DFE201610R-H-1R0M=P2

Metal Alloy Inductors 金属合金功率电感器 DFE201610R Recommended patterns Inductance Range: 0.47~2.2µH 推荐焊盘尺寸 (Unit: mm) (Unit: mm) FEATURES 特点 • Miniature size: 2016 footprint (2.0mm×1.6mm) and low profile(1.0mm Max. height) • The use of magnetic iron powder ensure capability for large current. • The use of Flat wire for Low DC resistance. • Magnetically shielded, low audible core noise. • Reflow solderable. • Operating temperature : -40～+85°C • 小型薄型构造(2.0ｘ1.6ｍｍ、高度1.0mm Max.) • 使用合金系磁性粉，保证了大电流 • • • • 采用平角线、低直流电阻 闭磁路构造、低芯片噪音 适合回流焊接 使用温度范围：-40～+85°C STANDARD PART NUMBERS 标准零件号码 TYPE DFE201610R (Quantity/reel; 3,000 PCS) 零件号码 Part Number DFE201610R-H-R47M=P2 DFE201610R-H-1R0M=P2 DFE201610R-H-1R5M=P2 DFE201610R-H-2R2M=P2 电感值(1) 公差 Inductance(1) Tolerance L(µH) (%) 0.47 1.0 1.5 2.2 ±20 ±20 ±20 ±20 测试频率 Test Frequency (MHz) 1 1 1 1 (1) Inductance is measured with a LCR meter 4284A (Agilent Technologies) or equivalent. Test frequency at 1MHz (2) DC resistance is measured with 34420A (Agilent Technologies) or 3541(HIOKI). (Reference ambient temperature 20°C) (3) Maximum allowable DC current is that which causes a 30% inductance reduction from the initial value, coil temperature to rise by 40°C whichever is smaller. (Reference ambient temperature 20°C) 最大直流电阻(2) (2) DC Resistance (mΩ) Max. (Typ.) 48 (37) 79 (66) 118 (98) 168 (140) 最大电感值减小电流(3) Inductance Decrease Current(3) (A) Max. (Typ.) ΔL/L=30% 3.0 (3.8) 2.2 (2.7) 1.8 (2.3) 1.6 (2.0) 最大温度上升电流(3) Temperature Rise Current(3) ∆T=40°C (A) Max. (Typ.) 2.8 (3.3) 2.1 (2.5) 1.8 (2.1) 1.4 (1.6) (1)LCR仪表4284A (Agilent Technologies)或者功能相同的仪器在 1MHz下测试电感值。 (2)通过数码万用表34420A (Agilent Technologies)/ 3541(HIOKI)或者 相类似的工具测试直流电阻。（环境温度为20°C） (3)允许最大直流电的范围是以下两者中比较小的一个：从开始值降低 30%的电感值，或者线圈温度升高40°C。 （参考周围环境温度20°C）。