Reference Specification
Leaded MLCC for General Purpose
RDE Series
Product specifications in this catalog are as of Mar. 2018, and are subject to change or
obsolescence without notice.
Please consult the approval sheet before ordering.Please read rating and Cautions first.
Reference only
CAUTION
1. OPERATING VOLTAGE
When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p
value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When
the voltage is started to apply to the circuit or it is stopped applying, the irregular voltage may be
generated for a transit period because of resonance or switching. Be sure to use a capacitor within
rated voltage containing these irregular voltage.
When DC-rated capacitors are to be used in input circuits from commercial power source (AC filter),
be sure to use Safety Recognized Capacitors because various regulations on withstand voltage or
impulse withstand established for each equipment should be taken into considerations.
Voltage
DC Voltage
Positional
Measurement Vo-p
DC+AC Voltage
Vo-p
AC Voltage
Vp-p
Pulse Voltage(1)
Vp-p
Pulse Voltage(2)
Vp-p
2. OPERATING TEMPERATURE AND SELF-GENERATED HEAT
Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature
range. Be sure to take into account the heat generated by the capacitor itself.
When the capacitor is used in a high-frequency current, pulse current or the like, it may have the selfgenerated heat due to dielectric-loss. In case of Class 2 capacitors (Temp.Char. : X7R,X7S,X8L, etc.),
applied voltage should be the load such as self-generated heat is within 20 C on the condition of
atmosphere temperature 25 C. Please contact us if self-generated heat is occurred with Class 1
capacitors (Temp.Char. : C0G,U2J,X8G, etc.). When measuring, use a thermocouple of small thermal
capacity-K of 0.1mm and be in the condition where capacitor is not affected by radiant heat of other
components and wind of surroundings. Excessive heat may lead to deterioration of the capacitor’s
characteristics and reliability.
3. Fail-safe
Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that
may be caused by the abnormal function or the failure of our product.
4. OPERATING AND STORAGE ENVIRONMENT
The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the
like are present. And avoid exposure to moisture. Before cleaning, bonding, or molding this product,
verify that these processes do not affect product quality by testing the performance of a cleaned, bonded
or molded product in the intended equipment. Store the capacitors where the temperature and relative
humidity do not exceed 5 to 40 C and 20 to 70%. Use capacitors within 6 months.
5. VIBRATION AND IMPACT
Do not expose a capacitor or its leads to excessive shock or vibration during use.
6. SOLDERING
When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of
the capacitor. Subjecting this product to excessive heating could melt the internal junction solder and
may result in thermal shocks that can crack the ceramic element.
7. BONDING AND RESIN MOLDING, RESIN COAT
In case of bonding, molding or coating this product, verify that these processes do not affect the quality
of capacitor by testing the performance of a bonded or molded product in the intended equipment.
In case of the amount of applications, dryness / hardening conditions of adhesives and molding resins
containing organic solvents (ethyl acetate, methyl ethyl ketone, toluene, etc.) are unsuitable, the outer
coating resin of a capacitor is damaged by the organic solvents and it may result, worst case, in a short
circuit.
The variation in thickness of adhesive or molding resin may cause a outer coating resin cracking and/or
ceramic element cracking of a capacitor in a temperature cycling.
8. TREATMENT AFTER BONDING AND RESIN MOLDING, RESIN COAT
When the outer coating is hot (over 100 C) after soldering, it becomes soft and fragile.
So please be careful not to give it mechanical stress.
EGLEDMNO03
1 / 23
Reference only
Failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial
dispersion when the product is used.
9. LIMITATION OF APPLICATIONS
Please contact us before using our products for the applications listed below which require especially
high reliability for the prevention of defects which might directly cause damage to the third party’s life,
body or property.
1. Aircraft equipment
2. Aerospace equipment
3. Undersea equipment
4. Power plant control equipment
5. Medical equipment
6. Transportation equipment (vehicles, trains, ships, etc.)
7. Traffic signal equipment
8. Disaster prevention / crime prevention equipment
9. Data-processing equipment exerting influence on public
10. Application of similar complexity and/or reliability requirements to the applications listed in the above.
NOTICE
1. CLEANING (ULTRASONIC CLEANING)
To perform ultrasonic cleaning, observe the following conditions.
Rinse bath capacity : Output of 20 watts per liter or less.
Rinsing time : 5 min maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires.
2. Soldering and Mounting
Insertion of the Lead Wire
• When soldering, insert the lead wire into the PCB without mechanically stressing the lead wire.
• Insert the lead wire into the PCB with a distance appropriate to the lead space.
3. CAPACITANCE CHANGE OF CAPACITORS
• Class 2 capacitors (Temp.Char. : X7R,X7S,X8L, etc.)
Class 2 capacitors an aging characteristic, whereby the capacitor continually decreases its capacitance
slightly if the capacitor leaves for a long time. Moreover, capacitance might change greatly depending on
a surrounding temperature or an applied voltage. So, it is not likely to be able to use for the time constant
circuit.
Please contact us if you need a detail information.
NOTE
1. Please make sure that your product has been evaluated in view of your specifications with our product
being mounted to your product.
2. You are requested not to use our product deviating from this specification.
EGLEDMNO03
2 / 23
Reference only
1. Application
This product specification is applied to Leaded MLCC RDE series used for General Electronic equipment.
Do not use these products in any automotive power train or safety equipment including battery chargers
for electric vehicles and plug-in hybrids.
2. Rating
Part number configuration
ex.) RDE
5C
1H
Series
Temperature
Characteristic
Rated
voltage
102
J
0
K1
H03
B
Capacitance
Capacitance
tolerance
Dimension
code
Lead
code
Individual
specification
code
Packing
style
code
Temperature characteristic
Temp.
Code
Temp. Range
Char.
Temp.
coeff.(ppm/C)
C0G
-55～25C
Rated voltage
Code
Rated voltage
1H
DC50V
2A
DC100V
Operating
Temp. Range
25C
-55～125C
0+/-30
25～125C
5C
Standard
Temp.
0+30/-72
Capacitance
The first two digits denote significant figures ; the last digit denotes the multiplier of 10 in pF.
If there is a decimal point, it is expressed by the capital letter “R”. In this case, all figures are
significant digits.
ex.) In case of 102.
10102 = 1000pF
In case of 5R0.
5.0pF
Capacitance tolerance
Code
Capacitance Tolerance
C
+/-0.25pF
D
+/-0.5pF
J
Dimension code
Code
0
1
2
+/-5%
Dimensions (LxW) mm max.
