63SXE68M.

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SXE Features ● Super ● RoHS high voltage (100 V.DC max.) compliance, Halogen free Specifications Size code E7 F8 E12 Category temperature range –55 °C to +125 °C Rated voltage range 63 V.DC to 100 V.DC Rated capacitance range 6.8 µF to 18 µF 15 µF to 39 µF F13 15 µF to 39 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) 18 µF to 68 µF Please see the attached characteristics list +125 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Damp heat (Steady State) Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Dimensions (not to scale) fD±0.5 fd±0.05 Polarity marking (−) Lot. No. + F Marking – L max. 15 min. 4 min. 19 min. Unit : mm Series Size code R. Capacitance R. Voltage fD±0.5 L max. F±0.5 fd±0.05 E7 8.0 7.0 3.5 0.45 F8 10.0 8.0 5.0 0.50 E12 8.0 12.0 3.5 0.60 F13 10.0 13.0 5.0 0.60 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Aug. 2017 Conductive Polymer Aluminum Solid Capacitors Characteristics list Rated Rated Series voltage capacitance (V.DC) (µF) NEW 63 SXE fD L 18 8.0 7.0 E7 33 8.0 12.0 E12 930 2950 25 0.12 104 63SXE33M 8.0 12.0 E12 930 2950 25 0.12 122 63SXE39M 10.0 8.0 F8 690 2190 50 0.12 122 63SXE39MX 39 LC ✽4 (µA) 56 Part number 63SXE18M NEW 68 10.0 13.0 F13 1030 3280 25 0.12 214 63SXE68M NEW 12 8.0 7.0 E7 340 1100 60 0.12 48 80SXE12M NEW 80 Specifications Ripple ✽1 Allowable ✽1 ESR ✽2 current ripple current tan d ✽3 (mΩ max.) (mAr.m.s.) (mAr.m.s.) 340 1100 60 0.12 Size code NEW NEW Case size (mm) NEW 27 8.0 12.0 E12 780 2490 35 0.12 108 80SXE27M 10.0 8.0 F8 660 2080 55 0.12 108 80SXE27MX 80SXE47M NEW 47 10.0 13.0 F13 980 3100 28 0.12 188 NEW 6.8 8.0 7.0 E7 340 1100 60 0.12 34 100SXE6R8M NEW 15 100 10.0 8.0 F8 630 2000 60 0.12 75 100SXE15MX 8.0 12.0 E12 730 2350 40 0.12 75 100SXE15M NEW 18 10.0 13.0 NEW 22 10.0 13.0 F13 940 3000 30 0.12 90 100SXE18M 940 3000 30 0.12 110 100SXE22M ✽1 Ripple current (100 kHz/ +105 °C < Tx < 125 °C), Allowable ripple current (100 kHz / Tx < 105 °C) ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Aug. 2017