SPU03_12

3W DC-DC Unregulated Single Output Converter Features : 3000VDC I/O isolation Internal SMD technology Built-in EMI filter Protection: Short circuit Cooling by free air convection Non-conductive plastic case Single in line package 100% full load burn-in test Low cost / High reliability 2 years warranty SPU03 series SPECIFICATION ORDER NO. DC OUTPUT VOLTAGE CURRENT RANGE EFFICIENCY (Typ.) RATED POWER OUTPUT LINE REGULATION LOAD REGULATION VOLTAGE ACCURACY SWITCHING FREQUENCY VOLTAGE RANGE NORMAL VOLTAGE INPUT INPUT CURRENT FILTER PROTECTION OVERLOAD PROTECTION SHORT CIRCUIT WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WITHSTAND VOLTAGE ISOLATION RESISTANCE SAFETY & ISOLATION CAPACITANCE EMC EMI CONDUCTION & RADIATION EMS IMMUNITY MTBF OTHERS DIMENSION WEIGHT SPU03L-05 5V 60 ~ 600mA 82% 3W Note.3 1.2% for 1% input variation Note.4 8.0% SPU03M-05 SPU03N-05 SPU03L-12 12V 25 ~ 250mA SPU03M-12 SPU03N-12 SPU03L-15 15V 20 ~ 200mA SPU03M-15 SPU03N-15 83% 83% 85% 86% 86% 86% 86% 88% RIPPLE & NOISE (max.) Note.2 50mVp-p 2.0% 60KHz min. 4.5 ~ 5.5V 5V 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 12V 24V 305mA 25mA 155mA 15mA 715mA 65mA 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 12V 24V 300mA 25mA 150mA 15mA 705mA 65mA 10.8 ~ 13.2V 21.6 ~ 26.4V 12V 24V 300mA 30mA 145mA 15mA Full load 740mA No load 60mA Capacitor type Fuse recommended Momentary Protection type : Broken Momentary Protection type : Broken -40 ~ +90 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -40 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes I/P-O/P:3KVDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH 80pF max. Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A 700khrs min. MIL-HDBK-217F(25 ) 19.6*7.5*10.2mm or 0.77"*0.30"*0.40" inch (L*W*H) 2.9g Mechanical Specification 19.6 (0.77) 3.81 (0.15) 10.20 (0.40) Pin Configuration Unit: mm (inch) Derating Curve Pin No. FRONT VIEW Output -Vin -Vout +Vout 100 2 5 7 BOTTOM VIEW NOTE:Pin size tolerance 0.50 0.30mm 0.05mm LOAD (%) 1 +Vin 0.5 (0.02) 7.5 (0.3) 12 5 7 5.08 (0.20) 50 2.54 (0.10) 1.2 (0.05) -40 0 25 50 80 90 100 Ta ( ) NOTE 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SPU03-SPEC 2012-02-22