4.0 x 3.5 ( Lead code : K1, M1 )
5.0 x 3.5 ( Lead code : P1, S1 )
4.5 x 3.5 ( Lead code : K1, M1 )
5.0 x 3.5 ( Lead code : P1, S1 )
5.5 x 4.0
ETRDE117E
3 / 23
Reference only
Lead code
Code
Lead style
Lead spacing (mm)
K1
Inside crimp type
5.0+/-0.8
M1
Inside crimp taping type
5.0+0.6/-0.2
P1
Outside crimp type
2.5+/-0.8
S1
Outside crimp taping type
2.5+0.4/-0.2
Lead wire is solder coated CP wire.
Individual specification code
Murata’s control code
Please refer to Part number list .
Packing style code
Code
Packing style
A
Taping type of Ammo
B
Bulk type
3. Marking
Temp. char.
Capacitance
: Letter code : A (C0G Char.)
: Actual numbers (Less than 100pF)
3 digit numbers (100pF and over)
Capacitance tolerance : Code
Rated voltage
: Letter code : 5 (DC50V only. Except dimension code : 0,1)
Letter code : 1 (DC100V only. Except dimension code : 0,1)
Company name code : Abbreviation :
(Except dimension code : 0,1)
(Ex.)
Rated voltage
50V
100V
A
102J
A
332J
563
J5A
103
J1A
Dimension code
0,1
2
ETRDE117E
4 / 23
Reference only
4. Part number list
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Volt.
(V)
Cap.
Cap.
tol.
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
Code (pcs)
RDE5C1H1R0C0P1H03B
C0G
50
1pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H2R0C0P1H03B
C0G
50
2pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H3R0C0P1H03B
C0G
50
3pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H4R0C0P1H03B
C0G
50
4pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H5R0C0P1H03B
C0G
50
5pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H6R0D0P1H03B
C0G
50
6pF ±0.5pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H7R0D0P1H03B
C0G
50
7pF ±0.5pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H8R0D0P1H03B
C0G
50
8pF ±0.5pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H9R0D0P1H03B
C0G
50
9pF ±0.5pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H100J0P1H03B
C0G
50
10pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H120J0P1H03B
C0G
50
12pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H150J0P1H03B
C0G
50
15pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H180J0P1H03B
C0G
50
18pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H220J0P1H03B
C0G
50
22pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H270J0P1H03B
C0G
50
27pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H330J0P1H03B
C0G
50
33pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H390J0P1H03B
C0G
50
39pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H470J0P1H03B
C0G
50
47pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H560J0P1H03B
C0G
50
56pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H680J0P1H03B
C0G
50
68pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H820J0P1H03B
C0G
50
82pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H101J0P1H03B
C0G
50
100pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H121J0P1H03B
C0G
50
120pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H151J0P1H03B
C0G
50
150pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H181J0P1H03B
C0G
50
180pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H221J0P1H03B
C0G
50
220pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H271J0P1H03B
C0G
50
270pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H331J0P1H03B
C0G
50
330pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H391J0P1H03B
C0G
50
390pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H471J0P1H03B
C0G
50
470pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H561J0P1H03B
C0G
50
560pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H681J0P1H03B
C0G
50
680pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H821J0P1H03B
C0G
50
820pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H102J0P1H03B
C0G
50
1000pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H122J0P1H03B
C0G
50
1200pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H152J0P1H03B
C0G
50
1500pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H182J0P1H03B
C0G
50
1800pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H222J0P1H03B
C0G
50
2200pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H272J0P1H03B
C0G
50
2700pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H332J0P1H03B
C0G
50
3300pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
5 / 23
Reference only
Unit : mm
Customer Part Number
DC
Rated
T.C.
Volt.
(V)
Cap.
RDE5C1H392J0P1H03B
C0G
50
3900pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C1H472J1P1H03B
C0G
50
4700pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C1H562J1P1H03B
C0G
50
5600pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C1H682J1P1H03B
C0G
50
6800pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C1H822J1P1H03B
C0G
50
8200pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C1H103J1P1H03B
C0G
50
10000pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C1H123J1P1H03B
C0G
50
12000pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C1H153J1P1H03B
C0G
50
15000pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C1H183J1P1H03B
C0G
50
18000pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C1H223J1P1H03B
C0G
50
22000pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C1H273J2P1H03B
C0G
50
27000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C1H333J2P1H03B
C0G
50
33000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C1H393J2P1H03B
C0G
50
39000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C1H473J2P1H03B
C0G
50
47000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C1H563J2P1H03B
C0G
50
56000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C1H683J2P1H03B
C0G
50
68000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C1H823J2P1H03B
C0G
50
82000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C1H104J2P1H03B
C0G
50
0.1µF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A1R0C0P1H03B
C0G
100
1pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A2R0C0P1H03B
C0G
100
2pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A3R0C0P1H03B
C0G
100
3pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A4R0C0P1H03B
C0G
100
4pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A5R0C0P1H03B
C0G
100
5pF ±0.25pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A6R0D0P1H03B
C0G
100
6pF ±0.5pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A7R0D0P1H03B
C0G
100
7pF ±0.5pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A8R0D0P1H03B
C0G
100
8pF ±0.5pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A9R0D0P1H03B
C0G
100
9pF ±0.5pF
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A100J0P1H03B
C0G
100
10pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A120J0P1H03B
C0G
100
12pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A150J0P1H03B
C0G
100
15pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A180J0P1H03B
C0G
100
18pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A220J0P1H03B
C0G
100
22pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A270J0P1H03B
C0G
100
27pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A330J0P1H03B
C0G
100
33pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A390J0P1H03B
C0G
100
39pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A470J0P1H03B
C0G
100
47pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A560J0P1H03B
C0G
100
56pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A680J0P1H03B
C0G
100
68pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A820J0P1H03B
C0G
100
82pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A101J0P1H03B
C0G
100
100pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
Murata Part Number
6 / 23
Cap.
tol.
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
Code (pcs)
Reference only
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Volt.
(V)
Cap.
Cap.
tol.
