36643-0003

PRODUCT SPECIFICATION .084 / (.13) DIAMETER SERIES MLX GLOW WIRE COMPATIBLE WTW CONNECTOR SYSTEM (HOT TIN-PLATED TERMINALS ONLY) Receptacle Cap Plug Housing Series: 36644 Series: 36643 MLX Connectors Web Page REVISION: B ECM INFORMATION: EC No: 621730 DATE: 8/6/2019 DOCUMENT NUMBER: PS-36644-001 TABLE OF CONTENTS PRODUCT SPECIFICATION FOR .084/(2.13) DIAMETER SERIES MLX GLOW WIRE COMPATIBLE WTW CONNECTOR SYSTEM TITLE: SHEET No. 1 of 8 DOC PRODUCT SPECIFICATION FOR CONNECTOR CREATED / REVISED BY: CHECKED BY: APPROVED BY: PART: SYSTEMSMAHAJANSHET PS 001 MBN02 NCSR DOC TYPE: Molex is a registered trademark of Molex, LLC in the Unites States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. PRODUCT SPECIFICATION Table of Contents ITEMS PAGE 1.0 SCOPE ....................................................................................................................... 3 2.0 PRODUCT DESCRIPTION ........................................................................................ 3 2.1 DESCRIPTION, SERIES NUMBER, AND LINKS ................................... 3 2.2 DIMENSIONS, MATERIALS, PLATINGS ................................................ 3 2.3 ENVIRONMENTAL CONFORMANCE .................................................... 3 2.4 SAFETY AGENCY LISTINGS ................................................................. 3 3.0 APPLICABLE DOCUMENTS AND SPECIFICATION ................................................ 3 3.1 MOLEX DOCUMENTS ............................................................................ 3 3.2 INDUSTRY DOCUMENTS ...................................................................... 3 4.0 ELECTRICAL PERFORMANCE RATINGS ............................................................... 4 4.1 VOLTAGE ................................................................................................ 4 4.2 CURRENT AND APPLICABLE WIRES ................................................... 4 4.3 TEMPERATURE ...................................................................................... 4 4.4 GLOW WIRE SERIES ............................................................................. 4 5.0 QUALIFICATION ........................................................................................................ 4 6.0 PERFORMANCE ........................................................................................................ 5 6.1 ELECTRICAL PERFORMANCE .............................................................. 5 6.2 MECHANICAL PERFORMANCE ............................................................ 5 6.3 ENVIRONMENTAL PERFORMANCE ..................................................... 5 7.0 PACKAGING .............................................................................................................. 7 8.0 SHELF LIFE................................................................................................................ 7 9.0 CABLE TIE AND / OR TWIST TIE LOCATION .......................................................... 7 10.0 POLARIZATION AND KEYING OPTIONS ................................................................. 8 MLX Connectors Web Page REVISION: B ECM INFORMATION: EC No: 621730 DATE: 8/6/2019 DOCUMENT NUMBER: PS-36644-001 TABLE OF CONTENTS PRODUCT SPECIFICATION FOR .084/(2.13) DIAMETER SERIES MLX GLOW WIRE COMPATIBLE WTW CONNECTOR SYSTEM TITLE: SHEET No. 2 of 8 DOC PRODUCT SPECIFICATION FOR CONNECTOR CREATED / REVISED BY: CHECKED BY: APPROVED BY: PART: SYSTEMSMAHAJANSHET PS 001 MBN02 NCSR DOC TYPE: Molex is a registered trademark of Molex, LLC in the Unites States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. PRODUCT SPECIFICATION 1.0 SCOPE This specification covers the 0.250-inch (6.35mm) centerline tin plated connector series terminated to 14 to 20 AWG wire using crimp technology. 