HPR203

Product Data Sheet 3.0 WATT MINIATURE SIP DC/DC CONVERTER HPR2XX FEATURES Four Channels Of Isolated Power High Output Power Density: > 9. 4 Watts/Inch3 Extended Temperature Range: -25°C To +85°C High Efficiency: To 84% Low Cost The HPR2XX Series is designed for multiple channel applications that require small size and could benefit from a complete onepackage solution. The HPR2XX Series offers four isolated channels of output power in a footprint less than the size of many singular devices. This unregulated series of DC/DC converters provides three watts of total output power. Each isolated channel can supply up to 750mW. The HPR2XX Series uses advanced circuit design and packaging technology to realize superior reliability and performance. With only one switching converter on the board, the HPR2XX eliminates the possibility of separate converters creating beat frequencies, or "aliasing" in multiple channel applications. The high efficiency of the HPR2XX Series means less internal power dissipation than comparable solutions. With reduced heat to dissipate, the HPR2XX Series can operate at higher temperatures with no degradation in reliablility. In addition, the high efficiency of the HPR2XX Series provides greater than 9 watts/inch3 output power density. The HPR2XX Series offers the user low cost without sacrificing reliability. The use of surface mounted devices and manufacturing technologies make it possible to offer premium performance and low cost. High Isolation Voltage: 750V Continuous Input-to-Output and Channel-to-Channel Single In-line Package (SIP) Internal Input and Output Filtering Non-Conductive Case MECHANICAL 2.210+.010 (56.13) PIN CONNECTIONS 1. -VOUT1 5.-VOUT2 0.340+.010 (8.64) 2. COM 1 6. COM2 3 +VOUT1 7.+VOUT2 9. +VIN 10.-VIN 14. -VOUT3 15. COM3 16. +VOUT3 18. -VOUT4 19. COM 4 20. +VOUT4 TOP VIEW 0.340+.010 (8.64) FRONT VIEW 0.030+.010 (0.76) 0.020+.002 (0.51) 0.400+.010 (10.16) RIGHT SIDE VIEW 0.140+.020 (0.25) 0.010+.002 (0.25) 0.050+.015 (1.27) 0.155+.015 (3.94) BOTTOM VIEW 12 3 5 67 9 10 14 15 16 18 19 20 All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: ± 0.015" Marked with: specific model ordered, date code, and job code. HPR2XX REV E MPS 12/08 Page 1 ELECTRICAL SPECIFICATIONS NOMINAL RATED INPUT VOLTAGE (VDC) ±5.2 ±12 ±15 ±12 ±15 ±12 ±15 ±5.0 ±15 RATED OUTPUT VOLTAGE (mA) ±73 ±30 ±25 ±30 ±25 ±30 ±25 ±75 ±25 INPUT CURRENT OUTPUT CURRENT NO LOAD (mA) 70 75 75 30 30 20 20 20 20 (mA) 820 750 750 305 300 240 240 170 155 REFLECTED RIPPLE RATED LOAD CURRENT (mAp-p) 35 35 35 15 15 15 20 20 20 (%) 74 80 80 82 84 83 84 74 81 EF- FICIENCY MODEL HPR203 HPR204 HPR205 HPR210 HPR211 HPR216 HPR217 HPR221 HPR223 (VDC) 5 5 5 12 12 15 15 24 24 Note: Other input to output voltage options may be available. Please consult factory. Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER INPUT Voltage Range CONDITIONS MIN 4.5 10.8 13.5 21.6 At Startup Input to Output, Channel to Channel 60 Hz, 10 seconds 750 750 10 30 4 3 750 Rated Load, Nominal VIN BW = DC to 10MHz BW =10Hz to 2MHz IL=1mA, VOUT = 5V IL=1mA, VOUT = 12V IL=1mA, VOUT = 15V ±5 40 7 8 17 20 .05 High Line to Low Line Rated Load to 1mA Load Rated Load to 1mA Load 1 10 3 300 7 5 20 1.8 450 270 45 TYP 5 12 15 24 MAX 5.5 13.2 16.5 26.4 1 UNITS VDC VDC VDC VDC V/μsec Amps VDC Vpk G pF μArms W mW % mVp-p mVrms VDC VDC VDC %/Deg C %/%VIN % % kHz g % % MHr kHr kHr kHr COMMON SPECIFICATIONS Voltage Rise Time In Rush Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Total Rated Power Rated Power Each Channel Voltage Setpoint Accuracy Ripple & Noise Voltage VISO= 240VAC, 60Hz Temperature Coefficent REGULATION Line Regulation Load Regulation (5V out only) Load Regulation (All other Models) GENERAL Switching Frequency Package Weight Frequency Change MTTF per MIL-HDBK-217, Rev. E Ground Benign Fixed Ground Naval Sheltered Airborne Uninhabited Fighter TEMPERATURE Specification Operation Storage Rated Load to 1mA Load High Line to Low Line Circuit Stress Method TA = +25°C TA = +35°C TA = +35°C TA = +35°C -25 -40 -40 +25 ORDERING INFORMATION Device Family HPR Indicates DC/DC Converter Model Number Selected From Table Above Screening Option +85 +100 +110 °C °C °C HPR 2XX /H ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation............................................................................1.2W Short Circuit Protection.......................................................................< 1 second Page 2 HPR2XX REV E MPS 12/08 TYPICAL PERFORMANCE CURVES 400 375 Frequency (kHZ) 350 325 300 420 390 360 330 Low Line High Line CROSS REGULATION HPR205 31.0 30.5 +VOUT (VDC) 30.0 29.5 Channel 2-4 Frequency (kHZ) Nominal Line 300 29.0 Channel 1 4.5 4.75 5.0 5.25 5.5 0 .75 1.5 2.25 3.0 0 6 12 18 26 Vin (VDC) LOAD REGULATION 6.6 6.2 VOUT (VDC) 5.8 5.4 5.0 VOUT (VDC) 14.0 13.4 12.8 12.2 11.6 Pout (Watts) LOAD REGULATION Input Channel 1 (mA) LOAD REGULATION 0 20 40 60 80 0 8 16 24 32 VOUT (VDC) -0 6.25 12.50 18.75 25 Iout (mA sum of all Outputs) REFLECTED RIPPLE CURRENT vs. Pout 50.0 37.5 25.0 12.5 0 Iout (mA sum of all Outputs) EFFICIENCY vs OUTPUT POWER 90.0 67.5 45.0 22.5 0 Change from Nom Vout (%) +15Vout +12Vout Iout (mA sum of all Outputs) LINE REGULATION 12 6 0 -6 -12 Reflected Ripple Current (mA p-p) Efficiency (Pout/Pin) +5Vout 0 0.8 1.7 2.6 3.4 0 .85 1.7 2.6 3.5 -10 -5 0 5 10 Pout (Watts) Pout (Watts) Pout (Watts) The information provided herein is believed to be reliable; however, MuraTA POWER SOLUTIONS assumes no responsibility for inaccuracies or omissions. MuraTA POWER SOLUTIONS assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. MuraTA POWER SOLUTIONS does not authorize or warrant any MuraTA POWER SOLUTIONS product for use in life support devices/systems or in aircraft control applications. USA: Canada: UK: Mansfield (MA), Tel: (508) 339 3000, email: sales@murata-ps.com Toronto, Tel: (866) 740 1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. France: Japan: China: Germany: München, Tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com Singapore: Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com HPR2XX REV E MPS 12/08 Page 3