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
Code (pcs)
RDE5C2A121J0P1H03B
C0G
100
120pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A151J0P1H03B
C0G
100
150pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A181J0P1H03B
C0G
100
180pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A221J0P1H03B
C0G
100
220pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A271J0P1H03B
C0G
100
270pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A331J0P1H03B
C0G
100
330pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A391J0P1H03B
C0G
100
390pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A471J0P1H03B
C0G
100
470pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A561J0P1H03B
C0G
100
560pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A681J0P1H03B
C0G
100
680pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A821J0P1H03B
C0G
100
820pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A102J0P1H03B
C0G
100
1000pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A122J0P1H03B
C0G
100
1200pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A152J0P1H03B
C0G
100
1500pF
±5%
5.0
3.5
6.0
2.5
2.5 0P1
500
RDE5C2A182J1P1H03B
C0G
100
1800pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C2A222J1P1H03B
C0G
100
2200pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C2A272J1P1H03B
C0G
100
2700pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C2A332J1P1H03B
C0G
100
3300pF
±5%
5.0
3.5
5.0
2.5
3.15 1P1
500
RDE5C2A392J2P1H03B
C0G
100
3900pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A472J2P1H03B
C0G
100
4700pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A562J2P1H03B
C0G
100
5600pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A682J2P1H03B
C0G
100
6800pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A822J2P1H03B
C0G
100
8200pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A103J2P1H03B
C0G
100
10000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A123J2P1H03B
C0G
100
12000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A153J2P1H03B
C0G
100
15000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A183J2P1H03B
C0G
100
18000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C2A223J2P1H03B
C0G
100
22000pF
±5%
5.5
4.0
6.0
2.5
3.15 2P1
500
RDE5C1H1R0C0K1H03B
C0G
50
1pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H2R0C0K1H03B
C0G
50
2pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H3R0C0K1H03B
C0G
50
3pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H4R0C0K1H03B
C0G
50
4pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H5R0C0K1H03B
C0G
50
5pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H6R0D0K1H03B
C0G
50
6pF ±0.5pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H7R0D0K1H03B
C0G
50
7pF ±0.5pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H8R0D0K1H03B
C0G
50
8pF ±0.5pF
4.0
3.5
6.0
5.0
2.5 0K1
500
9pF ±0.5pF
RDE5C1H9R0D0K1H03B
C0G
50
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H100J0K1H03B
C0G
50
10pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H120J0K1H03B
C0G
50
12pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H150J0K1H03B
C0G
50
15pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
7 / 23
Reference only
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Volt.
(V)
Cap.
Cap.
tol.
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
Code (pcs)
RDE5C1H180J0K1H03B
C0G
50
18pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H220J0K1H03B
C0G
50
22pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H270J0K1H03B
C0G
50
27pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H330J0K1H03B
C0G
50
33pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H390J0K1H03B
C0G
50
39pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H470J0K1H03B
C0G
50
47pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H560J0K1H03B
C0G
50
56pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H680J0K1H03B
C0G
50
68pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H820J0K1H03B
C0G
50
82pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H101J0K1H03B
C0G
50
100pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H121J0K1H03B
C0G
50
120pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H151J0K1H03B
C0G
50
150pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H181J0K1H03B
C0G
50
180pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H221J0K1H03B
C0G
50
220pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H271J0K1H03B
C0G
50
270pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H331J0K1H03B
C0G
50
330pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H391J0K1H03B
C0G
50
390pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H471J0K1H03B
C0G
50
470pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H561J0K1H03B
C0G
50
560pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H681J0K1H03B
C0G
50
680pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H821J0K1H03B
C0G
50
820pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H102J0K1H03B
C0G
50
1000pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H122J0K1H03B
C0G
50
1200pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H152J0K1H03B
C0G
50
1500pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H182J0K1H03B
C0G
50
1800pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H222J0K1H03B
C0G
50
2200pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H272J0K1H03B
C0G
50
2700pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H332J0K1H03B
C0G
50
3300pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H392J0K1H03B
C0G
50
3900pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C1H472J1K1H03B
C0G
50
4700pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C1H562J1K1H03B
C0G
50
5600pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C1H682J1K1H03B
C0G
50
6800pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C1H822J1K1H03B
C0G
50
8200pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C1H103J1K1H03B
C0G
50
10000pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C1H123J1K1H03B
C0G
50
12000pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C1H153J1K1H03B
C0G
50
15000pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C1H183J1K1H03B
C0G
50
18000pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C1H223J1K1H03B
C0G
50
22000pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C1H273J2K1H03B
C0G
50
27000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C1H333J2K1H03B
C0G
50
33000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
8 / 23
Reference only
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Volt.
(V)
Cap.
Cap.
tol.
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
Code (pcs)
RDE5C1H393J2K1H03B
C0G
50
39000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C1H473J2K1H03B
C0G
50
47000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C1H563J2K1H03B
C0G
50
56000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C1H683J2K1H03B
C0G
50
68000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C1H823J2K1H03B
C0G
50
82000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C1H104J2K1H03B
C0G
50
0.1µF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A1R0C0K1H03B
C0G
100
1pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A2R0C0K1H03B
C0G
100
2pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A3R0C0K1H03B
C0G
100
3pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A4R0C0K1H03B
C0G
100
4pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A5R0C0K1H03B
C0G
100
5pF ±0.25pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A6R0D0K1H03B
C0G
100
6pF ±0.5pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A7R0D0K1H03B
C0G
100
7pF ±0.5pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A8R0D0K1H03B
C0G
100
8pF ±0.5pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A9R0D0K1H03B
C0G
100
9pF ±0.5pF
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A100J0K1H03B
C0G
100
10pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A120J0K1H03B
C0G
100
12pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A150J0K1H03B
C0G
100
15pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A180J0K1H03B
C0G
100
18pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A220J0K1H03B
C0G
100
22pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A270J0K1H03B
C0G
100
27pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A330J0K1H03B
C0G
100
33pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A390J0K1H03B
C0G
100
39pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A470J0K1H03B
C0G
100
47pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A560J0K1H03B
C0G
100
56pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A680J0K1H03B
C0G
100
68pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A820J0K1H03B
C0G
100
82pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A101J0K1H03B
C0G
100
100pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A121J0K1H03B
C0G
100
120pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A151J0K1H03B
C0G
100
150pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A181J0K1H03B
C0G
100
180pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A221J0K1H03B
C0G
100
220pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A271J0K1H03B
C0G
100
270pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A331J0K1H03B
C0G
100
330pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A391J0K1H03B
C0G
100
390pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A471J0K1H03B
C0G
100
470pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A561J0K1H03B
C0G
100
560pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A681J0K1H03B
C0G
100
680pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A821J0K1H03B
C0G
100
820pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A102J0K1H03B
C0G
100
1000pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
9 / 23
Reference only
Unit : mm
Customer Part Number
DC
Rated
T.C.