2.0 PRODUCT DESCRIPTION 2.1 DESCRIPTION, SERIES NUMBER, AND LINKS DESCRIPTION Receptacle Housing Plug Housing 2.2 SERIES NUMBER 36644 36643 DIMENSIONS, MATERIALS, PLATINGS Refer SD-36644-001, SD-36643-001. 2.3 ENVIRONMENTAL CONFORMANCE To find product compliance information: a. Go to molex.com b. Enter the part number in the search field. c. At the bottom of the page go to “Environmental” to see compliance status. 2.4 SAFETY AGENCY LISTINGS UL File Number: E29179 3.0 APPLICABLE DOCUMENTS AND SPECIFICATION 3.1 MOLEX DOCUMENTS Molex Quality Crimping Handbook Order No. 63800-0029 Molex Moisture Technical Advisory AS-45499-001 Molex Package Handling Specification 454990100-PK ATS – Application Tooling Specification* *Application Tooling Specification for terminals is not provided in this document. ATS for terminals can be available from respective terminal part number page in Molex.com 3.2 INDUSTRY DOCUMENTS UL-60950-1 IEC/EN 61984 MIL-STD-1344 MLX Connectors Web Page REVISION: B ECM INFORMATION: EC No: 621730 DATE: 8/6/2019 DOCUMENT NUMBER: PS-36644-001 TABLE OF CONTENTS PRODUCT SPECIFICATION FOR .084/(2.13) DIAMETER SERIES MLX GLOW WIRE COMPATIBLE WTW CONNECTOR SYSTEM TITLE: SHEET No. 3 of 8 DOC PRODUCT SPECIFICATION FOR CONNECTOR CREATED / REVISED BY: CHECKED BY: APPROVED BY: PART: SYSTEMSMAHAJANSHET PS 001 MBN02 NCSR DOC TYPE: Molex is a registered trademark of Molex, LLC in the Unites States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. PRODUCT SPECIFICATION 4.0 ELECTRICAL PERFORMANCE RATINGS 4.1 VOLTAGE 600 VOLTS 4.2 CURRENT AND APPLICABLE WIRES 14 to 20 AWG wire – Outside Insulation Diameter 0.130-inch (3030mm) Maximum Temperature vs Current for Brass Terminals in Five Circuit Housings. All five circuits carry the indicated Current. (values above the 30°c rise are extrapolated) 4.3 TEMPERATURE Operating Temperature Range (includes T-Rise from applied current): 4.4 - 55°C to + 105°C GLOW WIRE SERIES 36644, 36643 5.0 QUALIFICATION Laboratory condition, sample selection and test sequences are in accordance with MIL-STD-1344. MLX Connectors Web Page REVISION: B ECM INFORMATION: EC No: 621730 DATE: 8/6/2019 DOCUMENT NUMBER: PS-36644-001 TABLE OF CONTENTS PRODUCT SPECIFICATION FOR .084/(2.13) DIAMETER SERIES MLX GLOW WIRE COMPATIBLE WTW CONNECTOR SYSTEM TITLE: SHEET No. 4 of 8 DOC PRODUCT SPECIFICATION FOR CONNECTOR CREATED / REVISED BY: CHECKED BY: APPROVED BY: PART: SYSTEMSMAHAJANSHET PS 001 MBN02 NCSR DOC TYPE: Molex is a registered trademark of Molex, LLC in the Unites States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. PRODUCT SPECIFICATION 6.0 PERFORMANCE 6.1 ELECTRICAL PERFORMANCE ITEM DESCRIPTION TEST CONDITION REQUIREMENT 6.1.1 Contact Resistance (Low Level) Mate connectors with a maximum voltage of 20 mV and a current of 100 mA (MIL-STD-1344A, METHOD 3004.1) 3.5 milli ohms MAXIMUM (initial) 6.1.2 Insulation Resistance Mate connectors with a voltage of 500 VDC between adjacent terminals (MIL-STD-1344A, METHOD 3003.1) 1000 Mega ohms MINIMUM 6.1.3 Dielectric Strength Mate connectors with a voltage of 2200 V AC for 1 minute between adjacent terminals (MIL-STD-1344A, METHOD 3001.1) No breakdown. Temperature Rise Mate connectors and Measure the contact temperature rise at the rated current load (IEC STD. 512-3) Maximum Temperature of the Terminal over ambient of 30° C (See Sheet 4) 6.1.4 6.2 MECHANICAL PERFORMANCE ITEM DESCRIPTION TEST CONDITION 6.2.1 Wire Pullout Force (Axial) Apply an axial pullout force on the wire at a rate of 1±1/4 inch per minute (25±6 mm per minute) (MIL-STD-1344A METHOD 2003.1). 