1N3890A

TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com HIGH RELIABILITY FAST RECOVERY RECTIFIER Qualified per MIL-PRF-19500/304 • 175°C Junction Temperature • 20 Amps Current Rating • VRRM 100 to 400 Volts DEVICES LEVELS 1N3890 1N3891 1N3893 1N3890A 1N3891A 1N3893A 1N3890R 1N3891R 1N3893R 1N3890AR 1N3891AR 1N3893AR JAN JANTX JANTXV ABSOLUTE MAXIMUM RATINGS (TC = +25°C unless otherwise noted) Parameters / Test Conditions Peak Repetitive Reverse Voltage 1N3890 / A / R / AR 1N3891 / A / R / AR 1N3893 / A / R / AR 1N3890 / A / R / AR 1N3891 / A / R / AR 1N3893 / A / R / AR Symbol VRWM Value 100 200 400 100 200 400 20 175 250 1.5 -65°C to 175°C -65°C to 175°C Unit V Peak Working Reverse Voltage Average Forward Current, TC = 100° Peak Surge Forward Current @ tp = 8.3ms, half sinewave, TC = 100°C VRRM IF V A 1N3890, 1N3891, 1N3893 / R 1N3890A, 1N3891A, 1N3893A / AR IFSM RθJC TJ Tstg A °C/W °C °C Thermal Resistance, Junction to Case Operating Junction Temperature Range Storage Temperature Range DO-203AA (DO-4) ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted) Parameters / Test Conditions Forward Voltage IFM = 38A, TC = 25°C* Forward Voltage IFM = 250A, TC = 150°C** Reverse Current VRM = 100V, TC = 25°C VRM = 200V, TC = 25°C VRM = 400V, TC= 25°C Reverse Current VRM = 100V, TC = 150°C VRM = 200V, TC = 150°C VRM = 400V, TC = 150°C Reverse Recovery Time VRM = 30V, IF = 1A, TC = 55°C* Symbol VFM VFM 1N3890 / A / R / AR 1N3891 / A / R / AR 1N3893 / A / R / AR 1N3890 / A / R / AR 1N3891 / A / R / AR 1N3893 / A / R / AR 1N3890, 1N3891, 1N3893 1N3890A, 1N3891A,1N3893A / AR Min. Max. 1.5 2.75 Unit V V IRM 10 μA IRM 2 200 150 mA Trr ns * Pulse test: Pulse width 300 µsec, Duty cycle 2% ** Pulse test: Pulse width 800 µsec T4-LDS-0143 Rev. 1 (091809) Page 1 of 3 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com HIGH RELIABILITY FAST RECOVERY RECTIFIER GRAPHS FIGURE 1 TYPICAL FORWARD CHARACTERISTICS FIGURE 3 TYPICAL JUNCTION CAPACITANCE FIGURE 4 FORWARD CURRENT DERATING FIGURE 2 TYPICAL REVERSE CHARACTERISTICS T4-LDS-0143 Rev. 1 (091809) Page 2 of 3 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com HIGH RELIABILITY FAST RECOVERY RECTIFIER PACKAGE DIMENSIONS Physical dimensions of non-isolated types: (DO-4) 1N3890, 1N3890A, 1N3891, 1N3891A, 1N3893, 1N3893A, 1N3890R, 1N3890AR, 1N3891R, 1N3891AR, 1N3893R and 1N3893AR NOTES: Ltr 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Angular orientation of this terminal is undefined. Square or radius on end of terminals is optional. 4. Diameter variations within these limits are permitted. 5. The ANSI thread reference is 0.190-32 UNF-2A 6. Max pitch diameter of plated threads shall be basic pitch diameter 0.169 inch (4.29 mm) reference FED-STD-H28 (Screw Thread Standards for Federal Services). 7. Units must not be damaged by torque of 15 inch-pounds applied to 0.190-32 UNF-2B nut assembled on thread. 8. Complete threads to extend to within 0.078inch (1.98 mm) of the seating plane. 9. Terminal-end shape is unrestricted 10. Reversed (anode to stud) units shall be marked with an “R” following the last digit in the type number. 11. Forward polarity (cathode to stud) marking is shown. CD CH CH1 G HF HT OAH OM SL SP T TD Dimensions Inches Millimeters Min Max Min Max 0.250 6.35 0.405 10.29 0.020 0.065 0.51 1.65 0.060 1.52 0.424 0.437 10.77 11.10 0.075 0.175 1.90 4.44 0.800 20.32 0.163 0.189 4.14 4.80 0.422 0.453 10.72 11.50 0.060 0.424 1.52 10.77 Notes 3 5, 6, 7, 8 T4-LDS-0143 Rev. 1 (091809) Page 3 of 3