C1U-W-1200-48-TB1C

http:/ www.murata-ps.com PRODUCT OVERVIEW C1U-W-1200-48-Tx Series AC/DC Front End Power Supply The C1U-W-1200 is a 1200 Watt universal AC input, power-factor-corrected (PFC) front-end power supply for general applications. The main output is 48V and standby output of either 5V, 3.3V, or 12V. Packaged in U low profile, it is designed to deliver reliable bulk power to servers, workstations, storage systems or any 48V distributed power architecture systems requiring high power density. The highly efficient electrical and thermal design with internal cooling fans supports reliable operation conditions. The C1U-W-1200 is designed to auto-recover from over-temperature faults. FEATURES  compliant RoHS  1200W (110/220Vac) Output power  Main output, 48V 3.3V, 5V or 12V standby output  Dimensions: 1.67” x 5.5” x 14.2”  Watts per cubic inch density 9.2  redundancy capable, N+1  Active current sharing on main output  Over-voltage, over-current, over-temperature protection  Internal cooling fans INPUT CHARACTERISTICS Parameter Input Voltage Operating Range Input Frequency Turn-on Input Voltage Turn-off Input Voltage Maximum Input Current Inrush Current Power Factor SELECTION GUIDE Part Number C1U-W-1200-48-TA1C C1U-W-1200-48-TC1C C1U-W-1200-48-TA2C C1U-W-1200-48-TC2C C1U-W-1200-48-TB1C C1U-W-1200-48-TB2C Power Output Universal Line 1200W 1200W 1200W 1200W 1200W 1200W Main Output 48V 48V 48V 48V 48V 48V Standby Output 5V 3.3V 5V 3.3V 12V 12V Airflow Front to back Front to back Back to front Back to front Front to back Back to front Conditions Min. 90 47 78.5 70.5 Typ. 55 Max. 264 63 86.5 78 15 90 Units Vac Hz Vac Arms Apk Ramp up Ramp down Output load >90% Output load >50% 95% 75% OUTPUT VOLTAGE CHARACTERISTICS Output Voltage Parameter Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise1 Output Current Load Capacitance Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise1 Operating Range Load Capacitance Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise1 Operating Range Load Capacitance Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise1 Operating Range Load Capacitance Conditions Min. 46.54 Typ. 48 Max. 49.44 480 24.6 10000 Units Vdc mV p-p A μF Vdc mV p-p A μF Vdc mV p-p A μF Vdc mV p-p A μF 48V 20MHz Bandwidth 2 3.3 3.2 0 5 4.85 0 12 11.2 0 3.3Vsb 3.4 50 4.5 1530 5.15 50 4 1530 12.4 120 1.7 1530 5Vsb 12Vsb 　 For full details go to www.murata-ps.com/rohs 1 Ripple and noise are measured with 0.1 uF of ceramic capacitance and 10 uF of tantalum capacitance on each of the power supply outputs. The output noise requirements apply over a 0 Hz to 20 MHz bandwidth. A short coaxial cable with 50ohm scope termination is used. www.murata-ps.com Technical enquiries email: toronto@murata-ps.com, tel: +1 (866) 740 1232 C1U-W-1200-48-Tx.A04 Page 1 of 4 C1U-W-1200-48-Tx Series AC/DC Front End Power Supply OUTPUT CHARACTERISTICS Parameter Remote Sense Efficiency Output Rise Monotonicity Start-up Time Conditions Min. Typ. Max. Units mV % s ms Transient Response 120 220Vac 90.6 Overshoot less than 10% for all outputs, no voltage negative between 10% to 95% during ramp up AC ramp up 1.5 PS_On activated 150 48V Ramp 1A/μs ±600 3.3Vsb Ramp 1A/μs ±165 5Vsb Ramp 1A/μs ±250 12Vsb Ramp 1A/μs At 100% load 20 ±10 mV Current sharing accuracy (up to 3 in parallel) Hold-up Time % ms GENERAL CHARACTERISTICS Parameter Storage Temperature Range Operating Temperature Range Operating Humidity Storage Humidity Shock Sinusoidal Vibration MTBF Acoustic Safety Approvals Input Fuse Material Flammability Switching Frequency Weight