Volt.
(V)
Cap.
RDE5C2A122J0K1H03B
C0G
100
1200pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A152J0K1H03B
C0G
100
1500pF
±5%
4.0
3.5
6.0
5.0
2.5 0K1
500
RDE5C2A182J1K1H03B
C0G
100
1800pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C2A222J1K1H03B
C0G
100
2200pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C2A272J1K1H03B
C0G
100
2700pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C2A332J1K1H03B
C0G
100
3300pF
±5%
4.5
3.5
5.0
5.0
3.15 1K1
500
RDE5C2A392J2K1H03B
C0G
100
3900pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A472J2K1H03B
C0G
100
4700pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A562J2K1H03B
C0G
100
5600pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A682J2K1H03B
C0G
100
6800pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A822J2K1H03B
C0G
100
8200pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A103J2K1H03B
C0G
100
10000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A123J2K1H03B
C0G
100
12000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A153J2K1H03B
C0G
100
15000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A183J2K1H03B
C0G
100
18000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
RDE5C2A223J2K1H03B
C0G
100
22000pF
±5%
5.5
4.0
6.0
5.0
3.15 2K1
500
Murata Part Number
10 / 23
Cap.
tol.
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
Code (pcs)
Reference only
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Cap. Cap. tol.
volt.
(V)
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
H0 Code (pcs)
RDE5C1H1R0C0S1H03A
C0G
50
1pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H2R0C0S1H03A
C0G
50
2pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H3R0C0S1H03A
C0G
50
3pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H4R0C0S1H03A
C0G
50
4pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H5R0C0S1H03A
C0G
50
5pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H6R0D0S1H03A
C0G
50
6pF ±0.5pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H7R0D0S1H03A
C0G
50
7pF ±0.5pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H8R0D0S1H03A
C0G
50
8pF ±0.5pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H9R0D0S1H03A
C0G
50
9pF ±0.5pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H100J0S1H03A
C0G
50
10pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H120J0S1H03A
C0G
50
12pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H150J0S1H03A
C0G
50
15pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H180J0S1H03A
C0G
50
18pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H220J0S1H03A
C0G
50
22pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H270J0S1H03A
C0G
50
27pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H330J0S1H03A
C0G
50
33pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H390J0S1H03A
C0G
50
39pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H470J0S1H03A
C0G
50
47pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H560J0S1H03A
C0G
50
56pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H680J0S1H03A
C0G
50
68pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H820J0S1H03A
C0G
50
82pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H101J0S1H03A
C0G
50
100pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H121J0S1H03A
C0G
50
120pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H151J0S1H03A
C0G
50
150pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H181J0S1H03A
C0G
50
180pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H221J0S1H03A
C0G
50
220pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H271J0S1H03A
C0G
50
270pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H331J0S1H03A
C0G
50
330pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H391J0S1H03A
C0G
50
390pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H471J0S1H03A
C0G
50
470pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H561J0S1H03A
C0G
50
560pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H681J0S1H03A
C0G
50
680pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H821J0S1H03A
C0G
50
820pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H102J0S1H03A
C0G
50
1000pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H122J0S1H03A
C0G
50
1200pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H152J0S1H03A
C0G
50
1500pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H182J0S1H03A
C0G
50
1800pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H222J0S1H03A
C0G
50
2200pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H272J0S1H03A
C0G
50
2700pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H332J0S1H03A
C0G
50
3300pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
11 / 23
Reference only
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Cap. Cap. tol.
volt.
(V)
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
H0 Code (pcs)
RDE5C1H392J0S1H03A
C0G
50
3900pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C1H472J1S1H03A
C0G
50
4700pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C1H562J1S1H03A
C0G
50
5600pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C1H682J1S1H03A
C0G
50
6800pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C1H822J1S1H03A
C0G
50
8200pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C1H103J1S1H03A
C0G
50
10000pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C1H123J1S1H03A
C0G
50
12000pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C1H153J1S1H03A
C0G
50
15000pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C1H183J1S1H03A
C0G
50
18000pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C1H223J1S1H03A
C0G
50
22000pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C1H273J2S1H03A
C0G
50
27000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C1H333J2S1H03A
C0G
50
33000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C1H393J2S1H03A
C0G
50
39000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C1H473J2S1H03A
C0G
50
47000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C1H563J2S1H03A
C0G
50
56000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C1H683J2S1H03A
C0G
50
68000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C1H823J2S1H03A
C0G
50
82000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C1H104J2S1H03A
C0G
50
0.1µF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A1R0C0S1H03A
C0G
100
1pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A2R0C0S1H03A
C0G
100
2pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A3R0C0S1H03A
C0G
100
3pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A4R0C0S1H03A
C0G
100
4pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A5R0C0S1H03A
C0G
100
5pF ±0.25pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A6R0D0S1H03A
C0G
100
6pF ±0.5pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A7R0D0S1H03A
C0G
100
7pF ±0.5pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A8R0D0S1H03A
C0G
100
8pF ±0.5pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A9R0D0S1H03A
C0G
100
9pF ±0.5pF
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A100J0S1H03A
C0G
100
10pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A120J0S1H03A
C0G
100
12pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A150J0S1H03A
C0G
100
15pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A180J0S1H03A
C0G
100
18pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A220J0S1H03A
C0G
100
22pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A270J0S1H03A
C0G
100
27pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A330J0S1H03A
C0G
100
33pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A390J0S1H03A
C0G
100
39pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A470J0S1H03A
C0G
100
47pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A560J0S1H03A
C0G
100
56pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A680J0S1H03A
C0G
100
68pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A820J0S1H03A
C0G
100
82pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A101J0S1H03A
C0G
100
100pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
12 / 23
Reference only
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Cap. Cap. tol.
volt.
