NSV1C200LT1G

NSS1C200L, NSV1C200L 100 V, 2.0 A, Low VCE(sat) PNP Transistor ON Semiconductor’s e2 PowerEdge family of low VCE(sat) transistors are miniature surface mount devices featuring ultra low saturation voltage (VCE(sat)) and high current gain capability. These are designed for use in low voltage, high speed switching applications where affordable efficient energy control is important. Typical applications are DC−DC converters and power management in portable and battery powered products such as cellular and cordless phones, PDAs, computers, printers, digital cameras and MP3 players. Other applications are low voltage motor controls in mass storage products such as disc drives and tape drives. In the automotive industry they can be used in air bag deployment and in the instrument cluster. The high current gain allows e2PowerEdge devices to be driven directly from PMU’s control outputs, and the Linear Gain (Beta) makes them ideal components in analog amplifiers. www.onsemi.com −100 VOLTS, 2.0 AMPS PNP LOW VCE(sat) TRANSISTOR COLLECTOR 3 1 BASE Features • NSV Prefix for Automotive and Other Applications Requiring • 2 EMITTER Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant 3 1 MAXIMUM RATINGS (TA = 25°C) Symbol Max Unit Collector-Emitter Voltage VCEO −100 Vdc Collector-Base Voltage VCBO −140 Vdc Emitter-Base Voltage VEBO −7.0 Vdc IC −2.0 A ICM −3.0 A Symbol Max Unit Total Device Dissipation TA = 25°C Derate above 25°C PD (Note 1) 490 mW 3.7 mW/°C Thermal Resistance, Junction−to−Ambient RqJA (Note 1) 255 °C/W Total Device Dissipation TA = 25°C Derate above 25°C PD (Note 2) 710 mW 4.3 mW/°C Thermal Resistance, Junction−to−Ambient RqJA (Note 2) 176 °C/W Junction and Storage Temperature Range TJ, Tstg −55 to +150 °C Rating Collector Current − Continuous Collector Current − Peak 2 SOT−23 (TO−236) CASE 318 STYLE 6 MARKING DIAGRAM VL MG G THERMAL CHARACTERISTICS Characteristic Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR− 4 @ 100 mm2, 1 oz. copper traces. 2. FR− 4 @ 500 mm2, 1 oz. copper traces. © Semiconductor Components Industries, LLC, 2007 October, 2016 − Rev. 6 1 1 VL = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Device Package Shipping† NSS1C200LT1G, NSV1C200LT1G SOT−23 (Pb−Free) 3000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Publication Order Number: NSS1C200L/D NSS1C200L, NSV1C200L ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = −10 mAdc, IB = 0) V(BR)CEO Collector −Base Breakdown Voltage (IC = −0.1 mAdc, IE = 0) V(BR)CBO Emitter −Base Breakdown Voltage (IE = −0.1 mAdc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = −140 Vdc, IE = 0) ICBO Emitter Cutoff Current (VEB = −6.0 Vdc) IEBO Vdc −100 Vdc −140 Vdc −7.0 nAdc −100 nAdc −50 ON CHARACTERISTICS hFE DC Current Gain (Note 3) (IC = −10 mA, VCE = −2.0 V) (IC = −500 mA, VCE = −2.0 V) (IC = −1.0 A, VCE = −2.0 V) (IC = −2.0 A, VCE = −2.0 V) 150 120 80 50 Collector −Emitter Saturation Voltage (Note 3) (IC = −0.1 A, IB = −0.01 A) (IC = −0.5 A, IB = −0.05 A) (IC = −1.0 A, IB = −0.100 A) (IC = −2.0 A, IB = −0.200 A) VCE(sat) Base −Emitter Saturation Voltage (Note 3) (IC = −1.0 A, IB = −0.100 A) VBE(sat) Base −Emitter Turn−on Voltage (Note 3) (IC = −1.0 A, VCE = −2.0 V) VBE(on) 240 360 V −0.040 −0.080 −0.115 −0.250 V −0.950 V −0.850 Cutoff Frequency (IC = −100 mA, VCE = −5.0 V, f = 100 MHz) fT MHz Input Capacitance (VEB = 2.0 V, f = 1.0 MHz) Cibo 200 pF Output Capacitance (VCB = 10 V, f = 1.0 MHz) Cobo 22 pF 120 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulsed Condition: Pulse Width = 300 msec, Duty Cycle ≤ 2%. PD, POWER DISSIPATION (W) 0.60 0.50 Note 2 0.40 0.30 Note 1 0.20 0.10 0 0 20 40 60 80 100 120 TA, AMBIENT TEMPERATURE (°C) Figure 1. Power Derating www.onsemi.com 2 140 160 NSS1C200L, NSV1C200L 500 500 VCE = 2 V 150°C 25°C 200 −55°C 100 0.01 0.1 1 25°C 200 −55°C 100 0.01 0.1 1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 2. DC Current Gain Figure 3. DC Current Gain 1 0.1 150°C 25°C −55°C 0.01 0.001 300 0 0.001 10 0.01 0.1 IC/IB = 10 1 10 VCE(sat), COLLECTOR−EMITTER VOLTAGE (V) VCE(sat), COLLECTOR−EMITTER VOLTAGE (V) 0 0.001 VBE(sat), BASE−EMITTER VOLTAGE (V) DC, CURRENT GAIN 300 400 10 1 150°C 0.1 25°C −55°C 0.01 0.001 IC/IB = 50 0.01 0.1 1 10 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 4. Collector−Emitter Saturation Voltage Figure 5. Collector−Emitter Saturation Voltage 1.2 1.0 VBE(sat), BASE−EMITTER VOLTAGE (V) DC, CURRENT GAIN 400 VCE = 4 V 150°C −55°C 0.8 25°C 0.6 150°C 0.4 0.2 0 0.001 IC/IB = 10 0.01 0.1 1 10 1.2 1.0 −55°C 0.8 25°C 0.6 150°C 0.4 0.2 0 0.001 IC/IB = 50 0.01 0.1 1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 6. Base−Emitter Saturation Voltage Figure 7. Base−Emitter Saturation Voltage www.onsemi.com 3 10 VBE(on), BASE−EMITTER VOLTAGE (V) 1.0 −55°C 0.8 25°C 0.6 150°C 0.4 0.2 VCE = 2 V 0 0.001 0.01 0.1 1 10 IC, COLLECTOR CURRENT (A) VCE(sat), COLLECTOR−EMITTER VOLTAGE (V) NSS1C200L, NSV1C200L 1.00 TJ = 25°C 3A 1A 0.10 0.5 A IC = 0.1 A 0.01 1.0E−04 1.0E−02 1.0E−01 1.0E+00 Figure 9. Collector Saturation Region 400 80 COBO, OUTPUT CAPACITANCE (pF) TJ = 25°C fTEST = 1 MHz 300 200 100 0 0 1 2 3 4 5 6 7 8 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 VCB, COLLECTOR BASE VOLTAGE (V) Figure 11. Output Capacitance 100 10 TJ = 25°C fTEST = 1 MHz VCE = 10 V 10 ms 100 80 60 40 20 0 0.001 60 Figure 10. Input Capacitance 140 120 TJ = 25°C fTEST = 1 MHz 70 VCE, EMITTER BASE VOLTAGE (V) IC, COLLECTOR CURRENT (A) CIBO, INPUT CAPACITANCE (pF) 1.0E−03 IB, BASE CURRENT (A) Figure 8. Base−Emitter Saturation Voltage fTau, CURRENT−GAIN BANDWIDTH PRODUCT (MHz) 2A 0.01 0.1 IC, COLLECTOR CURRENT (A) 1 1 ms 1 100 ms Thermal Limit 0.1 0.01 0.1 1 10 VCE, COLLECTOR EMITTER VOLTAGE (V) Figure 12. Current−Gain Bandwidth Product Figure 13. www.onsemi.com 4 100 NSS1C200L, NSV1C200L 1000 D = 0.5 R(t), (°C/W) 100 D = 0.2 D = 0.1 D = 0.05 10 D = 0.02 D = 0.01 1 0.1 0.000001 Single Pulse 0.00001 0.0001 0.001 0.01 0.1 t, PULSE TIME (s) Figure 14. Transient Thermal Resistnce www.onsemi.com 5 1.0 10 100 1000 NSS1C200L, NSV1C200L PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AR D 0.25 3 E 1 2 T HE NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW c SEE VIEW C MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0_ MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 −−− 10 _ MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0_ INCHES NOM MAX 0.039 0.044 0.002 0.004 0.017 0.020 0.006 0.008 0.114 0.120 0.051 0.055 0.075 0.080 0.017 0.022 0.021 0.027 0.094 0.104 −−− 10 _ STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR END VIEW RECOMMENDED SOLDERING FOOTPRINT* 3X 2.90 3X 0.90 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ◊ N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NSS1C200L/D