16SEPC270MX+S.

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SEPC Features ● Super low ESR (5 mΩ to 24 mΩ) capacitance (2700 μF max.) ● RoHS compliance, Halogen free ● Large Specifications Size code B9 C55 C6 C9 E7 E9 E12 E13 F13 Category temperature range –55 °C to +105 °C Rated voltage range (V.DC) 2.5 6.3 2.5 to 16 6.3 to 16 2.5 to 16 16 2.5 to 6.3 2.5 to 16 Rated capacitance range (μF) 100 to 560 220 100 to 560 100 to 820 150 to 1000 180 to 1000 180 to 270 470 to 820 470 to 2700 Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +105 °C, 5000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) E12, E13, F13 Size Unit : mm Polarity marking (−) Lot. No. – L 15 min. 4 min. 19 min. B9, C55, C6, C9, E7, E9 Size fd + R. Voltage fD R. Capacitance – L 15 min. 4 min. 19 min. B9, C55, C6, C9, E7, E9 size flat rubber is used. F Series + F fD fd Size code fD±0.5 L max. F±0.5 fd±0.05 B9 5.0 9.0 2.0 0.6 C55 6.3 5.5 2.5 0.45 C6 6.3 6.0 2.5 0.45 ✽1 C9 6.3 9.0 2.5 0.6 E7 8.0 7.0 3.5 0.6 ✽2 E9 8.0 9.0 3.5 0.6 E12 8.0 12.0 3.5 0.6 E13 8.0 13.0 3.5 0.6 F13 10.0 13.0 5.0 0.6 ✽1 2SEPC390M, 2SEPC560M : 0.5±0.05 ✽2 16SEPC150MD, 10SEPC270M : 0.45±0.05 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Aluminum Solid Capacitors Characteristics list Series Rated Rated voltage capacitance (V.DC) (μF) 100 300 390 470 560 2.5 820 1000 2700 560 4.0 680 820 220 SEPC 470 6.3 10 560 680 1000 1500 270 100 150 16 180 220 270 470 Case size (mm) fD L 5.0 5.0 6.3 5.0 5.0 6.3 6.3 8.0 6.3 8.0 8.0 8.0 8.0 8.0 10.0 6.3 8.0 8.0 8.0 10.0 6.3 6.3 8.0 8.0 6.3 8.0 10.0 8.0 10.0 8.0 6.3 6.3 8.0 8.0 8.0 8.0 8.0 8.0 10.0 9.0 9.0 6.0 9.0 9.0 6.0 9.0 9.0 9.0 7.0 9.0 9.0 13.0 9.0 13.0 9.0 9.0 13.0 13.0 13.0 5.5 9.0 9.0 13.0 9.0 9.0 13.0 7.0 13.0 7.0 6.0 9.0 7.0 9.0 12.0 7.0 9.0 12.0 13.0 Size code B9 C6 B9 C6 C9 E9 C9 E7 E9 E13 E9 F13 C9 E9 E13 F13 C55 C9 E9 E13 C9 E9 E13 E7 F13 E7 C6 C9 E7 E9 E12 E7 E9 E12 F13 Specifications Ripple ✽1 ESR ✽2 current tan d ✽3 (mΩ max.) (mAr.m.s.) 4180 7 0.10 4180 7 0.10 3900 10 0.12 4180 7 0.10 4180 7 0.10 3900 10 0.12 5600 7 0.10 4700 8 0.10 5600 7 0.10 5300 8 0.10 6100 7 0.10 7200 5 0.10 6100 7 0.10 6100 7 0.10 5560 10 0.10 5600 7 0.10 6100 7 0.10 6100 7 0.10 6100 7 0.10 6640 7 0.10 2980 18 0.12 5600 7 0.10 5700 8 0.10 5700 8 0.10 5600 7 0.10 6100 7 0.10 6640 7 0.10 3530 18 0.10 5560 10 0.10 3220 22 0.12 2490 24 0.10 4680 10 0.10 3220 22 0.12 5000 10 0.10 4360 16 0.10 4150 13 0.10 5000 10 0.10 5000 11 0.10 6100 10 0.10 LC ✽4 (μA) Part number 500 500 500 500 500 500 500 280 500 500 500 500 500 500 1350 500 500 500 544 656 280 592 592 592 705 705 857 1260 1890 500 320 500 500 576 576 500 864 864 1504 2SEPC100MZ 2SEPC330MZ 2SEPC390M 2SEPC470MZ 2SEPC560MZ 2SEPC560M 2SEPC560MW 2SEPC560MX 2SEPC820MW 2SEPC820MD 2SEPC820MX 2SEPC820MY 2R5SEPC820M 2SEPC1000MX 2SEPC2700M 4SEPC560MW 4SEPC560MX 4SEPC560M 4SEPC680M 4SEPC820M 6SEPC220M 6SEPC470MW 6SEPC470MX 6SEPC470M 6SEPC560MW 6SEPC560MX 6SEPC680M 6SEPC1000MD 6SEPC1500M 10SEPC270MD 16SEPC100M 16SEPC100MW 16SEPC150MD 16SEPC180MX 16SEPC180M 16SEPC220MD 16SEPC270MX 16SEPC270M 16SEPC470M ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015