(V)
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
H0 Code (pcs)
RDE5C2A121J0S1H03A
C0G
100
120pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A151J0S1H03A
C0G
100
150pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A181J0S1H03A
C0G
100
180pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A221J0S1H03A
C0G
100
220pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A271J0S1H03A
C0G
100
270pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A331J0S1H03A
C0G
100
330pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A391J0S1H03A
C0G
100
390pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A471J0S1H03A
C0G
100
470pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A561J0S1H03A
C0G
100
560pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A681J0S1H03A
C0G
100
680pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A821J0S1H03A
C0G
100
820pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A102J0S1H03A
C0G
100
1000pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A122J0S1H03A
C0G
100
1200pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A152J0S1H03A
C0G
100
1500pF
±5%
5.0
3.5
6.0
2.5
2.5
16.0 0S1
2000
RDE5C2A182J1S1H03A
C0G
100
1800pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C2A222J1S1H03A
C0G
100
2200pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C2A272J1S1H03A
C0G
100
2700pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C2A332J1S1H03A
C0G
100
3300pF
±5%
5.0
3.5
5.0
2.5
3.15
16.0 1S1
2000
RDE5C2A392J2S1H03A
C0G
100
3900pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A472J2S1H03A
C0G
100
4700pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A562J2S1H03A
C0G
100
5600pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A682J2S1H03A
C0G
100
6800pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A822J2S1H03A
C0G
100
8200pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A103J2S1H03A
C0G
100
10000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A123J2S1H03A
C0G
100
12000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A153J2S1H03A
C0G
100
15000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A183J2S1H03A
C0G
100
18000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C2A223J2S1H03A
C0G
100
22000pF
±5%
5.5
4.0
6.0
2.5
3.15
16.0 2S1
2000
RDE5C1H1R0C0M1H03A
C0G
50
1pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H2R0C0M1H03A
C0G
50
2pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H3R0C0M1H03A
C0G
50
3pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H4R0C0M1H03A
C0G
50
4pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H5R0C0M1H03A
C0G
50
5pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H6R0D0M1H03A
C0G
50
6pF ±0.5pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H7R0D0M1H03A
C0G
50
7pF ±0.5pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H8R0D0M1H03A
C0G
50
8pF ±0.5pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
9pF ±0.5pF
RDE5C1H9R0D0M1H03A
C0G
50
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H100J0M1H03A
C0G
50
10pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H120J0M1H03A
C0G
50
12pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H150J0M1H03A
C0G
50
15pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
13 / 23
Reference only
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Cap. Cap. tol.
volt.
(V)
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
H0 Code (pcs)
RDE5C1H180J0M1H03A
C0G
50
18pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H220J0M1H03A
C0G
50
22pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H270J0M1H03A
C0G
50
27pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H330J0M1H03A
C0G
50
33pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H390J0M1H03A
C0G
50
39pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H470J0M1H03A
C0G
50
47pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H560J0M1H03A
C0G
50
56pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H680J0M1H03A
C0G
50
68pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H820J0M1H03A
C0G
50
82pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H101J0M1H03A
C0G
50
100pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H121J0M1H03A
C0G
50
120pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H151J0M1H03A
C0G
50
150pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H181J0M1H03A
C0G
50
180pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H221J0M1H03A
C0G
50
220pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H271J0M1H03A
C0G
50
270pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H331J0M1H03A
C0G
50
330pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H391J0M1H03A
C0G
50
390pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H471J0M1H03A
C0G
50
470pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H561J0M1H03A
C0G
50
560pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H681J0M1H03A
C0G
50
680pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H821J0M1H03A
C0G
50
820pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H102J0M1H03A
C0G
50
1000pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H122J0M1H03A
C0G
50
1200pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H152J0M1H03A
C0G
50
1500pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H182J0M1H03A
C0G
50
1800pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H222J0M1H03A
C0G
50
2200pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H272J0M1H03A
C0G
50
2700pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H332J0M1H03A
C0G
50
3300pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H392J0M1H03A
C0G
50
3900pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C1H472J1M1H03A
C0G
50
4700pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C1H562J1M1H03A
C0G
50
5600pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C1H682J1M1H03A
C0G
50
6800pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C1H822J1M1H03A
C0G
50
8200pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C1H103J1M1H03A
C0G
50
10000pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C1H123J1M1H03A
C0G
50
12000pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C1H153J1M1H03A
C0G
50
15000pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C1H183J1M1H03A
C0G
50
18000pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C1H223J1M1H03A
C0G
50
22000pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C1H273J2M1H03A
C0G
50
27000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C1H333J2M1H03A
C0G
50
33000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
14 / 23
Reference only
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Cap. Cap. tol.
volt.
(V)
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
H0 Code (pcs)
RDE5C1H393J2M1H03A
C0G
50
39000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C1H473J2M1H03A
C0G
50
47000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C1H563J2M1H03A
C0G
50
56000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C1H683J2M1H03A
C0G
50
68000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C1H823J2M1H03A
C0G
50
82000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C1H104J2M1H03A
C0G
50
0.1µF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A1R0C0M1H03A
C0G
100
1pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A2R0C0M1H03A
C0G
100
2pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A3R0C0M1H03A
C0G
100
3pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A4R0C0M1H03A
C0G
100
4pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A5R0C0M1H03A
C0G
100
5pF ±0.25pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A6R0D0M1H03A
C0G
100
6pF ±0.5pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A7R0D0M1H03A
C0G
100
7pF ±0.5pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A8R0D0M1H03A
C0G
100
8pF ±0.5pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A9R0D0M1H03A
C0G
100
9pF ±0.5pF
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A100J0M1H03A
C0G
100
10pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A120J0M1H03A
C0G
100
12pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A150J0M1H03A
C0G
100
15pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A180J0M1H03A
C0G
100
18pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A220J0M1H03A
C0G
100
22pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A270J0M1H03A
C0G
100
27pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A330J0M1H03A
C0G
100
33pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A390J0M1H03A
C0G
100
39pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A470J0M1H03A
C0G
100
47pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A560J0M1H03A
C0G
100
56pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A680J0M1H03A
C0G
100
68pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A820J0M1H03A
C0G
100
82pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A101J0M1H03A
C0G
100
100pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A121J0M1H03A
C0G
100
120pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A151J0M1H03A
C0G
100
150pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A181J0M1H03A
C0G
100
180pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A221J0M1H03A
C0G
100
220pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A271J0M1H03A
C0G
100
270pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A331J0M1H03A
C0G
100
330pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A391J0M1H03A
C0G
100
390pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A471J0M1H03A
C0G
100
470pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A561J0M1H03A
C0G
100
560pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A681J0M1H03A
C0G
100
680pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A821J0M1H03A
C0G
100
820pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A102J0M1H03A
C0G
100
1000pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
15 / 23
Reference only
Unit : mm
Customer Part Number
Murata Part Number
DC
Rated
T.C.
Cap. Cap. tol.
volt.
(V)
Dimension (mm)
L
W
W1
F
T
Size Pack
Lead qty.
