramic case provides excellent mechanical strength • Suitable for flow and reflow soldering • Marking: White body color with black marking • Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction W Type L CCF L .236±.008 (6.0±0.2) Dimensions inches (mm) W t .098±.008 (2.5±0.2) .098±.008 (2.5±0.2) d .055±.008 (1.4±0.2) t d End Cap d Ceramic Fuse Case Element ordering information New Part # CCF Type 1 Style N Characteristic N: Normal blow 1 Rated Current Reference rating chart T Termination Material T: Sn TE Packaging TE: 4mm pitch embossed plastic (1,000 pieces/reel) For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/13/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 177 circuit protection 1733 Reader's Spreads pg1-203:document 1/27/09 4:14 PM Page 176 PMS 300 neg. Black neg. CCF chip fuse applications and ratings Part Designation circuit protection NEW NEW Current Rating 400mA 500mA 630mA 800mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 7A 8A 10A 12A 15A Voltage Rating UL (c-UL) AC 125V DC 60V (DC 160V) Operating Temperature Range Interrupting Capacity UL (c-UL) AC 125V 50A DC 60V 50A (DC 160V) Fusing Characteristics Rated Current Fusing Time UL (c-UL) 100% 200% 4 hour min. 1 second max. Internal R. (mΩ) Max. 650 510 390 250 90.4 75.9 59.3 42.9 36.6 26 20.1 15.3 11.4 10.5 9.5 7.5 4.5 3.5 Normal Melting l2t (A2, seconds) 0.024 0.030 0.052 0.125 0.156 0.220 0.513 0.814 1.31 2.37 3.85 6.5 10.6 12.8 17.0 27.7 73.5 125.5 CCF1N0.4 CCF1N0.5 CCF1N0.63 CCF1N0.8 CCF1N1 CCF1N1.25 CCF1N1.6 CCF1N2 CCF1N2.5 CCF1N3.15 CCF1N4 CCF1N5 CCF1N6.3 CCF1N7 CCF1N8 CCF1N10 CCF1N12 CCF1N15 PSE AC 100V -55°C to +125°C PSE AC 100V 100A PSE 130% 160% 200% UL (c-UL) 100% 200% 4 hour min. 1 hour max. 1 second max. 4 hour min. 1 second max. UL (c-UL) AC 125V DC 60V UL (c-UL) AC 125V 50A DC 60V 50A (DC 160V) (DC 160V) UL (c-UL) AC 65V DC 65V UL (c-UL) AC 65V 50A DC 65V 50A UL (c-UL) 100% 200% 4 hour min. 60 seconds max. environmental applications Derating Curve 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 -55 Derating Coefficient Number Fusing Characteristics 10 Fusing Time (Sec.) 0.4 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 4 5 6.3 7 8 10 12 15 1 Fusing Current (A) 10 1 .1 .01 -35 -15 5 25 45 65 85 105 125 .001 0.1 100 Ambient Temperature (°C) Performance Characteristics Parameter Fusing Time Surface Temperature Rise Bending Test Resistance to Solder Heat Solderability Load Life Moisture Resistance Temperature Cycling Requirement Within specified time, no restrike Maximum temperature rise 140°C (rated current x 115%) Maximum temperature rise 75°C (rated current x 100%) No mechanical damages ∆R: ±10% 95% coverage minimum ∆R: ±10% ∆R: ±10% ∆R: ±10% Test Method Fusing time measured under rated current x 160% and x 200% Surface temperature should be measured by passing current Width of holding point: 90mm, Bending: 3mm, 1 time 260°C ± 5°C, 10 seconds ± 0.5 seconds 235°C ± 5°C, 3 seconds ± 0.5 seconds 70°C ± 2°C, 1000 hours, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle 40°C ± 2°C, 90 - 95% RH, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle -55°C (30 minutes)/+125°C (30 minutes) cycle 11/21/08 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 178 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com