SDB20D60D2
Schottky Barrier Rectifier
DUAL COMMON CATHODE SCHOTTKY RECTIFIER
Features
Low forward voltage drop Low power loss and High efficiency Low leakage current High surge capacity Full lead (Pb)-free and RoHS compliant device
1 2 3 1 2, 4 3 Pin 1, 3 : Anode Pin 2, 4 : Cathode 4
Applications
High efficiency SMPS Output rectification High frequency switching Freewheeling DC-DC converter systems
D2-PAK
Product Characteristics
IF(AV) VRRM VFM at 125℃ IFSM 2 X 10A 60V 0.55V 150A
Description
The SDB20D60D2 is suited for Switch Mode Power Supply and high frequency DC to DC converters. This device is especially intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications.
Ordering Information
Device SDB20D60D2 Marking Code SDB20D60D2 Package D2-PAK Packaging Tape & Reel
Marking Information
AUK = Manufacture Logo Δ = Control Code of Manufacture AUK △YMDD SDB20D60D2 YMDD = Date Code Marking -. Y = Year Code -. M = Monthly Code -. D = Daily Code SDB20D60D2 = Specific Device Code
KSD-D6S015-000
1
SDB20D60D2
Absolute Maximum Ratings (Limiting Values)
Characteristic Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage per diode Maximum average forward rectified current total device Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode Storage temperature range Maximum operating junction temperature IFSM Tstg Tj IF(AV) 20 150 -55 to +150 ℃ 150 A Symbol VRRM VRWM VR Value 60 10 A Unit V
Thermal Characteristics
Characteristic per diode Maximum thermal resistance junction to case total device Rth(j-c) Symbol Value 3.0 2.8 Unit ℃/W
Electrical Characteristics
Characteristic Peak forward voltage drop Symbol VFM (1) Test Condition Tj=25℃ IFM = 10A Tj=125℃ Tj=25℃ VR = VRRM Tj=125℃ Min. Typ. 0.55 0.50 400 Max. 0.65 V 0.55 1.5 mA 200 pF Unit
Reverse leakage current Junction capacitance
IRM (1) Cj
VR = 4VDC, f=1MHz
Note : (1) Pulse test : tP≤380us, Duty cycle≤2% To evaluate the conduction losses use the following equation: PF = 0.35 IF(AV) + 0.019 IF2(RMS)
IFM
Forward Voltage : VFM = Vto + rd IFM 2 IF(AV) rd Conduction Loss : PF = Vto IF(AV) + rd IF2(RMS)
IF(AV)
Vto
VFM
KSD-D6S015-000
2
SDB20D60D2
Rating and Characteristic Curves
Fig. 1) Typical Forward Characteristics (Per Diode) Fig. 2) Typical Reverse Characteristics (Per Diode)
Fig. 3) Maximum Forward Derative Curve
Fig. 4) Forward Power Dissipation (Per Diode)
Fig. 5) Maximum Non-Repetitive Peak Forward Surge Current (Per Diode)
Fig. 6) Typical Junction Capacitance (Per Diode)
KSD-D6S015-000
3
SDB20D60D2
Package Outline Dimension (Unit: mm)
※ Recommend PCB solder land (Unit: mm)
KSD-D6S015-000
4
SDB20D60D2
The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice.
KSD-D6S015-000
5
很抱歉,暂时无法提供与“SDB20D60D2”相匹配的价格&库存,您可以联系我们找货
免费人工找货