Conditions Non-condensing Non-condensing Min. -40 0 10 5 Typ. Max. 70 50 90 90 Units °C % 30G non operating 0.5G, 5 – 500 Hz Calculated per Bellcore at Ta=30°C 200 Khrs Demonstrated 200 Khrs ISO 7779-1999 60 dB LpAm c-CSA-us (CSA 60950-1-03/UL 60950-1, First Edition) TUV approval (Bauart) EN 60950-1:2001 Power Supply has internal 20A/250V fast blow fuse on the AC line input UL 94V-0 90KHz for Boost PFC Converter 165KHz for Main Output Converter 200KHz for Standby Output Converter 2.6kg PROTECTION CHARACTERISTICS Output Voltage Parameter Over-temperature Over Voltage Over Current Over Voltage Over Current Over Voltage Over Current Conditions Auto-restart Latching Latching Latching Latching Latching Latching Min. 55 13 107 3.57 6.5 5.6 5 Typ. Max. 65 14 122 4.02 8 6 7 Units °C V A V A V A 48V 3.3Vsb 5Vsb ISOLATION CHARACTERISTICS Parameter Insulation Safety Rating / Test Voltage Isolation Material Flammability Grounding Conditions Min. Typ. Max. Units Input to Output - Reinforced 3000 Vrms Input to Chassis - Basic 1500 Vrms Output to Chassis Output to Output UL 94V-0 Main Output Return and Standby Output Return are connected internally. 100kΩ resistor parallel with 100nF capacitor is connected between Return and power supply chassis. Main Output Return should be connected to the System Chassis. www.murata-ps.com Technical enquiries email: toronto@murata-ps.com, tel: +1 (866) 740 1232 C1U-W-1200-48-Tx.A04 Page 2 of 4 C1U-W-1200-48-Tx Series AC/DC Front End Power Supply CONTROL SIGNALS Status LED Conditions Off Flashing Yellow Flashing Green Green Description No AC input to all PS Power Supply Failure Main Output Absent Power Supply Good EMISSIONS AND IMMUNITY Characteristic Harmonics Voltage Fluctuation and Flicker Emission Conducted Emission Radiated ESD Electromagnetic Field Electrical Fast Transients/Burst Surge RF Conducted Immunity Magnetic Immunity Voltage dips, interruptions Description IEC/EN 61000-3-2 IEC/EN 61000-3-3 FCC 47 CFR Parts 15/CISPR 22/EN55022 FCC 47 CFR Parts 15/CISPR 22/EN55022 IEC/EN 61000-4-2 IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 IEC/EN 61000-4-8 IEC/EN 61000-4-11 Criteria Class A, 6dB margin Class A, 6dB margin 4kV contact discharge 8kV operational air discharge 15kV non-operational air discharge 1kV/2kV, Performance Criteria B 3 Vac, 80% AM, 1kHz, Performance Criteria A 3 A/m www.murata-ps.com Technical enquiries email: toronto@murata-ps.com, tel: +1 (866) 740 1232 C1U-W-1200-48-Tx.A04 Page 3 of 4 C1U-W-1200-48-Tx Series AC/DC Front End Power Supply MECHANICAL DIMENSIONS CONNECTORS Signal 16 pin connector details, Type: Molex: 39-28-5164 Mating part Molex: 39-51-2164 5.500 (139.70) Pin Signal 15.197 REF (386.00) 14.220 (361.20) AC Input Terminal Block M4 Ground Stud Signal Connector Output Terminal M5 Studs M4 Mounting Thread (4X) 4.803 (122.00) 4.847 (123.12) 1 AC_OK 2 P_GOOD 3 PS_ON 4 BLANK 5 I_SHARE 6 BLANK 7 SENSE+ 8 SENSE9 V_SB 10 V_SB 11 V_SB 12 V_SB 13 GND 14 GND 15 GND 16 GND 2-Pole terminal Block for AC Line and Neutral Stud on Chassis for earth + 48V Main Output GND Dimensions: 1.67” x 5.5 ” x 14.2” 5.000 (127.00) 1.673 (42.50) USA: Canada: UK: France: Germany: Japan: China: Singapore: Mansfield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com Toronto, Tel: (866) 740-1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com Technical enquiries email: toronto@murata-ps.com, tel: +1 (866) 740 1232 Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED 04/03/09 Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. www.murata-ps.com C1U-W-1200-48-Tx.A04 Page 4 of 4