MMBF170L, NVBF170L
Power MOSFET
500 mA, 60 V, N−Channel SOT−23
Features
• NVBF Prefix for Automotive and Other Applications Requiring
•
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These Devices are Pb−Free and are RoHS Compliant
http://onsemi.com
500 mA, 60 V
RDS(on) = 5 W
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Drain−Source Voltage
VDSS
60
Vdc
Drain−Gate Voltage
VDGS
60
Vdc
Gate−Source Voltage
− Continuous
− Non−repetitive (tp ≤ 50 ms)
VGS
VGSM
± 20
± 40
Vdc
Vpk
ID
Adc
IDM
0.5
0.8
Symbol
Max
Unit
225
1.8
mW
mW/°C
RqJA
556
°C/W
TJ, Tstg
−55 to
+150
°C
Drain Current − Continuous
− Pulsed
SOT−23
CASE 318
STYLE 21
N−Channel
3
THERMAL CHARACTERISTICS
Characteristic
Total Device Dissipation FR− 5 Board
(Note 1.) TA = 25°C
Derate above 25°C
Thermal Resistance, Junction−to−Ambient
Junction and Storage Temperature
PD
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. FR−5 = 1.0 0.75 0.062 in.
1
2
MARKING DIAGRAM
& PIN ASSIGNMENT
3
Drain
6Z MG
G
Gate 1
2 Source
6Z
= Specific Device Code
M
= Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the
package dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2013
August, 2013 − Rev. 9
1
Publication Order Number:
MMBF170LT1/D
MMBF170L, NVBF170L
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
V(BR)DSS
60
−
Vdc
IGSS
−
10
nAdc
Gate Threshold Voltage (VDS = VGS, ID = 1.0 mA)
VGS(th)
0.8
3.0
Vdc
Static Drain−Source On−Resistance (VGS = 10 Vdc, ID = 200 mA)
rDS(on)
−
5.0
W
ID(off)
−
0.5
mA
Ciss
−
60
pF
td(on)
−
10
ns
td(off)
−
10
OFF CHARACTERISTICS
Drain−Source Breakdown Voltage (VGS = 0, ID = 100 mA)
Gate−Body Leakage Current, Forward (VGSF = 15 Vdc, VDS = 0)
ON CHARACTERISTICS (Note 1)
On−State Drain Current (VDS = 25 Vdc, VGS = 0)
DYNAMIC CHARACTERISTICS
Input Capacitance
(VDS = 10 Vdc, VGS = 0 V, f = 1.0 MHz)
SWITCHING CHARACTERISTICS (Note 1)
Turn−On Delay Time
Turn−Off Delay Time
(VDD = 25 Vdc, ID = 500 mA, Rgen = 50 W)
Figure 1
1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%.
ORDERING INFORMATION
Package
Shipping†
MMBF170LT1G
SOT−23 (TO−236)
(Pb−Free)
3000 / Tape & Reel
MMBF170LT3G
SOT−23 (TO−236)
(Pb−Free)
10000 / Tape & Reel
NVBF170LT1G*
SOT−23 (TO−236)
(Pb−Free)
3000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NVBF Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable.
+25 V
ton
td(on)
125 W
PULSE
GENERATOR
50 W
Vin
20 dB 50 W
ATTENUATOR
40 pF
TO SAMPLING
SCOPE
50 W INPUT
Vout
OUTPUT
INVERTED
Vout
tr
90%
50%
Vin
1 MW
90%
10%
INPUT
50 W
toff
tf
td(off)
90%
50%
10%
PULSE WIDTH
(Vin AMPLITUDE 10 VOLTS)
Figure 1. Switching Test Circuit
Figure 2. Switching Waveform
http://onsemi.com
2
MMBF170L, NVBF170L
TYPICAL ELECTRICAL CHARACTERISTICS
TJ = 25°C
VDS ≥ 10 V
ID, DRAIN CURRENT (A)
1.0
4.5 V
0.8
4.2 V
0.6
4.0 V
3.8 V
3.6 V
3.4 V
3.2 V
3.0 V
2.8 V
0.4
0.2
0
1
2
3
4
5
6
0.6
0.4
TJ = 150°C
0.2
7
TJ = 25°C
TJ = −55°C
1
2
3
4
5
6
7
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
VGS, GATE−TO−SOURCE VOLTAGE (V)
Figure 3. On−Region Characteristics
Figure 4. Transfer Characteristics
TJ = 25°C
15
30
QT
25
12.5
6
5
4
3
VGS = 4.5 V
2
1
0
0.15
VGS = 10 V
0.25
0.35
0.45
0.55
0.65
0.75
0.85
10
VGS
VDS
Qgs
5
Qgd
10
ID = 0.5 A
TJ = 25°C
2.5
0
0.5
1
1.5
ID, DRAIN CURRENT (A)
Qg, TOTAL GATE CHARGE (nC)
Figure 5. On−Resistance vs. Drain Current and
Gate Voltage
Figure 6. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
0.24
0.22
0.20
0.18
0.16
VGS = 0 V
TJ = 25°C
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 7. Diode Forward Voltage vs. Current
http://onsemi.com
3
20
15
7.5
0
8
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
8
7
0.8
0
VGS, GATE−TO−SOURCE VOLTAGE (V)
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
1.0
5.0 V
VGS = 10 V
IS, SOURCE CURRENT (A)
ID, DRAIN CURRENT (A)
1.2
1.0
5
0
2
MMBF170L, NVBF170L
2.4
2.2
2.0
VGS = 10 V
ID = 200 mA
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
−60
−20
20
60
T, TEMPERATURE (°C)
100
140
VGS(th), THRESHOLD VOLTAGE (NORMALIZED)
r DS(on), STATIC DRAIN-SOURCE ON-RESISTANCE
(NORMALIZED)
TYPICAL ELECTRICAL CHARACTERISTICS
1.2
VDS = VGS
ID = 1.0 mA
1.05
1.1
1.10
1.0
0.95
0.9
0.85
0.8
0.75
0.7
−60
Figure 8. Temperature versus Static
Drain−Source On−Resistance
−20
20
60
T, TEMPERATURE (°C)
100
Figure 9. Temperature versus Gate
Threshold Voltage
http://onsemi.com
4
140
MMBF170L, NVBF170L
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AP
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM
THICKNESS OF BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
D
SEE VIEW C
3
HE
E
DIM
A
A1
b
c
D
E
e
L
L1
HE
q
c
1
2
e
b
0.25
q
A
L
A1
MIN
0.89
0.01
0.37
0.09
2.80
1.20
1.78
0.10
0.35
2.10
0°
MILLIMETERS
NOM
MAX
1.00
1.11
0.06
0.10
0.44
0.50
0.13
0.18
2.90
3.04
1.30
1.40
1.90
2.04
0.20
0.30
0.54
0.69
2.40
2.64
−−−
10 °
MIN
0.035
0.001
0.015
0.003
0.110
0.047
0.070
0.004
0.014
0.083
0°
INCHES
NOM
0.040
0.002
0.018
0.005
0.114
0.051
0.075
0.008
0.021
0.094
−−−
MAX
0.044
0.004
0.020
0.007
0.120
0.055
0.081
0.012
0.029
0.104
10°
STYLE 21:
PIN 1. GATE
2. SOURCE
3. DRAIN
L1
VIEW C
SOLDERING FOOTPRINT*
0.95
0.037
0.95
0.037
2.0
0.079
0.9
0.035
SCALE 10:1
0.8
0.031
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MMBF170LT1/D