H0 Code (pcs)
RDE5C2A122J0M1H03A
C0G
100
1200pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
RDE5C2A152J0M1H03A
C0G
100
1500pF
±5%
4.0
3.5
6.0
5.0
2.5
16.0 0M1
2000
RDE5C2A182J1M1H03A
C0G
100
1800pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C2A222J1M1H03A
C0G
100
2200pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C2A272J1M1H03A
C0G
100
2700pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C2A332J1M1H03A
C0G
100
3300pF
±5%
4.5
3.5
5.0
5.0
3.15
16.0 1M1
2000
RDE5C2A392J2M1H03A
C0G
100
3900pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A472J2M1H03A
C0G
100
4700pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A562J2M1H03A
C0G
100
5600pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A682J2M1H03A
C0G
100
6800pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A822J2M1H03A
C0G
100
8200pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A103J2M1H03A
C0G
100
10000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A123J2M1H03A
C0G
100
12000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A153J2M1H03A
C0G
100
15000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A183J2M1H03A
C0G
100
18000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
RDE5C2A223J2M1H03A
C0G
100
22000pF
±5%
5.5
4.0
6.0
5.0
3.15
16.0 2M1
2000
16 / 23
2000
Reference only
5. SPECIFICATIONS AND TEST METHODS
No.
1
2
3
Item
Appearance
Dimension and
Marking
Dielectric
Between
Strength
Terminals
Body
Insulation
Specification
No defects or abnormalities
Within the specified dimensions and
Marking
No defects or abnormalities
No defects or abnormalities
4
Insulation
Between
Resistance Terminals
(I.R.)
10,000M or 500MF min.
(Whichever is smaller)
5
Capacitance
Within the specified tolerance
6
Q
30pF C : Q 1,000
30pF > C : Q 400+20C
C : Nominal Capacitance (pF)
7
Capacitance
Temperature
Characteristics
Within the specified Tolerance.
25C~125C : 0±30 ppm/°C
-55C~25C : 0+30/-72 ppm/°C
Test Method
Visual inspection.
Visual inspection, Using Caliper.
The capacitor should not be damaged when DC
voltage of 300% of the rated voltage is applied
between the terminations for 1 to 5 seconds.
(Charge/Discharge current 50mA.)
The capacitor is placed in a container with metal balls
of 1mm diameter so that each terminal, short-circuit,
is kept approximately 2mm from the balls, and 250%
of the rated DC voltage is impressed for 1 to 5
seconds between capacitor terminals and metal balls.
(Charge/Discharge current 50mA.)
The insulation resistance should be measured with a
DC voltage not exceeding the rated voltage at normal
temperature and humidity and within 2 minutes of
charging.
(Charge/Discharge current 50mA)
The capacitance, Q should be measured at 25C
at the frequency and voltage shown in the table.
Nominal Cap.
C 1000pF
C > 1000pF
Terminal
Strength
Tensile
Strength
Bending
Strength
9
Vibration
Resistance
Termination not to be broken or
loosened
Termination not to be broken or
loosened
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q
30pF C : Q 1,000
30pF > C : Q 400+20C
C : Nominal Capacitance( pF)
10
Solderability of Lead
Solder is deposited on unintermittently
immersed portion in axial direction
covering 3/4 or more in circumferential
direction of lead wires.
ESRDE102B
17 / 23
Voltage
AC0.5 to 5V(r.m.s.)
AC10.2V(r.m.s.)
The capacitance change should be measured after 5
minutes at each specified temperature stage.
The temperature coefficient is determind using the
capacitance measured in step 3 as a reference.
When cycling the temperature sequentially from step
1 through 5 (-55C to +125C) the capacitance should
be within the specified tolerance for the temperature
coefficient and capacitance change as Table A.
The capacitance drift is caluculated by dividing the
differences betweeen the maximum and minimum
measured values in the step 1, 3 and 5 by the
capacitance value in step 3.
Step
1
2
3
4
5
8
Frequency
10.1MHz
10.1kHz
Temperature(C)
252
-553
252
1253
252
As in the figure, fix the capacitor body,
apply the force gradually to each
lead in the radial direction of the
capacitor until reaching 10N and then
keep applied the force for 101 seconds.
F
Each lead wire should be subjected to a force of
2.5N and then be bent 90° at the point of egress in
one direction. Each wire is then returned to the
original position and bent 90° in the opposite
direction at the rate of one bend per 2 to 3 seconds.
The capacitor should be subjected to a simple
harmonic motion having a total amplitude of 1.5mm,
the frequency being varied uniformly between the
approximate limits of 10Hz and 55Hz. The frequency
range, from 10Hz to 55Hz and return to 10Hz, shall be
traversed in approximately 1 minute. This motion
shall be applied for a period of 2 hours in each 3
mutually perpendicular directions (total of 6 hours).
The terminal of capacitor is dipped into a solution of
ethanol (JIS K 8101) and rosin (JIS K 5902) (25%
rosin in weight propotion).Immerse in solder solution
for 20.5 seconds. In both cases the depth of dipping
is up to about 1.5 to 2mm from the terminal body.
Temp. of solder :
2455C Lead Free Solder(Sn-3.0Ag-0.5Cu)
2355C H60A or H63A Eutectic Solder
Reference only
No.
11-1
11-2
11-3
12
Item
Resistance to
Soldering Heat
(NonPreheat)
Resistance to
Soldering Heat
(On-Preheat)
Resistance to
Soldering Heat
(soldering iron
method)
Temperature
Cycle
Specification
Appearance
Capacitance
Change
Dielectric
Strength
(Between
terminals)
Appearance
Capacitance
Change
Dielectric
Strength
(Between
terminals)
Appearance
Capacitance
Change
Dielectric
Strength
(Between
terminals)
Appearance
Capacitance
Change
Q
I.R.
13
14
Humidity
(Steady State)
Humidity Load
Dielectric
Strength
(Between
Terminals)
Appearance
Capacitance
Change
Q
Test Method
No defects or abnormalities
Within 2.5% or 0.25pF
(Whichever is larger)
No defects
The lead wires should be immersed in the melted
solder 1.5 to 2.0mm from the root of terminal at
2605C for 7.5+0/-1 seconds.
No defects or abnormalities
Within 2.5% or 0.25pF
(Whichever is larger)
No defects
The lead wires should be immersed in the melted
solder 1.5 to 2.0mm from the root of terminal at
2605C for 101 seconds.