6.3 Pullout Force 50 lbf 14 lbf DESCRIPTION TEST CONDITION REQUIREMENT Thermal Shock Mate connectors exposed for 25 cycles of: Temperature Duration -55 +0/-3 °C 30 minutes 85 +3/0 °C 30 minutes (MIL-STD-1344A METHOD 1003.1) (TEST CONDITION A-1) Appearance: No Damage Contact Resistance: 5.0 milliohm Maximum Dielectric strength: 2200 V AC for 1 minute 6.3.1 MLX Connectors Web Page B Awg 14 20 ENVIRONMENTAL PERFORMANCE ITEM REVISION: REQUIREMENT ECM INFORMATION: EC No: 621730 DATE: 8/6/2019 DOCUMENT NUMBER: PS-36644-001 TABLE OF CONTENTS PRODUCT SPECIFICATION FOR .084/(2.13) DIAMETER SERIES MLX GLOW WIRE COMPATIBLE WTW CONNECTOR SYSTEM TITLE: SHEET No. 5 of 8 DOC PRODUCT SPECIFICATION FOR CONNECTOR CREATED / REVISED BY: CHECKED BY: APPROVED BY: PART: SYSTEMSMAHAJANSHET PS 001 MBN02 NCSR DOC TYPE: Molex is a registered trademark of Molex, LLC in the Unites States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. PRODUCT SPECIFICATION Individual Tests Wire Pullout force (Axial) MLX Connectors Web Page REVISION: B ECM INFORMATION: EC No: 621730 DATE: 8/6/2019 DOCUMENT NUMBER: PS-36644-001 TABLE OF CONTENTS PRODUCT SPECIFICATION FOR .084/(2.13) DIAMETER SERIES MLX GLOW WIRE COMPATIBLE WTW CONNECTOR SYSTEM TITLE: SHEET No. 6 of 8 DOC PRODUCT SPECIFICATION FOR CONNECTOR CREATED / REVISED BY: CHECKED BY: APPROVED BY: PART: SYSTEMSMAHAJANSHET PS 001 MBN02 NCSR DOC TYPE: Molex is a registered trademark of Molex, LLC in the Unites States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. PRODUCT SPECIFICATION 7.0 PACKAGING Parts shall be packaging to protect the parts from damage during standard shipping, storage, and handling. Refer Molex.com specific part number webpage to get the exact packaging document for that item. 8.0 SHELF LIFE Tin Plated Terminals will have shelf life of 18 months from the date of manufactured. 9.0 CABLE TIE AND / OR TWIST TIE LOCATION CKT Size 2 3 4 6 9 12 15 Dim T Min. 22.18 32.27 42.35 22.18 32.27 42.23 52.31 The “T” dimension defines a “free” length of wire, or a length of wire that is not subject to significant bias by external factors such as a wire tie, wire twisting, or other means of bending or deforming of the wires that repositions them from their natural relaxed state or location where they enter the housing. Wires are to be dressed in such a manner to allow the terminals to float freely in the pocket. This dimension is general recommendation and may need to be adjusted for different wire gauges and wire type and insulation thickness and insulation material. MLX Connectors Web Page REVISION: B ECM INFORMATION: EC No: 621730 DATE: 8/6/2019 DOCUMENT NUMBER: PS-36644-001 TABLE OF CONTENTS PRODUCT SPECIFICATION FOR .084/(2.13) DIAMETER SERIES MLX GLOW WIRE COMPATIBLE WTW CONNECTOR SYSTEM TITLE: SHEET No. 7 of 8 DOC PRODUCT SPECIFICATION FOR CONNECTOR CREATED / REVISED BY: CHECKED BY: APPROVED BY: PART: SYSTEMSMAHAJANSHET PS 001 MBN02 NCSR DOC TYPE: Molex is a registered trademark of Molex, LLC in the Unites States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. PRODUCT SPECIFICATION 10.0 POLARIZATION AND KEYING OPTIONS 10.1 Receptacle Housing (Series: 36644) 10.2 Plug Housing (Series: 36643) MLX Connectors Web Page REVISION: B ECM INFORMATION: EC No: 621730 DATE: 8/6/2019 DOCUMENT NUMBER: PS-36644-001 TABLE OF CONTENTS PRODUCT SPECIFICATION FOR .084/(2.13) DIAMETER SERIES MLX GLOW WIRE COMPATIBLE WTW CONNECTOR SYSTEM TITLE: SHEET No. 8 of 8 DOC PRODUCT SPECIFICATION FOR CONNECTOR CREATED / REVISED BY: CHECKED BY: APPROVED BY: PART: SYSTEMSMAHAJANSHET PS 001 MBN02 NCSR DOC TYPE: Molex is a registered trademark of Molex, LLC in the Unites States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners.