RDEC71E225K1P1H03B

o Part Numbering Leaded MLCC (Part Number) RC E R7 1H 104 K 1 2 3 4 5 0 M1 H03 A 6 7 8 9 : 1Product ID / 2Series/Terminal Product ID Series/Terminal RH E 150°C Operation Leaded MLCC for Automotive (50Vdc-100Vdc) RH S 200°C Operation Leaded MLCC for Automotive (100Vdc-500Vdc) RD E Leaded MLCC for General Purpose (25Vdc-1kVdc) RC E Leaded MLCC for Automotive (25Vdc-100Vdc) 3Temperature Characteristics Temperature Characteristics Temperature Characteristic Codes Code Reference Temperature Public STD Code 5C C0G EIA 25°C 5G X8G *1 25°C 7G CCG *1 25°C 7J UNJ *1 25°C Temperature Range Operating Temperature Range Capacitance Change or Temperature Coefficient 25 to 125°C 0±30ppm/°C –55 to 25°C 0+30/–72ppm/°C 25 to 150°C 0±30ppm/°C –55 to 25°C 0+30/–72ppm/°C –55 to 25°C 0+30/–72ppm/°C –55 to 125°C –55 to 150°C –55 to 200°C 25 to 125°C 0±30ppm/°C 125 to 200°C 0+72/–30ppm/°C –55 to 25°C –750+120/–347ppm/°C –55 to 200°C 25 to 125°C –750±120ppm/°C 125 to 200°C –750+347/–120ppm/°C 25 to 125°C *2 –750±120ppm/°C –55 to 25°C –750+120/–347ppm/°C 25°C –55 to 125°C ±22% –55 to 125°C EIA 25°C –55 to 125°C +22%, –33% –55 to 125°C *1 25°C –55 to 150°C +15%, –40% –55 to 150°C X7R EIA 25°C –55 to 125°C ±15% –55 to 125°C X9Q *1 25°C –55 to 200°C +15%, –70% –55 to 200°C 7U U2J EIA 25°C C7 X7S EIA D7 X7T L8 X8L R7 Q9 –55 to 125°C *1 Murata Temperature Characteristic Code. *2 Rated Voltage 100Vdc max: 25 to 85°C 6Capacitance Tolerance 4Rated Voltage Code Rated Voltage Code Capacitance Tolerance 1E 25Vdc C ±0.25pF 1H 50Vdc D ±0.5pF 2A 100Vdc J ±5% 2D 200Vdc K ±10% M ±20% 2E 250Vdc 2W 450Vdc 2H 500Vdc 2J 630Vdc 3A 1kVdc 5Capacitance Expressed by three figures. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. Continued on the following page. Continued from the preceding page. 7Dimensions (LxW) RCE Series RHE Series 0 3.6x3.5mm max. Code Lead Style Lead Spacing A2 Straight Long 2.5mm B1 Straight Long 5.0mm RHS Series 3.9x3.5mm max. DB/DG Straight Taping 2.5mm RDE Series 4.0x3.5mm max. or 5.0x3.5mm max. (Depends on Part Number List) E1 Straight Taping 5.0mm K1 Inside Crimp 5.0mm M1/M2 Inside Crimp Taping 5.0mm P1 Outside Crimp 2.5mm S1 Outside Crimp Taping 2.5mm RCE Series RHE Series 1 8Lead Style Dimensions (LxW) Code 4.0x3.5mm max. RHS Series 4.2x3.5mm max. RDE Series 4.5x3.5mm max. or 5.0x3.5mm max. (Depends on Part Number List) 9Individual Specification Code 2 5.5x4.0mm max. Expressed by three figures 3 5.5x5.0mm max. 4 :Packaging 7.5x5.5mm max. 5 7.5x7.5mm max. (630Vdc, 1kVdc: 7.5x8.0mm max.) U 7.5x12.5mm max. (630Vdc, 1kVdc: 7.5x13.0mm max.) W 5.5x7.5mm max. Code Packaging A Ammo Pack B Bulk