No defects or abnormalities
Within 2.5% or 0.25pF
(Whichever is larger)
No defects
Test condition
Termperature of iron-tip : 35010C
Soldering time : 3.50.5 seconds
Soldering position
Straight Lead:1.5 to 2.0mm from the root of
terminal.
Crimp Lead:1.5 to 2.0mm from the end of lead
bend.
No defects or abnormalities
Within 5% or 0.5pF
(Whichever is larger)
30pF C : Q 350
10pF C 30pF : Q 275+5C/2
10pF > C : Q 200+10C
C : Nominal Capacitance (pF)
1,000M or 50M·F min.
(Whichever is smaller)
No defects or abnormalities
No defects or abnormalities
Within 5% or 0.5pF
(Whichever is larger)
30pF C : Q 350
10pF C 30pF : Q 275+5C/2
10pF > C : Q 200+10C
I.R.
C : Nominal Capacitance(pF)
1,000M or 50M·F min.
(Whichever is smaller)
Appearance
Capacitance
Change
No defects or abnormalities
Within 5% or 0.5pF
(Whichever is larger)
Q
30pF C : Q 200
30pF > C : Q 100+10C/3
• Post-treatment
Capacitor should be stored for 242 hours at *room
condition.
• Post-treatment
Capacitor should be stored for 242 hours at *room
condition.
• Post-treatment
Capacitor should be stored for 242 hours at
*room condition.
Repeat 5 cycles according to the 4 heat treatments
listed in the following table.
Set at *room condition for 242 hours, then
measure.
Step
Temp
.
(C)
Time
(min.)
1
Min.
Operating
Temp. 3
303
2
Room
Temp.
3 max.
ESRDE102B
18 / 23
303
4
Room
Temp.
3 max.
Set the capacitor at 402C and relative humidty 90
to 95% for 500+24/-0 hours.
Remove and set for 242 hours at *room condition,
then measure.
Apply the rated voltage at 402C and relative
humidity of 90 to 95% for 500+24/-0 hours.
Remove and set for 242 hours at *room condition,
then measure.
(Charge/Discharge current 50mA)
C : Nominal Capacitance(pF)
500M or 25M·F min.
(Whichever is smaller)
* “room condition” Temperature:15 to 35°C, Relative humidity:45 to 75%, Atmosphere pressure:86 to 106kPa
I.R.
3
Max.
Operating
Temp. 3
Reference only
No.
15
Item
High
Temperature
Load
Specification
Appearance
Capacitance
Change
Q
No defects or abnormalities
Within 3% or 0.3pF
(Whichever is larger)
30pF C : Q 350
10pF C 30pF : Q 275+5C/2
10pF > C : Q 200+10C
I.R.
1,000M or 50 M·F min.
(Whichever is smaller)
Marking
Legible
Appearance
No defects or abnormalities
Marking
Legible
Test Method
Apply 150% of the rated voltage at the maximum
operating temperature 3C for 1000+48/-0 hours.
Remove and set for 242 hours at *room condition,
then measure.
(Charge/Discharge current 50mA)
C : Nominal Capacitance (pF)
16
Solvent
Resistance
The capacitor should be fully immersed, unagitated,
in reagent at 20 to 25C for 305 seconds and then
remove gently. Marking on the surface of the
capacitor shall immendiately be visually examined.
Regent : Isopropyl alcohol
* “room condition” Temperature:15 to 35°C, Relative humidity:45 to 75%, Atmosphere pressure:86 to 106kPa
ESRDE102B
19 / 23
Reference only
6. Packing specification
Bulk type (Packing style code : B)
1
2
The number of packing = Packing quantity n
The size of packing case and packing way
1 : Please refer to [Part number list].
2 : Standard n = 20 (bag)
Polyethylene bag
Partition
Note)
The outer package and the number of
outer packing be changed by the order
getting amount.
270 max.
125 max.
340 max.
Unit : mm
Ammo pack taping type (Packing style code : A)
A crease is made every 25 pitches, and the tape with capacitors is packed zigzag into a case.
When body of the capacitor is piled on other body under it.
The size of packing case and packing way
240 max.
Position of label
Unit : mm
340 max.
Hold down tape
Capacitor
51 max.
Base tape
Hold down
tape upper
EKBCRPE01
20 / 23
Reference only
7. Taping specification
7-1. Dimension of capacitors on tape
Inside crimp taping type < Lead code : M1 >
Pitch of component 12.7mm / Lead spacing 5.0mm
0
P
P2
h2
h1
S
Marking
t1
t2
W
W0
L
D0
W1
d
H0
F
P1
W2
e
P0
Unit : mm
Item
Code
Dimensions
Pitch of component
P
12.7+/-1.0
Pitch of sprocket hole
P0
12.7+/-0.2
Lead spacing
F
5.0+0.6/-0.2
Length from hole center to component center
P2
6.35+/-1.3
Length from hole center to lead
P1
3.85+/-0.7
Deviation along tape, left or right defect
S
0+/-2.0
Carrier tape width
W
18.0+/-0.5
Position of sprocket hole
W1
9.0+0/-0.5
H0
16.0+/-0.5
Lead distance between reference and bottom
plane
Remarks
Deviation of progress direction
They include deviation by lead bend .
Deviation of tape width direction
0.5 max.
Protrusion length
Diameter of sprocket hole
D0
4.0+/-0.1
Lead diameter
d
0.50+/-0.05
Total tape thickness
t1
0.6+/-0.3
Total thickness of tape and lead wire
t2
1.5 max.
h1
h2
2.0 max.（Dimension code：W）
1.0 max.（except as above）
Portion to cut in case of defect
L
11.0+0/-1.0
Hold down tape width
W0
9.5 min.
Hold down tape position
W2
1.5+/-1.5
Coating extension on lead
e
Up to the end of crimp
Deviation across tape
ETP1M101
21 / 23
They include hold down tape thickness.
Reference only
Outside crimp taping type < Lead code : S1 >
Pitch of component 12.7mm / Lead spacing 2.5mm
P2
P
h1
0
h2
S
Marking
H0
d
t1
t2
W0
L
D0
W
F
W1
P1
W2
e
P0
Unit : mm
Item
Code
Dimensions
Pitch of component
P
12.7+/-1.0
Pitch of sprocket hole
P0
12.7+/-0.2
Lead spacing
F
2.5+0.4/-0.2
Length from hole center to component center
P2
6.35+/-1.3
Length from hole center to lead
P1
3.85+/-0.7
Deviation along tape, left or right defect
S
0+/-2.0
Carrier tape width
W
18.0+/-0.5
Position of sprocket hole
W1
9.0+0/-0.5
H0
16.0+/-0.5
Lead distance between reference and bottom
plane
Deviation of progress direction
They include deviation by lead bend .
Deviation of tape width direction
0.5 max.
Protrusion length
Diameter of sprocket hole
D0
4.0+/-0.1
Lead diameter
d
0.50+/-0.05
Total tape thickness
t1
0.6+/-0.3
Total thickness of tape and lead wire
t2
1.5 max.
Deviation across tape
Remarks
h1
h2
They include hold down tape thickness.
1.0 max.
Portion to cut in case of defect
L
11.0+0/-1.0
Hold down tape width
W0
9.5 min.
Hold down tape position
W2
1.5+/-1.5
Coating extension on lead
e
Up to the end of crimp
ETP1S101
22 / 23
Reference only
7-2. Splicing way of tape
1) Adhesive force of tape is over 3N at test condition as below.
W
Hold down tape
Base tape
2) Splicing of tape
a) When base tape is spliced
Base tape shall be spliced by cellophane tape.
(Total tape thickness shall be less than 1.05mm.)
Progress direction
in production line
Hold down tape
Base tape
About 30 to 50
Cellophane tape
No lifting for the direction of
progressing
Unit : mm
b) When hold down tape is spliced
Hold down tape shall be spliced with overlapping.
(Total tape thickness shall be less than 1.05mm.)
ape are spliced
Base tape and adhesive tape shall be spliced with splicing tape.
20 to 30
Hold down tape
Progress direction
in production line
Base tape
Unit : mm
c) When both tape are spliced
Base tape and hold down tape shall be spliced with splicing tape.
ETP2R01
23 / 23
Appendix
EU RoHS and Halogen Free
This products of the following crresponds to EU RoHS and Halogen Free
(1) RoHS
EU RoHs 2011/65/EC compliance
maximum concentration values tolerated by weight in homogeneous materials
・1000 ppm maximum Lead
・1000 ppm maximum Mercury
・100 ppm maximum Cadmium
・1000 ppm maximum Hexavalent chromium
・1000 ppm maximum Polybrominated biphenyls (PBB)
・1000 ppm maximum Polybrominated diphenyl ethers (PBDE)
(2) Halogen-Free
The International Electrochemical Commission’s (IEC) Definition
of Halogen-Free (IEC 61249-2-21) compliance
・900 ppm maximum chlorine
・900 ppm maximum bromine
・1500 ppm maximum total chlorine and bromine
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Murata:
RDE5C1H101J0K1C03B RDE5C1H121J0K1C03B RDE5C1H151J0K1C03B RDE5C1H181J0K1C03B
RDE5C1H221J0K1C03B RDE5C1H271J0K1C03B RDE5C1H331J0K1C03B RDE5C1H391J0K1C03B
RDE5C1H471J0K1C03B RDE5C1H561J0K1C03B RDE5C1H681J0K1C03B RDE5C1H821J0K1C03B
RDE5C1H102J0K1C03B RDE5C2A101J0K1C03B RDE5C2A121J0K1C03B RDE5C2A151J0K1C03B
RDE5C2A181J0K1C03B RDE5C2A221J0K1C03B RDE5C2A271J0K1C03B RDE5C2A331J0K1C03B
RDE5C2A391J0K1C03B RDE5C2A471J0K1C03B RDE5C2A561J0K1C03B RDE5C2A681J0K1C03B
RDE5C2A821J0K1C03B RDE5C2A102J0K1C03B RDE5C2A101J0P1C03B RDE5C1H101J0S1H03A
RDE5C1H390J0S1H03A RDE5C1H471J0P1H03B RDE5C1H560J0S1H03A RDE5C1H6R0D0P1H03B
RDE5C1H223J1P1H03B RDE5C1H471J0M1H03A RDE5C1H820J0K1H03B RDE5C1H272J0M1H03A
RDE5C1H103J1M1H03A RDE5C1H100J0M1H03A RDE5C1H150J0P1H03B RDE5C2A221J0S1H03A
RDE5C1H182J0M1H03A RDE5C2A102J0S1H03A RDE5C2A222J1K1H03B RDE5C2A561J0P1H03B
RDE5C2A151J0K1H03B RDE5C1H102J0P1H03B RDE5C1H472J1P1H03B RDE5C2A181J0S1H03A
RDE5C2A820J0S1H03A RDE5C2A3R0C0K1H03B RDE5C1H150J0S1H03A RDE5C2A221J0P1H03B
RDE5C1H1R0C0K1H03B RDE5C2A8R0D0S1H03A RDE5C2A390J0S1H03A RDE5C1H331J0P1H03B
RDE5C1H390J0K1H03B RDE5C2A272J1K1H03B RDE5C2A391J0M1H03A RDE5C1H3R0C0S1H03A
RDE5C1H7R0D0P1H03B RDE5C1H152J0P1H03B RDE5C2A182J1P1H03B RDE5C1H681J0M1H03A
RDE5C1H7R0D0M1H03A RDE5C1H392J0P1H03B RDE5C1H332J0K1H03B RDE5C1H122J0S1H03A
RDE5C2A331J0M1H03A RDE5C1H2R0C0S1H03A RDE5C2A5R0C0S1H03A RDE5C1H682J1M1H03A
RDE5C2A332J1P1H03B RDE5C2A560J0K1H03B RDE5C1H180J0S1H03A RDE5C2A220J0P1H03B
RDE5C1H4R0C0P1H03B RDE5C2A9R0D0P1H03B RDE5C1H123J1S1H03A RDE5C1H682J1S1H03A
RDE5C2A271J0P1H03B RDE5C1H272J0K1H03B RDE5C2A150J0P1H03B RDE5C2A120J0P1H03B
RDE5C2A471J0P1H03B RDE5C2A220J0S1H03A RDE5C1H472J1K1H03B RDE5C1H121J0S1H03A
RDE5C1H183J1K1H03B RDE5C1H8R0D0M1H03A RDE5C1H821J0S1H03A RDE5C1H271J0P1H03B
RDE5C2A390J0K1H03B RDE5C2A270J0M1H03A RDE5C1H8R0D0S1H03A RDE5C2A560J0S1H03A
RDE5C1H8R0D0K1H03B RDE5C1H100J0P1H03B RDE5C1H153J1K1H03B RDE5C1H270J0M1H03A
工商网监
湘ICP备2023018690号
